Left Over Civil Works of 33/11kV Humhama Substation.

Amount

cleaning jungle incl uprooting rank vegetation, grass, brushwood trees and saplings of grith upto 30cm measured at a height if 1mtr above ground level and removel of rabish upto distance of 50mtrs out site the periphery of the area.

Supply and filling of earth including breaking clods raiminmg, watering, levelling and including all carriages complete.

Supply, laying and spreading lime as anti growing grass agent vegitation etc including all carriages complete.

Prepration of Sub-Grade by excavating earth to an avarage 22.5 cm depth dressing to camber and consolidation with P&R Incl. making good the andalations etc and disposal of sumples earth u[pto 50m (including all carriages complete.)

S/L and consolidation of GSB Grade I incl levelling, raiming and watering incl. All Carriage from Source to Site.

Providing and laying in position cement concrete of specified grade excl.the c/o centring and shuttering. All work upto plinth level in 1:4:8 (1 cement:4 Coarse sand: 8 graded stone agg) 40mm nominal size crushed. (incl. All Carriages Complete).

Providing and laying in position cement concrete of specified grade excl.the c/o centring and shuttering. All work upto plinth level in 1:2:4 (1 cement:2 Coarse sand: 4 graded stone agg) 20mm nominal size crushed. (incl. All Carriages Complete).

P/L of concrete Cement flooring 1:2:4 50mm Thick. (1 cement:2 Coarse sand: 4 graded stone agg) 40mm nominal size crushed. (incl. All Carriages Complete).

Providing and laying in position reinforced cement concrete of specified grade excl.the c/o centring and shuttering and reinforcement. All work upto plinth level in 1:2:4 (1 cement:2 Coarse sand: 4 graded stone agg) 40mm nominal size crushed. (incl. All Carriages Complete).

Centrering and shuttering including strutting, proping etc and removal of form work in foundations footins and bases of columns.

Reinforcement for RCC work including straightening,cutting, bending placing in position and binding all complete (cold twisted bars).

Providing and fixing of PVC pipes with MS grating,(100mm dia), CP cowel as weep holes for earthing

Supply Stacking and levelling of 40mm nominal stone aggregate including all carriages.

Earth work in excavation by manual means in trenches for foundations,drains,pipes cables etc (not exceeding 1.5m in width) and for shaft walls, cesspits and the like not exceeding 10 sqm on plan, depth upto 1m incl.disposal of excavated earth upto 1 mtr from cutting edge,disposed earth is to be levelled and neatly dressed in all kinds of soils.

Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 75 in foundation and plinth in cement mortor 1:4 (1 cement 4 fine sand) (incl. All Carriages Complete).

Extra for brick work in super structure

Demolishing Brick work in cement mortar by manual means including stacking of servicible/ unservicible material as per the directions of Engineer Incharge.

Providing wood work in frames of doors, windows , clear storey windows and other frames, wrought framed and fixed in position with hold fasts.( first class kail wood)

Providing 14*5mm flat iron hold fast 40cmm long incl. fixing to frame with concrete blockin 1:3:6.

Providing fixing of panelled or panelled and glazed shutters for doors , windows and clere story windows fixed with M.S butt hinges of required size with necessary screws, excl. panelling which will be paid seperately in first class kail wood.

Providind and fixing of hardware fittings for doors, windows like T-bolt, handle,L-drop etc

P/f wire gauze shutters using galvinised M.S wire gauze of average width for aperture 1.4mm in both directions wth wire of dia 0.63mm for doors, windows and clere storey windows with ISI marked M.S pressed butt hinges, bright finished of required size with necessary screws as per directions of engineer I/C (first class kail wood)

P/F of sheet glass of ordinary glass panes 4 mm thick in doors, windows and clerestory window all complete.

Providing fixing of Kail Wood Panelling for Doors 25mm Thick

20mm thick cement plaster of 1:6 mix (I cement 6 coarse sand)

Providing hoisting and fixing trusses/purlins/rafters/posts/post platesof like components including cost of screws etc complete.(first class budloo/Fir wood)

Providing,fixing colored sheet roofing (high rib) fixed with GI coach screws and limpet washers filled with while led excl. cost of purlins, profiters and trussess and incl. cutting if size and shape whereever required(0.50mm thick). .

P/F ridges or hips of width 30 cms overall width plain cloured sheests fixed with coach screws and GI limpet washers complete (0.50mm thick)

P/F of T&G plained budloo wood ceilings under soffits 15mm thick

P/F of Eaves boarding of budloo wood size 300 * 35mm.

Providing and applying white cement based wall putty of average thickness 2mm of approved brand and manufacture, over the plastered wall surfaces to prepare the surface even and smooth complete.

Providing and Fixing aluminium work for doors, windows, ventilators and partition with extruded built up sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junction at top, bottom and sideswith required PVC/neoprene felt etc. Aluminium sections should be smooth rust free, straight,mitred and jointed mechanically wherever required including cleat angles, almunium snap beading for Glazing/Panelling, C.P brass / Stainless steel screws, all complete, including cost of glazing with 5mm glass pane and panelling. Powder coated aluminum (minimum thickness of powder coated 50 microns) Fixed Portion including cost of door whereever required.

Kota stone slab flooring in floors and treds/steps as well over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortor 1:4 ( 1 cement :4 coarse sand) 25mm thick.

Extra for nosing of steps and treads.

P/L vitrified tiles in floors with different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confiming to IS; 15622, of approved brand and manufacture in all coloures and shades laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS; 15477, in average 6mm thickness, (size of tile 600*600mm )

P/F gang saw cut, mirror polished, premoulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias, wall lining for dado works and similar locations, of required size, approved shade colour and texture laid over 20mm thick base cement morter 1:4 joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, quering, moulding and polishing to edges to give high glass finish etc. complete at all levels.

Providing/fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with Flat Iron Diagonals 20x5mm size with Top & bottum Rail of T-Iron 40x40x6mm with 40mm dia steel pulleys complete with Bolts & Nuts , locking arrangements , stoppers, Handles including applying a Priming coat of approved steel Primer including cost of hardware fittings of Doors and WIndows.

P/F of C.P brass steel railings upto 750mm. Height incl. C.P brass railing of 50mm dia.

Providing fixing of C.P brass king posts 100mm dia with C.P brass cowel.

Providing/fixing 1st class ceramic glazed tiles confirming to IS : 13753 of min.thickness of 5mm of approved make like NITCO,ORIENT,SOMANY,KAJARIA or equivlent make in all colours , shades except BEGUNDY,BOTTLE GREEN,BLACK or any size as approved by Sub Divisional Engineer Incharge, in skirting , risers of steps and dado over 12mm thick bed of cement mortor 1:3 (1 cement : 3 coarse sand) and jointing with gray cement slurry @3.30 kg / sqm. incl.pointing in white cement mixed with pigment of matching shade complete.

Providing/laying,fixing ceramic glazed floor tiles 300x300mm (thicknes to be spacified by the Manufacturer 1st quality confirming to IS:13755 of min.thickness of 5mm of approved make like NITCO,ORIENT,SOMANY,KAJARIA or equivlent make in all colours , shades such as White, Ivory, Grey fume red, Brown laid on 20mm thick bed of cement mortor 1:4 (1 cement :4 coarse sand) incl.painting the joints with white cement and matching pigment etc complete)

structural steel work in single section,fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/framed work, incl. cutting, hoisting fixing in postiion and applying a priming coat of approved steel primer using structural steel as required (in stringers, treads, landings etc.) of stair cases, incl. use of chequeredwhereever requirede all complete.

Steel work welded in built up sections/framed work, incl. cutting, hoisting fixing in postiion and applying a priming coat of approved steel primer using structural steel as required (in stringers,rames, guard bars, ladder, railings, brackets, gates and similar works .) of stair cases, incl. use of chequeredwhereever requirede all complete.f

Providing and fixing of barbed angle wire fencing.

P/F of chainlink fencing 50mm * 50mm size of (8SWG) Incl. cost of Nuts, bolts and washers or by welding all carriage complete.

P/L of Cement concrete interlock tiles as per the direction of the engineer incharge thickness 75 to 90 mm. jointing the tiles properly incl all carriage complete.

Applying priming coat on wood and wood based surfaces with ready mixed pink or grey promer of approved brand and manufacturer.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture on new work incl. a base coat of fevicol solution and wood filler.

Applying one coat of water thinable cement primer of approved brand and manufacture (water thinable cement primer).

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade (Two or more coats).

Applying priming coat ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel works.

Painting steel works with synthetic enamel paint of approved brand and manufacture.

Finishing walls with textured exterior paint of required shade on new work ( 2 or more coats applied @3.28 liters/ 10Sqm over and)

Finishing walls with water proofing cement paint/snowsem of required shade on new work(2 0r more coats applied at the rate of 3.84kg per 10sm).

Painting (2 or more coats) on rain/water/soil waste pipes.

Providing/fixing of G.I.pipes complete with G.I.fittings and clamps including cutting and making good the wall etc , internal work exposed on wall 15mm dia nominal bore light grade.

Providing/fixing of G.I.pipes complete with G.I.fittings and clamps including cutting and making good the wall etc , internal work exposed on wall 20mm dia nominal bore light grade.

Providing and fixing G.I.Pipes complete with G.I.fittings incl.trenching and refilling etc (external work) 15mm dia nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked indicating the BIS Licence No.with cover and suitale locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings and the base support for tank (SINTEX, ELECTROPLAST,STAR,LOTUS or equivlent having valid ISI licence.

Providing and fixing salem stainless steel A ISI 304 18x8 kitchen sink of approved make as per IS: 13983 with C.I.brackets and stainless steel plug 40cm incl.painting of fittings and brackets, cutting and making good the walls wherever required size (610x510x200mm bowel depth).

Providing and fixing water closet squatting pain (Indian type WC pan with 100mm dia sand cast iron P or S trap, 10 litre low level P.V.C. flushing cistern including flush pipe of approved make manually controlled device (Handle level) confirming to IS:7231 with all fittings and fixtures complete incl.cutting and making good the walls and floors where ever required (Orrisa pattern white vitreous china wc.pan of size 580x440mm with integral type foot rests.)

Providing and fixing water closet squatting pain (European Type WC Pan with saet and lid,10 ltr low level white PVC Flushing Cistern, including flush pipe with manually controlled device conforming to IS 7231, with all fittings and fixtures complete,including cutting and making good the wall and floors wherever required WC Pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin white viterous china with C.I./M.S.brackets 15mm C.P.brass piller taps, 32mm C.P.brass waste of standard quality including painting of fittings and brackets, cutting and making good the walls where ever required. White vitreous china wash basin size 550x400mm with a pair of 15mm C.P.brass pillar tap.

Providing and fixing white vitreous china pedestral for wash basin completely recessed at the back of the reception of pipes and fittings.

Providing and fixing water heater/gyser of standard make (like Racold, Morphy Richards , Venus, Havells, Polar, white line etc )including cost of Nuts,bolts and making good the wall. 35 liter capacity

Providing and fixing water heater/gyser of standard make (like Racold, Morphy Richards , Venus, Havells, Polar, white line etc )including cost of Nuts,bolts and making good the wall. 25 liter capacity

Providing and fixing of C.P.brass angle value for basin mixer and gyser points of approved make confirming to IS : 8931 15mm nominal bore.

Providing and fixing of C.P Brass connections.

Providing and fixing of C.P.brass wall mixer of approved make 15mm dia

Providing and fixing of C.P.brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810 gm 15mm nominal bore.

Providing and fixing of C.P.brass health faucet shower of approved quality confirming to IS standards and 15mm nominal bore.

P/f of C.P brass over head shower

Providing and fixing of soap dish container C.P.Brass 125mm x 100mm size of approved make

Providing and fixing of CP Towel rail 600 mm Long

Providing and fixing of 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard boared ground fixed to wooden cleats with C.P.brass screw and washers complete.

Providing and fixing of 600x120x5mm glass shelf with edges round of supported on anodised aluminum angle frame with C.P.brass brackets and guard rail complete fixed with 40mm long screws,rawl plugs etc complete.

Providing and fixing of C.P brass Tissue Roll Holder

Providing and fixing of PVC Floor Trap 100mm dia

Providing and fixing of C.P.gratings 100mm dia with C.P.cowels complete set

Providing and fixing of C.P.brass Mixer for Kitchen Sink of approved make confirming to IS : 8931 15mm nominal bore.

Providing and fixing of wall mounted liquid soap dispencer of approved make.

Providing and fixing of soil waste and ventilating pipes PVC type of approved make 100 mm dia

Providing and fixing of soil waste and ventilating pipes PVC type of approved make 75 mm dia

Providing and fixing of soil waste and ventilating pipes PVC type of approved make 50 mm dia

Construction of inspection chambers internal size 450mmx450mmx350mm depth made of bricks incl.plastering and P.V.C.main hole lid and cover complete job.

Construction of inspection chambers internal size 600mmx600mmx300mm depth made of bricks incl.plastering and P.V.C.main hole lid and cover complete job.

Providing and fixing of PVC soil waste and wentilating fittings Viz, Door T, Door Bend, Plane Bend and collors ets.

Providing and fixing of 22mm/25mm/38mm dia P.V.C.conduit incl.cap casing of 2mm thick and its assessories like bound junction box etc to be recessed in wall and fixed on wall with rawal plugs , and caddles.

Providing and fixing of light points/fan points,wiring with 2.5mm square multi strand copper wire, P.V.C.insulated wire of approved quality through PVC conduit but excl.cost of conduit.

Providing and fixing,testing and commissioning of heating points in 4mm multi strand 7/36 insulated copper wire of approved quality through PVC conduits excl.cost of conduit but including cost of 1mm multi strand 1/18 PVC insulated copper wire for earthing.

Providing,fixing,testing and commissioning of 20 Amp twin socket heavy duty of SSK/ Havells/ Philips or equivalent make.

Providing,fixing,testing and commissioning of 225mm dia exhaust fan SSK/ Havells/ Philips or equivalent make complete with ceiling rose and silicon wire.

Providing,fixing,testing and commissioning of ceiling fan Standard make SSK/ Havells/ Philips or equivalent alongwith ceiling Rose and Silicon wire.

Providing and fixing,testing and commissioning of 20 Amp flush type switch of SSK/ Havells/ Philips or equivalent make.

Providing,fixing,testing and commissioning of 10/40/63 Amp Single pole MCB with its all accessories.

Providing,fixing,testing and commissioning of 10/40/63 Amp double pole MCB with its all accessories.

Providing,fixing of hylem backlite sheet complete with cutting,fixing on wooden frame of required size on wall surfaces.

Providing,fixing,testing and commissioning of MCB distribution board double door 8 way Havells / C&G/ Finolex /L&T/Bajaj or equilent make.

Providing,fixing,testing and commissioning of MCB distribution board double door 16 way Havells / C&G/ Finolex /L&T/Bajaj or equilent make.

Providing,fixing,testing and commissioning of 18 watt LED Havells/C&G/Philips/Bajaj or equivalent make.

Providing,fixing,testing and commissioning of Bulk Head Lights Havells/C&G/Philips/Bajaj or equivalent make.

Making of earthing pit by way of digging 10' deep pit and 6' wide dia incl.earthing electrode in the pit connecting the electrode with the main board of 8 SWG single strand copper cotton insulated through conduit pipe then filling the pit by way ofalternate layer of charcoal and salt making the main hole cover (complete job).

Supplying and laying of Service line copper 16 Sq mm of approve make and quality.

Construction of wooden bed of size 14'x8'x2' height made of kail wood joists and 19 mm thick 3 layer particle board including furnishing and 2 No beddings, 4 Pillows for Shift Staff

Supply of kitchen set like Utinsils and other cooking items and Rice Cooker, Bucket. Etc

Supply of washroom set like mug, bucket, brush, wiper, chappal, plastic seat, towel all complete

Providing and fixing of Gutters of Coloured Sheeting size 50x100x50mm including cost of 2No. PVC pipes 75mm dia upto a depth of 30 ft.

Providing and Fixing of Snow stopper made up of angle iron and flat iron of required size including a priming coat of Red Oxide.

Supply of pvc type four chairs and one table complete set.

Providing fixxing of one HP motor of approved make including power supply fitting all complete

Providing fixing of C.P brass curtain rods with soft silk/cotton cloth based curtains size of windows 5*5

Supply of one No. wooden Almirah made up of 19mm thick particle load board including hardware fittings and painting all complete .size of almirah 4ft*6ft*2ft wide.

Providing and fixing / installation of Air Conditioner (A.C) of 1.5 ton capacity of approved brand like Diakin, Hitachi, Panasonic, LG, Voltas 3 star brand hot and cold inverter type including stablizer 4KVA of approved brand and all other accessories including wiring for A.C complete job as directed at site including all carriages mechanical/ manual including cost of all sorts of head load (If any)

NOTE: 1. All the Executed works should be as per the approved drawings/PWD Schedule. 2. All the quoted rates should be inclusive of Freight,Insurance,Transportation,handling and all duties including GST.

MUSHTAQ AHMAD BHAT

A to Z Service Solution

M/S S A W INFRASTRUCTURE PVT LTD