Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.3 CrAccepted-AOC | ₹5.3 Cr | 1 | Accepted-AOC L1 |
| 2 | 2₹5.5 Cr+₹26.6 L (5.04%)Rejected-Finance | ₹5.5 Cr+₹26.6 L (5.04%) | 2 | Rejected-Finance L 2 |
Tender Value
₹5.2 Cr
EMD Value
₹10.5 L
Closing Date
14 May 2020, 5:00 pmClosed
SE, 4, Infra 1, GMDA
Plot no 3, sector 44, Gurugram.
Construction of Master Road and Road side drains of Sector 68 Gurugram
2020_HRY_124735_2
Job No. 5/2020/Infra-I
Open Tender
Civil Works
Works
180 days
sector 68
Please refer Tender documents.
3 documents required · 3 mandatory
₹1
GMDA
₹10.5 L
Yes
10 Sept 2020
4 May 2020
15 May 2020
4 May 2020
14 May 2020
4 May 2020
Amount
Construction of earth work in subgrade in layers to specifications with road roller/sheep foot roller and tractor or any other like machinery under suitable moisture contents with desired field density not less than 95% maximum dry density (ordinary proctor test)
Construction of earth work in embankment in layers to specifications with road roller/sheep foot roller and tractor or any other like machinery under suitable moisture contents with desired field density not less than 97% maximum dry density (ordinary proctor test)
Supply and filling of earth in layers to specifications with road roller/sheep foot roller and tractor or any other like machinery under suitable moisture contents with desired field density not less than 97% maximum dry density (ordinary proctor test)
Providing and laying spreading and compacting of 200mm thick Granular Sub – Base (GSB) material of natural sand, murram, gravel crushed stone and combination thereof as per MORT&H specification (confirming to clause 401 coarse graded, grading - II as per table 400.2 MORT & H) including spreading on the prepared sub grade with the help of motor grader of adequate capacity maintaining the required slope and grade during operation rolling with vibratory roller of minimum 8 –10 tone (MORTH 401.4.2)with the grade and cross fall (camber) to be checked and any high spot or depressions which becomes apparent corrected by removing or adding fresh material including cost of tools and plants, carriage of material from stacks, templates, barrier, lighting arrangement at night Chowkidar & mtc. of diversion etc. complete in all respect as per MORT & H specification drawing & direction of Engineer – in – Charge, density of GSB as laid 2 gms /c.c.
Providing , laying, spreading and compacting hand broken / crushed stone aggregate 250 mm thick Wet Mix Macadam (WMM) confirming to physical requirement laid in table 400.10 of MORT &H specifications and grading laid in table 400.11 of MORT and H specification in 2 layers compacted to 250mm (125+125) including premixing of material with water in mixing plant for Wet Mix Macadam, carriage of mixed material by tippers to the site and laying material in uniform thickness and spreading by paver finisher motor grader of adequate capacity, rolling with vibratory roller of minimum static weight of 80 to 100 KN (Refer 406.3.5) in stages to grade and any spot depressions which becomes apparent corrected by removing or adding fresh material and camber spreading and brooming including template, barrier, lighting arrangement at night, Chowkidar & Mtc. of diversion etc. complete in all respect as per clause 406 OF MORT&H drawing & direction of Engineer – in – Charge to the entire satisfaction of the Engineer –in –charge, density of WMM as laid 2.2. gms / c.c. complete in all respect to the entire satisfaction of the Engineer – in – charge.
Providing and laying of prime coat 60 Kg on GRANULAR/WMM/WBM SURFACE
Providing and laying tack coat 20 kg per 100 sqm on the prepared bituminous/granular surface cleaned with mechanical broom.
Providing and laying of 50mm thick compacted Dense Bitumen Macadam (DBM) using coarse aggregate size ranging from 26.5mm to 90 micron and bitumen grade 60/70 or VG – 30 grade with bitumen contends of minimum 4.50% of total weight of mix prepared including consolidation as per by latest MORT & H Section 500 & 507 specification with computerized hot mix plant and laying and consolidation at site of work for all lead with mechanical sensor paver and rolling with road roller as per MORT & H clause No. 507.4.9 giving density not less than 2.35 gm / c.c. and competing as per job mix formula complete with in all respect.( including cost of bitumen) to entire satisfaction of Engineer – in Charge
Providing and laying of 40mm thick Bituminous Concrete (BC) with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, coarse aggregate of nominal size 11.2mm grade – I and coarse sand of size 2.80mm to 90 micron, premixed with bituminous binder VG – 30 @ 5.40% percent by weight of mix and cement filler, transporting the hot mix to work site, laying [as per 501.5.3 to 501.5.4] with a sensor paver & with finisher of sensor paver will be minimum 7 M wide and rolling with road roller and vibratory roller with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers [as per MORT & H clause 501.6 & 501.7] to achieve the desired compaction as per MORT & H specification clause No. 509 complete in all respect. (40mm thick), giving density not less than 2.40 gm / c.c. to the entire satisfaction of the Engineer –in charge
Providing and laying of thermoplastic paint 2mm thick to be marked with automatic machine of 100mm width marking on central line on roads, as per MOST specification No. 803 including cost of paint material and contingency material as required complete in all respect to the entire satisfaction of Engineer –in –charge (Hitco Make) or any other reputed make as asked by the Engineer – in - charge.
Providing & fixing of Cast in situ Cement concrete M-20 with stone aggregate 20 mm nominal size in Kerbs and the like items, placing & fixing in position complete in all respect for Gurgaon
Providing & fixing of Cast in situ Cement concrete M-20 with stone aggregate 20 mm nominal size in Channel and the like items, placing & fixing in position complete in all respect.
Providing and fixing of RCC Drain Cover on SW drain Size (900 x600x90mm).
Providing and Laying Precast GRC paving tiles in M-40, 22 mm thick complete in all respect.
Providing and fixing Square Road Stud / cat eyes, For Road and Driveway as per Product Specification i.e. Color: Yellow, Red, White. Shape in Square of Plastic of Brand:3M, pioneer, H2 Safety or any other reputed brand after approval and entire satisfaction of engineer-in-charge. Complete in all respect. (700m/3=234 x 3=702 Nos)
Providing and fixing Aluminum Reflective and Solar Stud as per Product Specification of Size: 125mm x 125mm x 20mm of Brand: 3M, pioneer, H2 Safety or any other reputed brand after approval and entire satisfaction of engineer-in-charge. Complete in all respect. (4 x 10=40 Nos)
Providing and fixing MS Pipe Delineators made up of Aluminum material with MS 3 pipe powder quoting with reflective tape & best performance to show the road geometry during day and night with a Dimension of 75x1200mmBrand: 3M, pioneer, H2 Safety or any other reputed brand after approval and entire satisfaction of engineer-in-charge. Complete in all respect. (700/30=24x4=96 Nos)
Providing and fixing Two Way Hazard Marker made up of Aluminium Shape in Rectangular, Brand: 3M, pioneer, H2 Safety or any other reputed brand after approval and entire satisfaction of engineer-in-charge. Complete in all respect
Providing and fixing Median Markers, Features: • Ensures safety • Lightweight • High visibility Brand: 3M, pioneer, H2 Safety or any other reputed brand after approval and entire satisfaction of engineer-in-charge.Complete in all respect.
Red And White 3M Reflective Tape, Product Specification:- Color :Red, Yellow, White Packaging Type: Roll Pattern :Plain Waterproof :Yes Length: 200 m Width :1-2" Brand: 3M, pioneer, H2 Safety or any other reputed brand after approval and entire satisfaction of engineer-in-charge.
Providing and fixing Road Safety Signs of ACP, Aluminium SheetReflective :3M Retro-ReflectiveSize :As per IRC (4x6= 24 Sq ft)Brand: 3M, pioneer, H2 Safety or any other reputed brand after approval and entire satisfaction of engineer-in-charge with iron angle of size 50mm x 50mm x 6mm with height 3.75m complete in all respect.
Providing and fixing Solar Delineator With all Fittings Battery :2 x 12 V, 1600 mAh Brand :H2 Safety India Width: 135 mm Material :Polycarbonate and ABS Water Proof Brand: 3M, pioneer, H2 Safety or any other reputed brand after approval and entire satisfaction of engineer-in-charge. complete in all respect.
Bidder Name
Amount
arya construction company
DEVOTE CONSTRUCTION COMPANY
DEVOTE CONSTRUCTION COMPANY
arya construction company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .