Estimate for Re Lining Lining of WC by Laying Underground Pipeline of OL RD 23000 R of Barnala Disty village Jahangi, Rajomajra Dist Sangrur (Laying and Jointing of UPVC UGPL system and other allied works in construction of watercourse

Amount

Dag Belling double kassi stroke V-Shape minimum 10 cm depth

Exacavation by mechanical means (JCB or Hydrulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming. Earth work excavation trimming and dressing of sides, leveling of beds of trenches to correct grade, cutting joint holes,refilling, consolidation, watering, including the cost of dewatering of rain water,Diversion for traffic, nightsignals.Providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing etc.and removal of surplus soil outside/inside the town involving lead upto 15mtr. complete in all respect. In all classes of soil except rocky.

Laying, fixing and jointing of UPVC Pipes as per ISI 4985 (ISI marked with the prior approval of Engineer-inCharge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specification .225 mm o/d pipe of 2.5 kgf./sqcm

Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) DIA-225 mm

Supplying, carriage and fixing UPVC Cowl size 225 mm Ф,

Supplying, carriage and fixing UPVC Bend size 225 mm Ф, 1.5 mtr length of 90 degree

Supplying, carriage and fixing UPVC Bend size 225 mm Ф, 1.5 mtr length of 45 degree

Supplying, carriage and fixing UPVC Bend size 225 mm Ф, 1.5 mtr length of 30 degree

Supplying, carriage & fixing equal UPVC Tee , 225x225x225mm

Cost of One No. Riser (UPVC pipe of 2.5 kgf/sqcm pressure and fitting ) of 225mm dia as per approved drawing & Design unit each

Providing and Making outlet Khura (UPVC pipe of 2.5 kgf/sqcm pressure and fitting ) at riser point complete in all respect as per approved design/drawing 225 mm dia.

Providing and fixing Pressure air release pipe 225mm dia.(UPVC pipe of 2.5 kgf/sqcm pressure and fitting ) as per approved design/drawing

Suppling & carriage of RCC spun pipe with rubber ring asper I.S:458-2003( pipe for road crossing)Class N.P.2.150mm dia

Supplying, carriage and fixing UPVC coupler 225mm i/d ,

Supplying, carriage and fixing UPVC end cap 225mm I/D,

Const. of pipe stand with RCC 600 mm dia pipe complete in all respect as per drawing/design and PWD specification .

Making Grade Breaker as per design/drawing (UPVC pipe of 2.5 kgf/sqcm pressure and fitting )and PWD specification( including the cost of Material, carriage & recarriage at site of work).without the cost of PVC pipe ,fitting and solvent cement

Providing & fixing C.I/D.I flanged end , stem of SS (AIS 1410) & Bronze ( gunmetal) working parts sluice valves ISI maked 14846-2000 , including jointing. Testing & cost of Nut, bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge) .Class PN-1 as per ISI 150mm i/d Sluice Valves flanged and Const. of masonary sluice valve chamber excluding sluice valve cover as per Standard Design & Drawing of Public Health Dept.Size 0.9m x 0.9m

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

First class burnt brick laid in cement sand mortar 1:6 for bed and side wall [Item No 11.3(i)].

10mm thick cement plaster 1.4 on sides walls (-) Rs.1.25/- for scaffolding.

10mm thick cement plaster 1:4 on bed and top.

Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement (CSR Item No 10.13 (a) (i)

Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle

Cement concrete 1:4:8 with brick ballast 40mm gauge

Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank.(CSR 2020 Item No.18.4)

Providing & fixing M.S. foot rests made of 23x25 mm square bar including fixing in Haudis complete with cement concrete 1:2:4 (CSR 2020 Item No.29.35 )

Centreing & shuttering for Concerte faces

Providing and fixing of Steel Shutter Gates Assembly in Main Pipeline complete in all respects.

Dismantling of Brick work in Cement, CSR 2020 - item no- 8.5 (b)

Miscellaneous item 1

Miscellaneous item 2

Miscellaneous item 3

ATUL ENTERPRISES (BID ID -690184)