SPL REPAIR TO BLDG No P 24 OFFRS MESS AT 1 WEC UNDER GE CENTRAL DELHI CANTT 10

Amount

M & L for dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for rectified Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .

M&L for rectified Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including provn of 10mm thick rendering of backing coat in CM 1:4 etc complete all as specified .

M&L for joint less Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .

Material and labour for coloured glazed ceramic tiles 450x350 mm 7 mm thick in vertical surface set and jointed in neat cement slurry and pointing in coloured cement laid/fixed over 10 mm thick cement mortar (1:4) back coat complete all as specified and directed.

Material and labour for machine cut Kota stone slab 16 to 18 mm thick as in flooring of minimum size of 580 mm on either side, laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, laid over and including cement screed bed 15mm thick in cement mortar 1:6, including rubbing and mirror polishing including pattern work with 150mm wide white marble strips complete all as specified and directed

M & L for Kota stone slab 16-18mm thick in riser & steps in single piece, skirting, dado and pillar laid over cement screed/redering 15mm thick (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr in Charge

M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement to match the shade of granite stone including grinding, nosing and polishing including 15 mm thick screed bed in CM 1:6 complete all as specified

M & L Granite (of any type & colour) tiles 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing in vertical surface including 15 mm thick rendering on any face of brick/ concrete surfaces CM 1:4 complete all as specified

M & L for Taking down cement plaster in brick walls,including raking out joints,hacking for key,scrubbing down with water etc including scaffolding if required complete all as specified.

M&L for rendering 12 mm thick in CM (1:6) on any faces of concrete or brick surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on any faces of concrete or brick surfaces finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1 : 3 on brick or concrete surfaces (in ceiling) etc finished even and smooth without using extra cement all as specified.

M & L for applying two coat of cement base paint on newly plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.

M & L for two coat of distemper oil emulsion over a coat of primer and 2 mm thick JK Birla wall care putty including preparation of new plastered surface of wall complete all as specified and directed.

M & L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces for matching with repaired surfaces complete all as specified and directed.

M & L for complete removal of existing old surfaces treatment of wall by mechanical means, washing down with water and applying two coats of cement base paints, complete all as specified and directed by Engr-In-Charge.

M & L for preparation of old plastered surfaces and applying two coat of oil bound distemper including 2 mm thick JK Birla wall care putty on wall including removal of existing old surfaces complete all as specified and directed.

Cutting chases,on brick walls pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each all as spd.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame n exc 1.5 sqm each all as spd.

S&F steel window box type made out of 16 gauge steel section for frames & shutters as per drawing No TD-A sheet 01/03 to 03/03 with openable both glass and gauge shutters including box hinges 75mm long 12mm dia, 100mm long handle and tower bolt 150mm long, MS hooks & eye 150mm long all as applicable complete all as specified and directed. (Glass & wire mesh shall be paid separately)

S & F powder coated anodised aluminium window and ventilator shutters with frame, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane all as spd.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as spd.

S & F as in repairs pressed steel frames (125x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer complete, as specified, supplied and fixed complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSRpart-i section 8 clause 8.24(a) including one shop coat of pink primer complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters/ any number member of panels) with panels of timber flat on both sides / feather edges) of veenered particle board medium density wood particle board with commercial face veeners complete all as specified and directed.

Supply and fix Aluminium alloy, anodised,sliding door bolt 300 mm with hasp,staple (bolt type) and fixingclips of sheet, cast or extrudedsections and fixing bolts andsliding bolts of extrudedsections or cast-aluminium alloy and fixed

S & F 150 mm long allumium anodised barrel tower bolts of extruded section complete all as specified .

S & F 150mm Extruded aluminium alloy handles, fabricated type,anodised handles complete all as specified.

S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 mm made out of 5mm thick plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC sheet Polyurethane painted on the front face and 2 mm plain color PVC sheet on back face as per specification and drawing complete all as specified.

S & F 75mm long medium alluminium barrel tower bolts of extruded section complete all as specified

S & F 100 mm long medium weight alluminium barrel tower bolts of extruded section complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces not otherwise described over 10 cm width or girth incl preparation complete all as spd.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S & F in repair rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) three layered hoisted and fixed in position all as specified in SSR Part-I, 1000 ltrs capacity.including float valve of PTMT 20mm size including disconnecting of existing water tank complete all as specified.

Taking up or down 15 mm dia steel tubing and connection incl cleaning or removal to store all as specified

Taking up or down 20mm dia steel tubing and connection incl cleaning or removal to store all as specified

M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified .

M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified.

Refixing old galvanized steel tubing, medium grade includig all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors, bore of tube 15 mm complete all as specified and directed.

All as per item No 44 above but 20mm bore pipe.

Material and labour for cement concrete 25 mm thick(average) ,1:2:4 type BO (using 12.5 mm graded stone aggregate) as in roof padding for applying roof treatment laid in required gradient and camber and finished the surface even and fair including demolition/dismantling of existing roof treatment and removing mud phuska complete all as specified and directed.

M & L for water proof treatment to RCC roof slab by applying first coat of brush bond RFX and again apply second coat of brush RFX after drying of first coat (average 1 mm thickness) and providing 25 mm thick PCC 1:2:4 mix (using 10 mm nominal size coarse stone aggregates) incorporating CONPLAST WL (water proofing compound) in the proportion as directed by the manufacturercement as top surface. Complete roof shall be tested by ponding of water for 72 hrs. Note :- Brush bond RFX liquid powder and CONPLAST WL shall be of FOSROC or equivalent in oyher approved manfacturer.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, hozontal or sloping and similar work exc 5cm but n exc 10cm etc.for fair finished surface complete all as specified.

S&F in repair vitreous china squatting pan (Orissa pattern) long pan (including provision of lime concrete bedding) of size 580x440mm white with intergral footrest including providing 100mm bore CI 'P' or 'S' trap complete all as specified (excluding flushing cistern and flush).

S&F in repairs PVC Low level flushing cistern 10 ltr capacity incl internal fittings,sypons,handle,bend etc incl 2 Nos CI brackets complete all as specified.

M & L in repairs PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified.

S & F in repairs for fancy type wash hand basin vitreous china white glazed flat back, size 550 x 400 mm, including brackets and cutting for and pinning in ends of brackets including provision of bottle trap and coupling etc complete all as specified and directed.

S&F PVC waste pipe of standard pattern, 32mm bore socketed end 600mm long for wash basin complete all as specified.

S&F 32 mm waste fittings of brass chromium plated for wash hand basin with long screwed shank and flynut flange complete all as specified.

M&L in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall all as specified and directed Make-commander,prayag,Atul.

S & F in repairs towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc complete all as specified and directed.

S & F in repair 125mm dia MS chromium plated grating with holes fixed in cement mortar (1:3) complete all as specified.

S & F Butt hinges, medium weight, cold rolled mild steel,100mm size complete all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M & L for mild steed framed work as in doors, sun shade or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W-Gde-250 quality A complete all as specified and directed.

S&F Stain less steel railing of grade SS-304, 900 mm high from finished top of stairs/ roof using modular balustrade system with 50mm dia hand rail and 03 Nos mid rail 19mm dia with 12mm thick toughened glass alongwith all standard acessories in 'Ozon' Make concept complete all as per manufaturer instruction and as directed. Make-Bakyster Railing as per Cat No- OZBF-CM-44-3R and hand rails Cat part No-OZRF-TB-02-50 and mid rail, Cat part No-OZRF-TB-02-19 of 'Ozone' or equivalent of Fabronixd/Godrej. Make of Glass: Saint Govin/Modi/Godrej. Note-Stainless steel railing shall be installed by represenntative of manufacturer.

S&F 12mm thick toughened glass partition 750x450 fixed with SS grade fixtures for sepration of urinal pot including necessary fixing arrangement complete all as specified and directed size and design approved by GE

S&F in repairs decorative type wooden finish mild steel powder coated drapery rod,25 mm dia incl side caps and wooden brackets,wooden rings @12 cm distance centre to centre complete all as specified. Make : Vista FE - 22 series or Equivalent

S&F in repairs fancy type CP brass shower rose with flat panel 125 mm size suitable for 15mm bore pipe complete all as specified and directed .

S & F in repair fancy type brass CP angle valve 15 mm dia complete all as specified

S & F in repair fancy type concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified and directed .

S&F in repair fancy type brass chromium plated bib tap for iron pipe of 15mm bore fancy type with flynut capstan head, screwed down high pressure complete all as specified.

Supply and fix mild steel helical door ordinary rat tail rod pattern spring of size 150 mm complete all as specified and directed.

M & L for cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in roof kerbs, or mud stops, rounded or chamfered on edges, coping complete all as specified

M&L for cutting holes in brick wall built in cement mortar ex c half brick but not exc full brick wall and making good in cement concrete 1:2:4 type B-1 complete all as specified.

M & L for 25 mm sand filling under floors or in foundation including watering and consolidation

Material and labour for machine pressed precast PU coated concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 50mm thickness, M-35 grade with grey cement and no pigment laid over 50mm thick compacted sand cushion complete all as specified and directed. (Note : - Sand cushion will be measured and paid separately).

M & L for hardcore of gauge n exc.63 mm(using broken stone or boulders) deposited, spread and levelled in layers n ece. 15 cm thick, watered and rammed to a true surface all as specified

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M & L for brickwork with subclass- ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6

Supply and fix in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S & F 32 mm dia brass chromium plated trap ‘P’ or ‘S’ pattern for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap and fixed

M & L for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

M and L Cast iron Nahani trap 50 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S & F in repair 75mm dia cast iron soil waste and vent pipe (ISI marked) sand cast, in any length with or without ears with cement joint complete fixed in floors or walls and in any other places complete all as specified.

S & F 100 mm bore cast iron soil waste and vent pipe (ISI marked) sand cast in any length with or without ears, with cement joint laid in trenches or in floors complete all as specified and directed

S & F bends 100 mm size diminishing pieces or tapers (larger bore measured) all as specified

S & F bends 75 mm size diminishing pieces or tapers (larger bore measured) all as specified

S & F branch pieces 100 mm size, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches all as specified

S & F branch pieces 75 mm size, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches all as specified

S & F 100 mm size sockets (double collars)

S & F in repairs CI nahani traps (ISI marked) 75 mm dia outlet with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair cast iron floor trap including jointing to waste pipe in run lead, dia of outlet 75mm, complete all as specified.

All as per srl item No. 90 above but of 100mm dia complete all as specified.

Demolition of cement concrete (unreinforced) as in ground floors and paving exc 15 cm thickness (below ground or above gorund level ) incuding removal of rubbish out side complex (Defence land complete all as specified and directed.

Taking down cement plaster of any description and material and labour for rendering 12mm thick in CM 1:4 laid to achieve slope with two coat of tape create mixed (1:2) with cement slurry @ 500 gm per sqm as per manufacturer instruction in sunken portion of toilets finished even and smooth without extra cement and applying a coat of hot blown bitumen 85/25 grade at the rate of 1.20 kg per sqm and applying one coat of hot blown bitumen 85/25 grade at the rate of 2.6 Kg per sqm and one layer of 0.5 mm thick fibre tissue and final layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out complete all as specified and directed. Note : For Gurantee ref PS.

M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in cup board shutter, loft shutters incl 6 mm thick teak wood lipping and necessary rebating for shutters wherever required including polishing to lipping/rebating complete all as specified.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm, complete all as specified.

Supply and fix MS 40mm dia, cup board knobs, glossy finish, fixed with nuts, screw and washer complete all as specified and as directed.

Supply and fix door magnet suitable for cupboard shutters complete all as specified and as directed.

S & F 100mm size hasp and staple, safety type, aluminium anodised with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F ball catches with 8mm dia steel ball and brass body and striking plate including rating in repair complete all as specified and as directed.

Dismantling loose concrete cover of RCC columns,beams,slabs chajjas and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry including derusting of steel reinforcement to providing fabric mild steel wire mesh 75X75X3 mm dia as reinforcement to concrete surfaces, applying adhesive admixture over steel mesh and providing minimium 40 mm thick (average thickness) guiniting mix using 1 part of ordinary portland cement 53 grade and 2 part of ghaggar sand mixed with the pressure of 2 to 2.5 kg per sqm by guinting machine including necessary plaster in CM 1:4, 10mm thick to match existing surface and surfaces finised even and fair.all as specificed

S&F in repair 15 mm ball valve PTMT high pressure with polythene float and flynut complete screwed for iron pipe complete all as specified and as directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.

S & F in repairs fancy type 15 mm dia pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

M & L for aluminium alloy powder coated 60 micron door & shutter including rectangular frame of sections 101.6 x 44.45 x 2.10 mm and shutter 2.10 mm thick section (Top rail 47.62 mm x 44.45 mm, bottom 114.3mm x 44.45mm, vertical 85mm x 44.45 mm, middle 83.50 mm x 44.45 mm, glazing clip weighting not less than 0.097 kg / metre ) including snap type beads ,handles, tower bolts,rubber gaskets,100 mm brass vertical mortice lock 6 lever etc including provision of partly glazed with 5.50mm thick tinted glass and partly 12 mm thick both side prelaminated particle board as required including taking down existing door as required by user complete all as specified and directed.

M & L aluminium alloy powder coated (60 micron) sliding windows Series - B (18mm) 3 track, 1.5mm thick sections of 'Jindal' Make or equivelat in other approved makes with half opening gauge shutter on one track and two glazed shutter half opening each on two tracks including handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel wiremesh including taking down existing window complete all as specified & directed.

M/L for aluminium windows powder coated 60 micron of scetions not less than 0.55 Kg/Sqm as in fixed windows including glazing clip and rubber beads complete all as specified and directed.

M/L for 5.50 mm thick tinted glass as in windows all as specified and directed.

S & F for anodised aluminium ornamented grills (Pattern Approved by GE) complete all as specified.

S&F 12mm thick toughned glass door in single/double leaf including stainless steel handles, fixtuters arrangements,floor spring Make Ozone' model No: Cam Action Floor Spring with Closing ForceEN4 Double Cylinder (Heavy Duty), colour froasted glass film and any size of logo if required fixed to ground/existing floor surface in cement concrete 1:2:4 B-1 type incl locking arrangement with 02 sets of dulicate keys incl all required accessories complete all as specified.

Taking downShutters of any description but exc 1 sq. m and n exc 2 sq. m each

M&L for 35mm Flush shutters, with particle board core solid core construction, with block board core and plywood face panels, commercial type on both sides with one face is covered with deco rative face veneer with lipping/frame to match

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S&F in door closer (alu die cast) hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified.

S&F in repair automatic fancy type Wash down single seat vitreous china EWC (Model No: Hindware Elba Catalogue No: 92037 or equivelent in other approved makes) with in-built flushing cistern including spray jet, health faucet, seat cover, 2 in 1 angle / stop valve both for EWC and Health faucet with provision of cement concrete bedding, fixed with 'P' or 'S' trap complete all as specified

Material and labour for complete removal of existing treatment old decorated surface of walls and applying cement based wall care putty (Birla care/JK wall putty)2 mm thick(average) and applying two coats of plastic emulsion (any colour) paint to achieve uniform and smooth surface by roller brush over a coat of primer of same manufacturer complete all as per manufactures instruction and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately). Note : Pannel size should not be more than 0.36 Sqm

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for Dark Shade, double charged vitrified Ceramic tiles 10 mm thick (square/ rectangular) as per Make:Somany, Magnus series or equivalent in other similar makes, polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .

M&L for Dark Shade, double charged vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, on vertical surfaces as in skirting, dado & steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick rendering of in backing coat in CM 1:4 etc complete all as specified . Note: Make of tile shall be same asthat for flooring tiles.

Supply and fix cast iron cowl for 75 mm bore of pipe with cement joint, complete all as specified

Supply and fix cast iron cowl for 100 mm bore of pipe with cement joint, complete all as specified

Material and labour for 4mm thick E-board ceiling of approved make as approved by GE, fixed with and including galvanized iron powder coated inverted ‘tees’ or ‘L’ sections (concealed GI frame work) suspended from ceiling with provision of galvanized iron wire 4mm dia and self tapping screws including butterfly clips, hold down clips for fixing the board to frame, including demolition of old ceiling board complete all as per manufacturer’s instructions a) Size of Main Tee- 38x38x1.5mm b) Size of Cross Tee- 29x24.7x0.8mm c) Size of wall angle- 25x25x1.5mm d) Size of grid-600mm x600mm Make : Lafarge, Armstrong, Ramco Industries Ltd.

Dismantling of FRP/ asbestos sheet (corrugated or semi corrugated) fixed in roof including ridges all as specified

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F in repairs vitreous China fancy type urinal with automatic sensor system in any size and shape and in any colour and discharge pipe complete including providing and fixing plugs,urinal and including , pointing around urinal back in cement complete all as apecified and directed. Make : Urinal Cat No S4010101(Urinal with intigrated EFS)

M&L for dismantling Bricks (laid flat or on edge) or brick tiles laid bedded and pointed in any mortar in floors, channels, kerbs, aprons, etc. (each layer)

Demolition of mud in roof any thickness inlcl plastering and leeping and disposal up to 50 meters all as specified

M&L for decorative type POP based false ceiling including attractive design, cornice and other necessary articles as approved by GE on recommendation of user and also complete all as specified and directed by Eng-in-Charge.

M&L for demolition to Concrete(reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Eng-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4)

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls.

S&F 110mm dia PVC (SWR) bends any radius

S&F 75mm dia PVC (SWR) bends any radius

S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal

S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal

S&F 110mm dia PVC (SWR) couplers

S&F 75mm dia PVC (SWR) couplers

S&F 110mm dia PVC (SWR) reducers

S&F 110mm dia PVC (SWR) vent cowl

S&F 75mm dia PVC (SWR) vent cowl

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats

S and F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

S&Frazor blade barbed concertina coil having minimum weight of 15.2 kgs (+) or (-) 5 % per coil stretched to a length of 10 to 12 mts to achieve 600mm dia as in fencing to steel posts and to another coil/MS nibs all as shown on drawings including fixing with special galvanized fastners such as clips,c clips,U clips all as specified and directed by engineer in charge.(Note Linear length of coil after stretching and fixing shall be measured for purpose of payment.)

Supply and fix mild steel TMT bars, 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louversand jallies 40mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.

M&L providing CM 1:2:4 Type B-0 12.5 mm graded stone agg. In precast copings incl slightly rounded chemered angles and throating including necessary form work complete.

S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L band water screwed down for iron pipe and fixed complete all as spd .Make- Jaquar Cat No FLR-5281 or equivalent

S & F in repairs 15 mm dia Brass CP mixer long Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified, Make : Hindware F280020CP Sink Mixer with Swivel Spout (Wall Mounted) (Flora) with Chrome Finish

S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified. Make-Hindware F120009CP or equivalent

S&F in repairs vitreous chinaware coloured wash counter wash hand basin size 600mm x 400mm x 185 complete including , CP Waste coupplin ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.Make Jaquar cat No SLS-WST-6601

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe i as specified and as directed. . (Make - Cardin Cat Part No-HF-VD-2 or Equivalent other approved makes.

S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and as directed .Make - Cardin Cat Part No-GS-OP-18 or Equivalent other approved makes

S & F brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and directed. Make - Cardin Cat Part No-VS-101-RK or Equivalent other approved makes

S&F in repair two way angle stope cock make Jaquar AQUAR CORSA ARROW Angle cock 2 two way Valve body nose tap single lever chrome plated finish all as specified and directed by the Engr-n-charge .(Make Jaquar or equivalent other approved makes

M & L for applying two coat of texture paint on complete removal of existing old surfaces treatment of wall by scrubbing with wire brush washing down with water.

M&L for Chajjas,fibreglass Reinforced Plastic (F. R. P.)chajja 4mm thick of required colour ,size and design made by Resin Transfer Moulding (RTM)machine Technology, Resulting in Void free compact laminate in single piece ,having smooth gradual slope curvature for easy drainagee of water and duly reinforced by 2Nos vertical and 1No horizontally 50x2 mm thick MS flat in each wiondow chajja, with 12mm in built hole for gouting on the existing wall along with the 50mm x 4mm thick flanges duly inserted and seaaled in the wall complet in one single piece casted monolithically, including all necessary fitting . The FRP chajja should manufacture using unsaturated polyester resin as per IS: 6746 , duly reinforced with fibreglass chopped strand mat (CSM)as per IS:11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extrem of tempreture ,weather & sunlight. Make Duratuff/Lexan/VMT Plasete Ltd/Coxwell Domes Engr (P) Ltd.

S and F 10 mm toughened glass as in partition including dimond edging all sides,eatching ,lining and monograme area nexc .50 sqm each by sand blasting including CP " L" or " U " heavy duty clams suitable for fixing of glass ,min 4 nos pr sqm all spd and diected

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard rock complete all as specified and as directed by Engr-in-Charge

M & L for providing PCC 1:4:8 type D2 (40 mm graded stone aggregates) as in foundation, filling and mass concrete including demolition of earlier pcc complete all as specified and as directed by Engr-in-Charge

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for manhole covers cast in situ on site including neccesary form work and demolition

M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc complete all as required.

M&L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels all as specified

M and L for HDPE dash wall corrugated 163 mm internal diametre bore DWCPE pipes laid in trenches and jointed and connecting to septic tank as specified and directed by Engr-in-Charge.

M & L for concrete bed to drain pipes of 163 mm dia incl packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:4:8 type D2 cement concrete

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removing excavated material soil to a distance exc 500 m but n exc 1.50 km and depositing where directed completed all as specified

M & L Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L for RCC M-25 design mix (20mm graded stone aggregate) as in foundations footings, plinth beams etc all as specified & directed.

M&L for RCC M-25 design mix (20mm graded stone aggregate) as in columns, pillars etc all as specified & directed.

M&L for RCC M-25 design mix (20mm graded stone aggregate) as in beams, lintels etc all as specified & directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays between floors and beams finished rough surfaces of concrete complete all as specified.

M&L brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all asspecified and directed.

M&L brick work with sub class' B' bricks(except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all asspecified and directed.

M&L rendering in CM 1:4, 15 mm thick on other than fair surface of brick work or concrete surfaces in two layers first layer 10mm thick and second layer 5mm thick finishing even and fair including mixed with WPC @ 3% of cement weight and as per manufecturer instructions complete all asspecified and directed..

Removing excavated soil n.exc 50m and depositing where directed to a level n.exc 1.5m above the starting point in soil complete all as specified and directed.

M&L preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all asspecified and directed.

M&L for Cement concrete in walls lintels up to 1.5m clear span, cills coping etc in 1:2:4 type B1 using 20mm graded stone aggregate complete all asspecified and directed.

M & L for providing PCC 1:3:6 type C2 (40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified

Excavation over areas, n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

M&L for cutting shrubs wild growth/trees n.exc 30cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick work and making good the disturbed surface with PCC 1:2:4 type B0/ brick bats and disposing off the rubbish from the site out side MOD land complete all as specified.

M & L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets light fitting etc. and making good disturbed surfaces of walls, floors ,etc.

M & L Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall and on surface in pvc conduit for ceiling/roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty conductor, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:-

(a) One light/Fan point controlled by one switch

(b ) One socket outlet point 5 Amps on independendent board

(c ) One socket outlet point 5 Amps controlled by one switch on same board along with other switches.

All as per item No 192 above but with copper conductor cable FLRS 2.50 sqmm for one 3 pin socket outlet,15 Amps concealed and including provision of 2.50 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

Supply and fixing switch modular type single pole one way 6 Amps complete all specified and as directed

Supply and fixing modular socket 5 pin multi purpose 6 Amps flush type complete all specified and as directed .

Supply and fixing modular socket multi purpose 2-in-1, 6 pin 6/16 Amps 2 module complete all specified and as directed .

Supply and fixing modular switch 16 Amps one module single pole one way complete all specified and as directed .

S&F ceiling rose surface PVC 65x50 mm type with three terminals complete all as specified.

M&L for submain wiring concealed on wall and surface on column with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including PVC conduit 25 mm dia, medium grade for submain wiring and one run of FRLS grade,unsheathed copper conuctor cable of 10 Sqmm size as earthwire connected to earth dolly complete all as specified and directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyster or with epoxy powder coating and IP 66 & IK 09 protection, surface mounting, SPN 8 way,with 100 Amp rated copper bus bar and making all necessary connections as specified and directed

M&L for MCB, SPN 10 KA, 6 to 32 Amps, C Curve, Single Pole with neutral all as specified and directed

M&L for MCB, SP 10 KA, 10 Amps,C Curve, Single Pole with neutral all as specified and directed

M&L for MCB, SP 10 KA, 16 Amps, Single Pole with neutral all as specified and directed

supply and fix recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply incluiding all fixing accessories complete all as specified and directed. make -Jaquar cat part-LSVR01S036XC OR equivelent of bajaj/Philips

M&L for submain wiring concealed on wall and surface on column with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit 25 mm dia, medium grade for submain wiring and one run of FRLS grade,unsheathed copper conuctor cable of 6 Sqmm size as earthwire connected to earth dolly complete all as specified and directed.

Supply and fix and connecting up with light point Wall mounted fan of size 400 mm sweep,1310 RPM, metal blades with full - cord mechanism for speed control complete with necessaary fixing arrangements all as specified and as directed.including writing MES No 2cm height with synthetic enamel black paint complete all as specified.

S & F exhaust fan AC single phase, DB of size 450 mm sweep 1250 RPM plastic body with louvre Make: Havells Model No: FHVVEMTDBS12 or equivelennt in makes listed in PS all as directed by Engr-in-Charge.

Taking down carefully ceiling fan 1200/1400mm from the site, shifting it to the store yard without any damage and refixing the same after cleaning, greasing ,connecting it to the existing point with suitable 3 core flexible copper conductor (23/0.0076) cable, complete all as directed by Engr-in-Charge.

Taking down carefully geyser any make, type from the site, shifting it to the store yard without any damage and refixing the same on wall with 04 nos of hole fastener after cleaning and connecting it to the existing point with suitable size 3 core flexible copper conductor (40/0.0076) cable, complete all as directed by Engr-in-Charge.

Taking down carefully Tube light fitting of any make and type,capacity from the site, shifting it to the store yard without any damage and refixing the same after cleaning and connecting it to the existing point with suitable size 2 core flexible copper conductor (23/0.0076) cable, complete all as directed by Engr-in-Charge.

Taking down carefully wall mounting light fitting of any make and type,capacity from the site, shifting it to the store yard without any damage and refixing the same after cleaning and connecting it to the existing point with suitable 2 core flexible copper conductor (23/0.0076) cable, complete all as directed by Engr-in-Charge.

Taking down carefully recess mounting rectangular/squqre panel light fitting of any make, type and capacity from the site, shifting it to the store yard without any damage and refixing the same by cutting the false ceiling of required size as per taken out light, after cleaning and connecting it to the existing point with suitable size 2 core flexible copper conductor (23/0.0076) cable and all required accessories, complete all as directed by Engr-in-Charge.

Taking down carefully building security light of any make, type from the site, shifting it to the store yard without any damage and refixing the same on wall with 04 nos of hole fastener and MS clamp after cleaning and connecting it to the existing point with suitable size 3 core flexible copper conductor (23/0.0076) cable, complete all as directed by Engr-in-Charge.

Taking down carefully bed side light fitting of any make, type and capacity from the site, shifting it to the store yard without any damage and refixing the same after cleaning and connecting it to the existing point with suitable size 2 core flexible copper conductor (23/0.0076) cable and all required accessories, complete all as directed by Engr-in-Charge.

S&F LED Post top lanterns GLOBE E4625 Watt made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP 65 protection incl necessary PCC work for grouting of base pipe and making electrical connections complete all as directed.

Supply and fix Ruby 25 Watt Clear IP 65 new generation post top ,energy saving, envirnment friendly, long life aesthethically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source complete all as specified and directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyster or with epoxy powder coating and IP 66 & IK 09 protection, surface mounting, SPN 4 way, and making all necessary connections as specified and directed

S&F GI tubing 32 mm dia light grade fixed on wall in PCC by cutting of required length as specified by engr-in-charge complete all as specified and directed.

Material & labour, for PCC 1:3:6 type C-2 using 40 MM graded stone aggregate for foundation of Flood lights complete all as directed.

S&F LED garden light made in cast aluminium spigot housing with CONE- IP 65 protection with necessary PCC work for grouting of base pipe and making electrical connections complete all as directed by Engr-in-Charge.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core ISI marked in service connections, incluidng cost of suspension by insulating hanger (not more than 1 mtr apart) including cost of all connections from main panel to main DB with thimbles of suitable size, including taking down of old unserviceble cable of any size complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, laying of pipes etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M & L for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.

M & L for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as directed.

n s kumar and sons

Ashish Sehgal and Co.

The new hut furnitures

tarun construction co

M/S Sunil Steel Works

Shivom Projects Private limited