Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹52.9 LAccepted-AOC | L 1 | Accepted-AOC being lowest | |
| 2 | L 2₹63.4 L+₹10.3 L (19.3%)Rejected-AOC | L 2 | Rejected-AOC Not lowest |
Tender Value
₹65 L
EMD Value
₹1.2 L
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PD EANWMM
NWMM INDIA GATE NEW DELHI
REPAIR MAINT OF LEFT OVER WORKS OF NATIONAL WAR MEMORIAL INDIA GATE NEW DELHI
2022_MES_545276_1
PD EANWMM 01 2022 23
Open Tender
Civil Works
Item Rate
120 days
NEW DELHI
Class C cat a i
6 documents required · 6 mandatory
₹1,000
PD EANWMM
₹1.2 L
12 Sept 2022
13 Aug 2022
7 Sept 2022
13 Aug 2022
5 Sept 2022
22 Aug 2022
Amount
Dismantling existing sand stone kerb complete all as specified and as directed by Engineer-in-Charge including necessary earth work for taking out and preparing to receive new stone kerb
Dismantling tiles of any description ie sand stone/Granite/ceramic etc , any thickness and in any position laid dry/wet as in floor / wall jointed ,bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Re-using only of 25 to 35 mm sand stone tiles and/or 30 mm granite tile as in dry cladding on wall / coping , to be fixed with use of new SS-304 grade clamp,10 mm dia SS fastner and SS pin,(01 No per each tile of suitable size as approved) complete all as specified and as directed by Engineer-in-Charge.
Removing cement mortar from dismantled sand stone tile / granite stone tile of any size ( 20/30/40 mm )including cleaning and making it so clean as for re-use in work and finally refixing in same posn/other posn incl pointing with laticrete steller grout to match the shade of granite stone after suitable cuttung od stone.
Taking out existing grout between joints of flooring with blower or manualy and jointed and pointed in white cement mortar 1:3 including tint complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removing/cleaning of existing expansion joint upto 50 mm width incl removal of existing primer ,polyshield ,EPDM sheet , aluminium sheet and M and L applying primer, polyshield based sealent , EPDM sheet 250 mm width , reuse of aluminium sheet in same posn as directed by Engineer-in-Charge. Make as approved
Material and Labour 40 mm thick sand stone tile of size exc 0.25 SqM but n exc 0.50 SqM in area,as in dry cladding having rough surface ,machine cut edges, to be fixed on wall with SS-304 grade clamp,10 mm dia SS fastner and SS pin,(01 No per each tile of suitable size as approved )) including cost of drilling hole in concrete complete all as specified and as directed by Engineer-in-Charge.
Material and Labour 40 mm thick rough dressed sand stone slab in flooring set and jointed in cement and stone dust mortar 1 : 3 and pointed in cement and sand mortar ( 1: 3) with pigment to match including all cuttings and wastes, notching and scrubbing and also for making fair, rounded, chamfered, splayed or bevelled edges, where directed complete all as specified and as directed by Engineer-in-Charge. Note : - Screed bed shall be measured and paid for separately
Material and Labour for 20 mm thick flamed granite tiles (of any size, shape ,type) as in floor machine cut, bedded and jointed in cement mortar (1:3) with grey cement and pointed with laticrete steller grout to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately
All as per above item No 9 but 40 mm thick
Material and Labour for 20 mm thick flamed granite tiles (of any type) machine cut ( radial/straight cutting ) as in steps, risers, jambs, pillars ,ramp machine cut, bedded and jointed in cement mortar (1:3) with grey cement and pointed with laticrete steller grout to to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately
Material and Labour granite tile flooring using 20 mm thick flamed granite tiles (of any type), machine cut (radial cutting), bedded and jointed in cement mortar (1:3) with grey cement and pointed with to laticrete steller grout to match the shade of granite stone complete with grinding and polishing and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately
Material and Labour sand stone slab 25 mm to 35 mm thick dressed true and square, in one piece of size with width up to 800mm and length n exc 1250 mm as in coping to be fixed dry with one number SS-304 grade clamp,10 mm dia SS fastner and SS pin including drilling hole ( 01 per tile )complete all as specified and as directed by Engineer-in-Charge ,
M & L for 40 mm thick sand stone beige coloured coping over column fixed with SS-304 grade clamp,10 mm dia SS fastner and SS pin complete all as specified and as directed by Engineer-in-Charge. Note :- Nos of clamp and fastner as per site requirement.
Supplying and Fixing in repair Grab Bar Stainless Steel 600 mm long complete (Model No. AHS-1507 of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE complete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
M&L for fixing in repair 40 mm thk lakha red granite grating of size 500x500 mm having holes as per existing including necessary cutting grinding etc complete all as specified and as directed by Engineer-in-Charge.
M&L for fixing in repair 40 mm thick Z-brown granite grating size 500x500 mm with holes including necessary cutting grinding etc and matching to existing complete all as specified and as directed by Engineer-in-Charge
M&L for fixing in repair 40 mm thick beige colour granite grating size 500x500 mm with holes including necessary cutting grinding etc and matching to existing all as specified and as directed by Engineer-in-Charge.
M&L screed bed or bedding layer 20 mm thick of cement mortar 1:4 for laying floor finish complete.all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair Urinal Partition (Model No. S4090101 of make "CERA" or equivalent of makes "HINDWARE" / "PARRYWARE" with and including all connected fixtures and accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair 2 Way Bib Tap with Wall Flange complete (Model No. Opp-CHR-15041PM of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE" complete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing n repair Robe Hook CP complete (Model No. CAN-1191N of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE"complete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
S& F in repair Health faucet including wall bracket (Model No. ALD-CHR-579 of make "JAQUAR"'or equivalent of makes "HINDWARE" / "PARRYWARE complete all as specified and as directed by Engineer-in-Charge
Material and installation in repair of 8mm thick Calcium Silicate Board on RCC ceiling including providing a thin layer of approved putty and including 2 coat of oil bound siatemper ( Make as per other items of BOQ ) fixed with nails as diretced by Engineer in Charge.
Supply and Fixing in repair 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles fixed over aluminium frame of approved texture of size 595 mm x 595 mm complete all as directed by Engineer-in-Charge. Note :-Aluminium frame not included in this item
Taking out existing steller grout between joints of flooring / Wall with blower and applying laticrete steller grout as per existing colour in between joints of flooring/wall 1 mm to 3 mm wide and upto 10 mm depth complete all as specified and as directed by Engineer-in-Charge.
M&L in repair Vinyl Retro reflective Stickers on dustbins as per existing pattern complete all as specified and as directed by Engineer-in-Charge.
M&L in repair 21.5 mm clear laminated toughened glass ; glass fixed with spacer tap and sliicon sealant in rectangular shape and size all complete all as specified and as directed by Engineer-in-Charge MAKE = MODIGUARD/SAINT GOBAIN/TRIVENI
M&L in repair 21.5 mm clear laminated toughened glass; glass fixed with spacer tap and sliicon sealant in circular shape and size all complete all as specified and as directed by Engineer-in-Charge MAKE = MODIGUARD/SAINT GOBAIN/TRIVENI
Cleaning of water tank of size 67 m x 6.1 m with both side steps and landing in any situation as under - (a) Dewatering in full from tank using pump/motor of suitable cap and draining out water in nearby drain and (b) Picking brickbats and other items incuding manually scraping the bottom and sides of tank and including removing of collected items with sludge etc using mechanical means outside National war memorial campus and depositing at place approved by NDMC and (c) Spreading approved chemical etc to eliminate foul smell from tank and (d) Presenting tank to a well cleaned condition.
Cleaning of irrigation water tank of size 7.1 m x 7.1 m in any situation as under - (a) Dewatering from tank using pump/motor of suitable cap and draining out water in nearby drain and (b) Picking brickbats and other items incuding manually scraping the bottom and sides of tank and including removing of collected items with sludge etc using mechanical means outside National war memorial campus and depositing at place approved by NDMC and (c) Spreading approved chemical etc to eliminate foul smell from tank and (d) Presenting tank to a well cleaned condition.
Cleaning of irrigation water tank of size 6.1 m x 6.1 m in any situation as under - (a) Dewatering in full from tank using pump/motor of suitable cap and draining out water in nearby drain and (b) Picking brickbats and other items incuding manually scraping the bottom and sides of tank and including removing of collected items with sludge etc using mechanical means outside National war memorial campus and depositing at place approved by NDMC and (c) Spreading approved chemical etc to eliminate foul smell from tank and (d) Presenting tank to a well cleaned condition.
Cleaning of water tank of size 5 m x 5 m in any situation as under - (a) Dewatering from tank using pump/motor of suitable cap and draining out water in nearby drain and (b) Picking brickbats and other items incuding manually scraping the bottom and sides of tank and including removing of collected items with sludge etc using mechanical means outside National war memorial campus and depositing at place approved by NDMC and (c) Spreading approved chemical etc to eliminate foul smell from tank and (d) Presenting tank to a well cleaned condition.
Cleaning of sewer / water tank of size 1.8X1.2X1.8 m in any situation as under - (a) Dewatering in full from tank using pump/motor of suitable cap and draining out water in nearby drain and (b)Mechanically scraping the bottom and sides of tank and including removing of collected items with sludge etc using mechanical means outside National war memorial campus and depositing at place approved by NDMC and (c) Spreading approved chemical etc to eliminate foul smell from tank and (d) Presenting tank to a well cleaned condition.
Cleaning of domestic water tank of size 1mX1 m x 1.8 m in any situation as under - (a) Dewatering in full from tank using pump/motor of suitable cap and draining out water in nearby drain and (b) Picking brickbats and other items incuding manually scraping the bottom and sides of tank and including removing of collected items with sludge etc using mechanical means outside National war memorial campus and depositing at place approved by NDMC and (c) Spreading approved chemical etc to eliminate foul smell from tank and (d) Presenting tank to a well cleaned condition.
M&L for applicator of silicon grouting 10 t0 15 mm width and 10 to 15 mm depth in citation board and alminium frame in between joints of flooring/wall all as specified and as directed by Engineer-in-Charge.
Cleaning ( as per direction of manufacturerer ) and providing one coat of Impregnator pro Sealer for 230mm thick sand stone masonary chemical all as specified and as directed by Engineer-in-Charge. Make fosrock/Laticrate
1.Material and Labour for fixing Granite Tablets (as per existing ) of size 300 mm x 265 mm x 150 mm including polishing front and top area of tablets in any location ie,row and column in existing tyag chakra wall including taking out existing tablets complete all as specified and as directed by Engineer-in-Charge.( painting of Eatching of letters not included in this items ).
M and L for completely removing existing laquer finish using approved chemivcal and covering the iniscibed area of tablet with paper tape and applying 2 coats of acrylic super fine multipurpose premium finish vapcure bright gold paint make MRF ( or equivalent as approved )using spray machine. Interval between 02 coats minimum 01 hour and incl removing tape and scraping excess paint using thinner and blade
M& L Providing two coat of BETONCRYLL PIGMENTATO special, coloured, high coverage, acrylic protective paint over concrete surfaces with dust pickup resistant properties over and including priming with NEOKRYLL transparent, acrylic fixative, exterior grade complete all as specified and as directed by Engr in Charge on existing old surfaces incl filling of cracks with white putty . ( Material make = M/S OIKOS LTD or equivalent as approved by PD ) The work shall be executed in ceing of height 5000 mm from FFL. The equivalent make shall be subjected to chemical composition as mentioned herein by M/S OIKOS
Supplying and fixing in repair of SS caps/studs of size 20 mm dia and 4 mm thick with pins as per sample kept in Executive Agency office complete all as specified and as directed by Engineer-in-Charge.
Grinding bulged out granite stone tile in different locations at joints till it finished with existinf surfaces and including polishing. ( Bulging size n exc 25 mm in width and n exc 5 mm thick )
Material and Labour stone kerb of roughly squared Sand Stone of size 60 cm long x 45 cm height x 10 cm width, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6 mm for top and exposed surfaces of sides and 20 mm for the rest of the surfaces, jointed in cement mortar 1:4 and struck flush cement mortar 1:3 complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for 40 mm thick flamed granite tiles Lakha red (of any size, shape ,type) machine cut ( radial cutting ) as in floor machine cut, bedded and jointed in cement mortar (1:3) with grey cement and pointed with with laticrete steller grout to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately
Material and Labour for 40 mm thick flamed granite tiles Lakha red (of any size, shape ,type) machine cut ( radial/straight cutting ) as in steps, risers, jambs, pillars ,ramp machine cut, bedded and jointed with grey cement and pointed with laticrete steller grout to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately
Material and Labour 40 mm thick sandstone slabs, dressed close picked on exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mortar (1:2) mixed with approved pigment to match as in veneering to walls, pillars, steps etc. complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately
Material and Labour granite tile flooring using (lakha red ) 20 mm thick flamed granite tiles (of any type), machine cut bedded and jointed in cement mortar (1:3) with grey cement and pointed with laticrete steller grout to to match the shade of granite stone complete with grinding and polishing and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.Note : - Screed bed shall be measured and paid for separately
M & L for 20 mm thick sand stone coping and/or wall cladding for citation board bedded and jointed in cement mortar (1:3) with grey cement and pointed with white cement1 : 2 using stone dust with admixture of pigment to match the shade of stonecomplete all as specified and as directed by Engineer-in-Charge. (using beige colour)Note : - Screed bed shall be measured and paid for separately
Material and Labour for 20 mm thick polished granite (of any type) as in floor machine cut, bedded over and incl 15 mm screed bed in CM (1:4) and jointed in cement mortar (1:4) with grey cement and pointed with laticrete steller grout to to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile and pattern of laying as per existing complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for 20 mm thick polished granite (of any type) as in coping machine cut, bedded over and incl 15 mm screed bed in CM (1:4) and jointed in cement mortar (1:4) with grey cement and pointed with laticrete steller grout to to match the shade of granite stone complete and also including all cutting and waste; size of slab / tile as per existing complete all as specified and as directed by Engineer-in-Charge.
Material and labour polished Granite 20mm thick for wall straight/ curve surfaces over and incl 15 mm thick cement mortar 1:4 screed and jointing & pointing with laticrete steller grout to to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.
Material and labour 30 mm polished lakha red Granite in dry cladding with paper joint and fixed with SS-304 grade clamp,10 mm dia SS fastner and SS pin (This item operative only in isolation )complete all as specified and as directed by Engineer-in-Charge. ( 01 nos clamp per tile of size as suiatble and approved )
Material and Labour Flamed Granite 20 mm thick (of any type), for wall lining (veneering to wall)over and incl 15 mm thickrendering cement mortar 1:4 jointing and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.
Material and Labour 20 mm thick sand stone claddingover and incl cement mortar (1:4) 15 mm thick with rough surface, with machine cut edges, uniform colour of each stone size set and jointed in cement and stone dust mortar 1:4 and pointed in cement mix with approved pigment to match as in venering to wall, pillar .complete all as specified and as directed by Engineer-in-Charge
M&L for jointless 30 mm thick polished lakha red granite wet cladding with paper joint on wall surface of tyag chakra wall over and including 15 mm thick CM 1:4 complete all as specified and as directed by Engineer-in-Charge
S&F in repair of 40X40mm Lakha Red granite Strip in (radial/curve) complete all as specified and as directed by Engineer-in-Charge.
Cleaning and refixing of 40X40mm thick lakha red granite strip(radial/curve) with grouting steeler complete all as specified and as directed by Engineer-in-Charge.
Material and Labour in repair for Tactile design made of and including 20 mm thick granite stone tile of size 30 cm x 30 cm laid on screed bed complete all as shown on drawings and as directed by Engineer-in-Charge. Note= Screed bed shall be measured and paid for separately under appropriate item of this BOQ.
Material and Labour in repair for Tactile design made of and including 20 mm thick M 25 concrete tile of size 30 cm x 30 cm laid on screed bed complete all as shown on drawings and as directed by Engineer-in-Charge. Note = Screed bed shall be measured and paid for separately under appropriate item of this BOQ. Make = Unistone/NTC/NITCO/Ultra Johnson/Suryak/Nine stone
Material and Labour glazed ceramic (coloured) tiles of size 300 to 350 mm x 450 mm x 6 mm to 7 mm thick, as in dado / skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick Cement Mortar (1:4) backing coat including triangular filleting on top in Cement Mortar (1:4) and also including all straight cutting and waste of tiles complete all as specified and as directed by Engineer-in-Charge. make= kajaria/H&R Johnson/Cera/Unistone/Somani/Euro/Spartek
Material and Labour vitrified ceramic tiles 10 mm thick (square or rectangular) polished, of light shade, area of each tile not exceeding 0.36 SqM in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 20 mm thick screed bed in cement mortar (1:6) and also including all straight cutting and waste of tiles complete all as specified and as directed by Engineer-in-Charge.make= kajaria/H&R Johnson/Somani/Varmora
Material and Labour in repair 80 mm thick flamed finished granite stone bench of size 1200 mm x 600 mm with and including mounting pedestals of 100 mm thick flamed granite fixed to the base with stainless steel rod of 10 mm dia and 150 mm length embedded in the concrete base complete all as directed by Engineer-in-Charge. Note - (a) The unit rate quoted shall be deemed to include for stone seat as well as pedestals cut to shape and size in monolithic pieces separately and joined together using tongue and groove joined and approved adhesive completeas directed by Engineer-in-Charge. (b) The fixing arrangement of seat on the ground shall be all as specified in the description of item, as directed by Engineer-in-Charge.
Material and Labour in repair 80 mm thick flamed finished granite stone bench of size 1500 mm x 600 mm with and including mounting pedestals of 100 mm thick flamed granite fixed to the base with stainless steel rod of 10 mm dia and 150 mm length embedded in the concrete base complete all as directed by Engineer-in-Charge. Note - (a) The unit rate quoted shall be deemed to include for stone seat as well as pedestals cut to shape and size in monolithic pieces separately and joined together using tongue and groove joined and approved adhesive completeas directed by Engineer-in-Charge. (b) The fixing arrangement of seat on the ground shall be all as specified in the description of item, as directed by Engineer-in-Charge.
Supplying and Fixing in repair butt hinges, type B-12 of 125 mm size, extruded brass with mild steel hinge pin, bright polished, complete all as specified and as directed by Engineer-in-Charge.Make = Argent/Kitch/RS industries/Mowjee
Supplying and Fixing in repair extruded brass handle, 150 mm size, fabricated type polished, of pattern / design as approved, complete all as specified and as directed by Engineer-in-Charge. Make = Argent/Kitch/RS industries/Mowjee
Supplying and Fixing in repair brass barrel tower bolts 200 mm size shoot size 12 mm with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed by Engineer-in-Charge.Make = Argent/Kitch/RS industries/Mowjee
Supplying and Fixing in repair butt hinges, type B-12 of 65 mm size, extruded brass with mild steel hinge pin, bright polished, complete all as specified and as directed by Engineer-in-Charge.Make = Argent/Kitch/RS industries/Mowjee
Supplying and Fixing in repair brass barrel tower bolts 75 mm size shoot 10 mm with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed by Engineer-in-Charge.Make = Argent/Kitch/RS industries/Mowjee
Material and Labour in repair sheet glass, 6.3 mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.MAKE = MODIGUARD/SAINT GOBAIN/TRIVENI
Material and Labour rendering 12 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces including finishing the top surface even and smooth without using extra cement, including Taking down of cement plaster and removing rubbish off complete all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair wash basin of size 505 mm x 435 mm x 180 mm (Model No. KUS-WHT-35601 of Make "JAQUAR"( or equivalent in HINDWARE/PARRYWARE ) ; to be replaced in existing counter top complete as specified and as directed by Engineer-in-Charge. Quoted rate shall include cost of wash hand basin only with allied items to fix in existing counter however all balance fittings/fixtures existing in broken/unservicable appliance shall be reused and cost of labour inclusive in this item.
Supplying and Fixing in repair wall hung wash basin half pedestal of size 550 mm x 400 mm x 200 mm (Model No. CNS-WHT-801 of make "JAQUAR" ( or equivalent in HINDWARE/PARRYWARE ) to be replaced in existing fixture complete as specified and as directed by Engineer-in-Charge. Quoted rate shall include cost of wash hand basin with pedstal only with allied items to fix in existing counter however all balance fittings/fixtures existing in broken/unservicable appliance shall be reused and cost of labour inclusive in this item.
Supplying and Fixing in repair wall hung water closet size 360 mm x 545 mm x 365 mm with PP seat cover, hinges, accessories sets complete (Model No. FLS-WHT-5951 of make "JAQUAR" ( or equivalent in HINDWARE/PARRYWARE ) complete as specified and as directed by Engineer-in-Charge. Quoted rate shall not include cost of seat cover and cistern but all allied items
Supplying and Fixing in repair Indian Type Water Closet size 530 mm x 400 mm (Calina IWC 530 mm x 400 mm) Orissa Pattern complete (Model No. S3010101 of make "CERA" ( or equivalent in HINDWARE/PARRYWARE ) with and including foot rests ,necessary fitting, fixtures and accessories( excluding cistern and flush pipe ) all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair Urinal size 484 mm x 310 mm x 710 mm with fixing accessories set complete (Model No. URS-WHT-13255 of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE") with and including Urinal Sensor (Model No. SNR-CHR-51097) of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE") complete with and including all connected jointing and all necessary fittings, fixtures and accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair Overhead Shower 120 mm dia Round Shape Single Flor (ABS Body Chrome Plated with Grey Face Place) with Rubit Cleaning System complete (Model No. OHS-1789 of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE"complete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair Shower ARM Casted 190 mm Long Flat Shape for Wall Mounted Showers with Flange complete (Model No. SHA-477 of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE"complete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair Single Lever Exposed Parts Kit of Divertor consisting of Operating lever, Wall Flange (with Seals) & Button only (Suitable for Item ALD-065) complete (Model No. LYR-38065K of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE"complete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair Alive Bath Spout with Wall Flange complete (Model No. SPJ-85429 of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWARE"complete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixingin repair Cockroach Trap grating Square complete (Model No. CCR-S-129 of make "camry/Sanjay/Chilly " complete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair 600 mm Towel Bar in Polished Chrome complete (Model No. CAN-1181FHN of make "JAQUAR" or equivalent of makes "HINDWARE" / "PARRYWAREcomplete with and including all fixing accessories all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair bib cock, brass chromium plated, screwed down for 15 mm (½”) dia pipe, Cat Part No. ARI-39037 of make 'JAQUAR'or equivalent of makes "HINDWARE" / "PARRYWARE complete all as specified and as directed by Engineer-in-Charge.
S&F in repair angle valve with wall flange ( model No- -Opp -CHR -15053 PM of make -Jaquar or equivalent of makes "HINDWARE" / "PARRYWARE complete all as specified and as directed by Engineer-in-Charge
S&F in repair waste coupling Chromium plated size 32 mm Make- Jaquar/ complete all as specified and as directed by Engineer-in-Charge.
Supplying and Fixing in repair 450 mm long braided plastic flexible hose with nipple, 15 mm dia as per Cat Part No. ALD803AB of make 'JAQUAR' or equivalent of makes 'HINDWARE' or 'PARRYWARE', for cold water supply at wash basin complete all as specified and as directed by Engineer-in-Charge.
S&F in repair bottle trap with internal parttion 32 mmx250 mm and 190 mm long wall connection pipe and wall flange model no 0 ALD-CHR- 769 L 250 x 190 of make "Jaquar" 'or equivalent of makes "HINDWARE" / "PARRYWARE all as specified and as directed by Engineer-in-Charge
S&F in repair CP quarter turn basin pillar cock model no ARI-39011 of make "Jaquar" 'or equivalent of makes "HINDWARE" / "PARRYWARE complete all as specified and as directed by Engineer-in-Charge
S&F in repair concealed cistern body with installation kit complete set and S type drain pipe connection set to wall hung WC model no JCS -WHT - 2400s of make "Jaquar"'or equivalent of makes "HINDWARE" / "PARRYWARE complete all as specified and as directed by Engineer-in-Charge
Supplying and Fixing in repair Toilet Roll Holder complete (Model No. ACN -CHR1151N of make "JAQUAR" 'or equivalent of makes "HINDWARE" / "PARRYWARE complete with and including all fixing accessories complete all as specified and as directed by Engineer-in-Charge.
S&F in repair water closet seat cover white ,PP suiable for wall hanged English WC model no FLS-WHT-5951 of make Jaquar 'or equivalent of makes "HINDWARE" / "PARRYWARE incl all allied items
Supply and fixing in repair False Ceiling 9mm thick zypsum board fixed over GI frame to the ceiling including 2 to 3 mm white putty complete all as specified and as directed by Engineer-in-Charge. Note :- GI frame not included in this item.
Supplying and Fixing in repair 110 mm dia uPVC (SWR) Vent cowl conforming to IS-14735:1999 complete all as specified and as directed by Engineer-in-Charge.make Supreme/Finolex/Reliance/Kisaan/Vectus/SFMC
Supplying and Fixing in repair 75 mm dia uPVC (SWR) Vent cowl conforming to IS-14735:1999 complete all as specified and as directed by Engineer-in-Charge.
M & L preparation of old steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make of paint - Ist quality of Asian/Berger/ICI dulux/Goodlass Nerolac
M & L for spray painting 1 coat using synthatic enamel paint(white colour) on existing 1 flag pole of ht 12 mtr and 03 flag poles of 09 mtr including use of necessary crane to execute work. complete all as specified and as directed by Engineer-in-Charge. Make of paint - Ist quality of Asian/Berger/ICI dulux/Goodlass Nerolac
M&L Preparation of old painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on cemented surface complete all as specified and as directed by Engineer-in-Charge. Make of paint - Ist quality of Asian/Berger/ICI dulux/Goodlass Nerolac
M&L Preparation of old painted surfaces of any description not exc 10 cm width or girth and applying one coat of synthetic enamel paint on granite surface complete all as specified and as directed by Engineer-in-Charge. Make of paint - Ist quality of Asian/Berger/ICI dulux/Goodlass Nerolac
M&L Preparation of old painted surface on wall of any description and applying one coats of distemper oil emulsion complete including matching to existing surface all as specified and as directed by Engineer-in-Charge.Make =Ist quality of Berger/Asian/Brirish/ICI dulux
M&L Preparation of old painted surface of ceiling of any description and applying one coats of distemper oil emulsion complete including matching to existing surface all as specified and as directed by Engineer-in-Charge.Make =Ist quality of Berger/Asian/Brirish/ICI dulux
Cleaning/washing off efflorocence and calcium deposit using 50/50 of scrub brush, spot treat affected areas with the White Vinegar ; remove the efflorocence & calcium deposit by breaking down minerals crystal with chemicals on joints of all water bodies complete all as specified and as directed by Engineer-in-Charge.( make :Frosch Vinegar Cleaner).
M & L white cement based putty of average thickness 1 to 2 mm on wall / ceiling of approved brand and manufacture , over the plastered wall surface to prepare the surface even and smooth complete all as specified and as directed by Engineer-in-Charge. Make = Birla/Asian/JK
Cleaning / clearing blockage of Western Type WC , Indian type wc, WHB,urinals and floor trap all as specified and as directed by engineer in charge Note :- any material required for cleaning such acid, harpick etc. shall be arranged by the contractor and quoted rate shall be inclusive of this aspect.all as specified and as directed by Engineer-in-Charge.
Cleaning of sewage line of any dia including removal of Sludge, mud and other material and making functional all as specified and as directed by Engineer-in-Charge. (Note:- any material required such as bamboo, ropes and T&P for cleaning shall be arranged by the contractor and quoted rate shall be inclusive of this aspect.)
Cleaning of sewage manhole chamber of any size and depth upto 3.5 mtr using mechanical means including removal of sludge mud or any other material and removal from national war memorial complex complete as specified by Engineer-in-Charge(Note:- any material required such as bamboo, ropes and T&P for cleaning shall be arranged by the contractor and quoted rate shall be inclusive of this aspect.)
Providing & applying melamine polish on wooden door frame involving following process : Cutting of surface, filling of cracks with fevicol and boorada, cutting, application of polish base coat, cutting, repairing and application of polish, water spirit and lakh dana four coats thereafter, cutting, repairing, touch up and filling if any; again application of polish, water spirit and lakh dana four coat and final cleaning and application of spirit as final coat 4-5 times.
Material and Labour solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet and edges painted to match with the printed sheet complete all as specified and as directed by Engineer-in-Charge.Make = Sintex/Rajshree/Dura plast/ECO cell
S&F in repair 3- layer PP-R 25mm pipe fixed to wall or in floor complete all as specified and directed by Engineer-in-charge .Make = Gamson/Safe/Vectus
S&F Waste coupling PTMT 32mm complete all as specified and directed by Engineer-in-charge .(Min wt-45 gms) Make Paryag/Supreme/prince
Material and Labour for fixing flamed Granite Tablets (as per existing ) of size 300 mm x 750 mm x 150 mm including polishing front and top area of tablets in any location ie,row and column in existing tyag chakra wall including taking out existing tablets complete all as specified and as directed by Engineer-in-Charge.( painting of Eatching of letters not included in this items ).
Material and Labour for etching of letters ( Numerical and english Alphabet size capital) on granite stone tablets through compressor machine with sand blasting content cutting as per existing with and including cost of development of prototype stencil for approval before etching of letters and production and all other components , accessiries required as per best trade of practice and all other incidental charges complete all as specified and as directed by Engineer-in-Charge. Note:- (a). Service No and unit Name of martyr in height 1.3 cm , 1.25 mm deep and 3 mm line thickness. (b) Rank and name of martyr in height 1.8 cm , 1.25 mm deep and 3 mm line thickness.
Taking out existing bird spike 2 mm thick mild steel plate of size 600 mm x 300 mm with four no. Hilti anchor bolts in each plate and refixing of same with 4 no. new hilti anchor bolts in each plate complete in any position ( size of bolt 12/10 mm dia and 100 mm long )
Supply and fixing Concealed body for single Liver Divertor 40mm Cat part no. ALDCHR 065 of make Jaquar.
Supply and fixing Angular Stop Cock with wall flange Model No. OPPCHR15053PM of make Jaquar or equivalent of makes "HINDWARE" / "PARRYWARE .
M & L for erasing of letters and numericals on existing tablets complete incl grinding and polishing
Excavation in trenches not exceed 1.5 m wide and not exceed 1.5 m in depth for foundation etc in soft/loose soil.
Returning, filling including spreading levelling, watering and well ramming in layer not exceed 25 cm thick in soft/ loose soil
Supply and fixing in repair Fabricating, Supplying, Fixing and Erecting in position Graphic Panels ( As per existing ) in English & Hindi (bi-lingual) of overall size 1320 mm x 1300 mm fabricated out of 3 mm thick Stainless Steel sheet (304 Grade) with matt finish, Etching of contents (letters and illustrations) on stainles steel sheet, making 04 Nos holes (8mm dia) in the SS sheet and fixing using SS pins and studs complete with and including cost of development of prototypes / mock ups before final approval and production and all other components, accessories required for signage work as per best trade practices and all other incidental charges complete all as shown on drawing, as specified and as directed by Engineer-in-Charge.
Material and Labour for welding of iron work in repair n. exc 2.5cm in length and exc 0.9mm thickness but n. exc. 20mm thick all as specified and directed by Engr-in- Charge.
Fixing only letters of Hindi of size 480/240 mm height composed in two layers of beige and red sand stone, each of 20mm thickness, the letters cut in beige and red sand stones with offset (20mm wide and 10mm thick), pasting the layers of beige and red sand stone together using approved adhesive of makes KERAKOL - H-40 No Limit or equivalent of LATICRETE/ Dr. Fixit, making 6mm dia holes (3 to 4 in numbers for each letter) in the letters fabricated out of beige and red sand sotne.
Supply and fixing letters of English of size 480/240 mm height composed in two layers of beige and red sand stone, each of 20mm thickness, the letters cut in beige and red sand stones with offset (20mm wide and 10mm thick), pasting the layers of beige and red sand stone together using approved adhesive of makes KERAKOL - H-40 No Limit or equivalent of LATICRETE/ Dr. Fixit, making 6mm dia holes (3 to 4 in numbers for each letter) in the letters fabricated out of beige and red sand sotne.
Supply and fixing letters of Hindi of size 480/240 mm height composed in two layers of beige and red sand stone, each of 20mm thickness, the letters cut in beige and red sand stones with offset (20mm wide and 10mm thick), pasting the layers of beige and red sand stone together using approved adhesive of makes KERAKOL - H-40 No Limit or equivalent of LATICRETE/ Dr. Fixit, making 6mm dia holes (3 to 4 in numbers for each letter) in the letters fabricated out of beige and red sand sotne.
S&F in repair Plumeria Obtusa ( White flower) - 2.0 mtr to 3.0 mtr height, 70 mm to 80 mm Caliper 0.8 to 1.0 meter spread (Total diameter) including removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S&F in repair Bauhinia Variegata Candida (White flower) - 1.5 mtr to 2.5 mtr height, 20 mm to 30 mm caliper and 1.0 mtr to 1.5 mtr spread (Total diameter) including removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S&F in repair Mimusops Elengi- 2.0 mtr to 3.0 mtr height, 30 mm to 40 mm Caliper and 0.6 mtr to 1.0 mtr Spread (Total diameter) including removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S&F in repair Magnolia granflora - 2.0 mtr to 2.5 mtr height, 30 mm to 40mm Caliper 0.5 to 1.0 meter Spread (Total diameter) inclding removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S&F in repair Schlelchera Trijuga - 3.0 mtr to 4.0 mtr height, 60 mm to 80mm Caliper and 0.8 mtr to 1.2 meter Spread (Total diameter) including removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S&F in repair Cassial Fistula Alba (White flower) - 2.0 mtr to 3.0 meter height, 60 mm to 80 mm Caliper and 0.7 mtr to1.0 meter Spread ( Total diameter) including removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S & F in repair of trees Lagerstroemia Indica 1.50 m to 2.5 m height, 15 mm to 30 mm caliper and 30 cm to 50 cm spread at site including labour and T&P for planting of tree complete all as specified.
S&F in repair Michelia Champaca (white flower)- 2.0 mtr to 3.0 meter height, 30 mm to 40 mm Caliper 0.5 to 1.0 meter Spread (Total diameter) including removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S&F in repair Cllerodendrum IneRMe-0.9 meter height Hedgeand and removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S&F in repair zephyranthes Candida (white flower)- Carpet effect and and removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
S&F in repair Murraya Exotica (White flower)-0.9 meter height Hedgeand and removal of unserviceable material complete all as specified and as directed by Engr-in-Charge.
Welding of existing flag pole pully upto 12 mtr height n. exc 2.5cm in length and exc 0.9mm thickness but n. exc. 20mm thick all as specified and directed by Engr-in- Charge.The quoted shall include use of suitable crane.
Fixing only in repair 30 mm polished lakha red Granite dry cladding with paper joint and fixed with SS-304 grade clamp,10 mm dia SS fastner and SS pin ( 04 Nos ) as in obelisk upto 13 mtr height complete all as specified and as directed by Engineer-in-Charge. Note:- (i) Rate quoted shall interalia include use and waste of double legged working platform to be made of GI pipe, plates etc. (ii) Stone shall be provided by department free of cost.
Refixing of Soldier Gun with aerldite or other chemical complete.
Cleaning Stone Mural Size( 5.4x2.4mtr) by applying Natural stone protector L 190 sealer MYK LATICRETE or approved material complete all as specified and as directed by Engineer-in-Charge.
S& F 12mm thick commercial plywood for fixing in ventilator fixed with screw or nails complete all as specified and as directed by Engineer-in-Charge. Make = Anchor/Kit ply/Dura Ply/Bhutan/Archid
M&L greasing of base plate of MS gate complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair of 9 V lethium battery in sensor urinal make = Microtek/Amron/Exide/Ultralite
Preparation of old mild steel plate of size 600 mm x 300 mm with 406 no spikes with 5 mm dia and 25 mm high and applying two coats of anti corrosion paint on both side after and including taking out and refixing of same plate with old bolts complete all as specified and as directed by Engineer-in-Charge.Make of paint - Ist quality of Asian/Berger/ICI dulux/Goodlass Nerolac
M&L synthetic enamel paint black colour filling by nozzle in etched letters in stainless steel sheet including cleaning of old enamel paint complete size of SS sheet 450mm x 600 mm .all as specified and as directed by Engineer-in-Charge..Make of paint - Ist quality of Asian/Berger/ICI dulux/Goodlass Nerolac
Taking out and and removing 40 mm thk granite grating from one place to other place in war memorial complex of size 500x500 mm and refixing in new posn including necessary cutting grinding etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for point wiring surface type with two single core 1.5 SqMm (nomonal area) FRLS PVC insulated and unsheathed,multi-stranded, copper condutor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulatorete including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5sq mm and connecting to light, switch, sockets fitting etc complete all as specified and directed for (a) One light point controlled by one, one way switch make of cable = CCI/Finolex/kalinga/Plaza/Polycab , make PVC casing/box = Plaza/Vikas.Kalinga/Premium/Bajaj
All as per above but for One socket out let 5 Amps 5 pin on independent board
Suppliying and Fixing in repair Modular switch 1 way 6 Amps, 1 module, complete all as specified and as directed by Engineer-in-Charge. Make = Anchor/SSK/Legrand/INDOASIAN/ABB
Suppliying and Fixing in repair Modular switch 1 way 16 Amps, 1 module, complete all as specified and as directed by Engineer-in-Charge.Anchor/SSK/Legrand/INDOASIAN/ABB
Suppliying and Fixing in repair Modular type6/166 Amps socket, 2 module, complete all as specified and as directed by Engineer-in-Charge.Anchor/SSK/Legrand/INDOASIAN/ABB
Suppliying and Fixing in repair Modular type 6 Amps socket, 2 module, complete all as specified and as directed by Engineer-in-Charge.Anchor/SSK/Legrand/INDOASIAN/ABB
Supplying and Fixing in repair Miniature Circuit Breaker (MCB) of 2 pole, 6 Amp rating with sensitivity of 16 kA suitable for 240 Volts in the existing MCB DB complete with and including connections, testing and commissioning etc. as required complete all as specified and as directed by Engineer-in-Charge. (Make: Legrand/Havells/ABB / L&T)
Supplying and Fixing in repair Miniature Circuit Breaker (MCB) of 2 pole, 10 Amp rating with sensitivity of 16 kA suitable for 240 Volts in the existing MCB DB complete with and including connections, testing and commissioning etc. as required complete all as specified and as directed by Engineer-in-Charge. (Make: Legrand/Havells/ABB / L&T)
Supplying and Fixing in repair Miniature Circuit Breaker (MCB) of 2 pole, 16 Amp rating with sensitivity of 16 kA suitable for 240 Volts in the existing MCB DB complete with and including connections, testing and commissioning etc. as required complete all as specified and as directed by Engineer-in-Charge. (Make: Legrand/Havells/ABB / L&T)
Supplying and Fixing in repair Miniature Circuit Breaker (MCB) of 4 pole, 40 Amp rating with sensitivity of 16 kA suitable for 240-415 Volts in the existing panel board complete with and including connections, testing and commissioning etc. as required complete all as specified and as directed by Engineer-in-Charge. (Make: Legrand/Havells/ABB / L&T)
Supplying and Fixing in repair Moulded Case Circuit Breaker (MCCB) of 4 pole, 63 Amp rating with sensitivity of 16 KA suitable for 415 Volts in the existing panel board complete with and including connections, testing and commissioning etc. as required complete all as specified and as directed by Engineer-in-Charge. (Make: Legrand/Havells/ABB / L&T)
Supplying, Laying and Testing in repair Cat 6 UTP cable for CCTV and BMS System with all teRMinations crimping etc. complete all as specified and as directed by Engineer-in-Charge.CCI/Finolex/kalinga/Plaza/Polycab
Supplying, Laying and Testing in repair 2 x 1.5 sq. mm. Copper Power Cable for powering all the cameras complete all as specified and as directed by Engineer-in-Charge. ( Make : CCI/Finolex/kalinga/Plaza/Polycab
Supplying, Laying, Testing and Commissioning in repair ARMed cable 1.5 mm size, Three Core (Flat) complete all as specified and as directed by Engineer-in-Charge. ( Make: CCI/Finolex/kalinga/Plaza/Polycab
Supplying, Laying, Testing and Commissioning in repair ARMed cable 2.5 mm size, Three Core (Flat) complete all as specified and as directed by Engineer-in-Charge. ( Make: Finolex & Poyicab)
Supplying, Laying, Testing and Commissioning cable in repair 4 mm size, Three Core (Flat) complete all as specified and as directed by Engineer-in-Charge. ( Make: Finolex & Polycab)
Supplying, Laying, Testing and Commissioning in repair wire / cable 2.5 sq. mm. 2 Core (round) complete all as specified and as directed by Engineer-in-Charge. ( Make: CCI/Finolex/kalinga/Plaza/Polycab
Supplying, Installing, Testing and Commissioning in repair Flower Jet Nozzle 32 / 24 of Cast Bronze & Machined Brass of 32 mm inlet size, 140 mm nozzle height and 24 Nos. total outlets complete all as specified and as directed by Engineer-in-Charge.make Ripples/Aquascape
Supplying, Installing, Testing and Commissioning in repair Crown Nozzle 10 mm of Machined Brass / Gunmetal having 12 mm inlet size, 10 mm bore outlet size and height of nozzle 75 mm complete all as specified and as directed by Engineer-in-Charge.make Ripples/Aquascape
Supply, & Fixing in repair of 20 Watt LED Batten Light Fitting (Bajaj/phillips/Surya/Syska/wipro Make)
Supply & Fixing in repair of 12 Watt LED Circular Recess Mounted Fitting (Bajaj/phillips/Surya/Syska/wipro Make)
Supply & Fixing in repair of 18 Watt LED Square Recess Mounted Fitting (Bajaj/phillips/Surya/Syska/wipro Make)
Supply & Fixing in repair of 10 Watt LED Bulk Head Fitting (Bajaj Make Model WEE Plus or phillips/Surya/Syska/wipro Make)
Supply & Fixing in repair of 10 Watt LED Circular Surface Mounted Fitting ((Bajaj/phillips/Surya/Syska/wipro Make)
Supplying, Installing, Testing and Commissioning in repair Exterior Recessed Built into PlatfoRM, 60 mm dia 7 W LED wide distribution uplight fixture with Housing Box of Stainless Steel, clear / frosted glass optics, with D.C. power supply, installation cover and other necessary accessories with and including 7 W LED lamp suitable for the fixture and also including the mounting and fixing accessories and arrangements and also complying with the following requirements / specifications all as specified and as directed by Engineer-in-Charge: (a) Lamp Type : 7 Watt LED (b) Fixture Wattage : 7 Watt (c) Lumen Efficacy : 130 Lumens / Watt (d) CCT / CRI : 3000 K / + 80 (e) Optical Distribution : 650 Distribution (f) Voltage : 24 V DC (g) Type of Control Gear : Non-Integral Electronic Driver (h) Control Type : Dimmable (j) I.P. Rating : IP-66 (k) Size : Dia 60 mm, Height 70 mm or of the size as approved by Engineer-in-Charge. (l) Make of Fixture & Lamp : Aldbara/phillips/Havells?Bajaj as approved by Engineer-in-Charge Note- (a) The rate quoted shall be deemed to include for providing the light fixture complete with lamps of the same manufacturer / make as approved by the Engineer-in-Charge. (b) The rate quoted shall also be deemed to include for material and labour and all other incidental charges required for fixing and mounting arrangements for the fixture including recessing and other civil works as per manufacturer's design and specifications and requirements and also as per site conditions as approved by Engineer-in-Charge.
Supplying, Installing, Testing and Commissioning in repair Exterior Recessed Ground Mounted 40 mm dia 1 W LED diffused distribution light fixture with Housing Box of die cast aluminium, stainless steel trim, clear glass optics, with D.C. power supply and other necessary accessories with and including 1 W LED lamp suitable for the fixture and also including the mounting and fixing accessories and arrangements and also complying with the following requirements / specifications all as specified and as directed by Engineer-in-Charge: - (a) Lamp Type : 1 Watt LED (b) Fixture Wattage : 1 Watt (c) Lumen Efficacy : 114 Lumens / Watt (d) CCT / CRI : 3000 K / + 80 (e) Optical Distribution : Diffused (f) Voltage : 12 V DC (g) Type of Control Gear : Remote Electronic Power Supply (h) Control Type : Switched (j) I.P. Rating : IP-68 (k) Size : Dia 35 mm, Height 23 mm or of the size as approved by Engineer-in-Charge. (l) Make of Fixture & Lamp : BAJAJ/HAVELLS/PHILLIPS as approved by Engineer-in-Charge Note (a) The rate quoted shall be deemed to include for providing the light fixture complete with lamp of the same manufacturer / make as approved by the Engineer-in-Charge. (b) The rate quoted shall also be deemed to include for material and labour and all other incidental charges required for fixing and mounting arrangements for the fixture including recessing and other civil works as per manufacturer's design and specifications and requirements and also as per site conditions as approved by Engineer-in-Charge.
Supplying, Installing, Testing and Commissioning in repair Exterior Recessed Wall Mounted 8 W LED asymmetric light fixture with Housing Box of Stainless Steel, clear glass optics, installation cover and other necessary accessories with and including 8 W LED lamp suitable for the fixture and also including the mounting and fixing accessories and arrangements and also complying with the following requirements / specifications all as specified and as directed by Engineer-in-Charge: - (a) Lamp Type : 8 Watt LED (b) Fixture Wattage : 8 Watt (c) Lumen Efficacy : 116 Lumens / Watt (d) CCT / CRI : 3000 K / + 80 (e) Optical Distribution : Asymmetric (f) Voltage : 240 V AC (g) Type of Control Gear : Integral Electronic Driver (h) Control Type : Switched (j) I.P. Rating : IP-65 (k) Size : Length 120 mm, Width 75 mm, Height 120 mm or of the size as approved by Engineer-in-Charge. (l) Make of Fixture & Lamp : Havells/PHILLIPS/BAJAJ as approved by Engineer-in-Charge Note f (a) The rate quoted shall be deemed to include for providing the light fixture complete with lamp of the same manufacturer / make as approved by the Engineer-in-Charge. (b) The rate quoted shall also be deemed to include for material and labour and all other incidental charges required for fixing and mounting arrangements for the fixture including recessing and other civil works as per manufacturer's design and specifications and requirements and also as per site conditions as approved by Engineer-in-Charge.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Supplying, Laying, Jointing Testing and Commissioning in repair HDPE pipes 50 mm dia 6 kgf / cm2 conforming to IS 4984:1995 with electro fusion joint in trenches, with pipes and including all fittings such as bends, elbows, tees, adoptors, sockets, unions, plugs, and hose clips including excavation,earth work and refilling etc complete all as specified and as directed by Engineer-in-Charge.
Supplying, Laying, Jointing ,Testing and Commissioning in repair HDPE pipes 65 mm dia 6 kgf / cm2 conforming to IS 4984:1995 with electro fusion joint in trenches, with pipes and including all fittings such as bends, elbows, tees, adoptors, sockets, unions, plugs, and hose clips including excavation,earth work and refilling etc complete all as specified and as directed by Engineer-in-Charge.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
INGENIOUS CREATIONS INDIA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .