Renovation/Maintenance work in some B and C Type flats at HRI, Prayagraj

Amount

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary. 35 mm thick Shutter

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. 100x10 mm

Aluminium Handle 125 mm

Providing and Fixing in position 12mm tk. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand)

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. Non decorative finish.

Providing and fixing fly proof shutters for doors, windows and clerestory windows using stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading including ISI marked M.S.pressed butt hinges bright finished of required size with necessary. 35 mm thick Shutter

Supply & fixing of 304 grade glossy finish stainless steel sink of size (18" x 24" x9") in the existing space of kitchen for sink with some modification including required acessories all complete as per direction of Engineering-in-charge

Providing and fixing CP Brass 32mm size West couppling of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing wire gauge in shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows

Supply & fixing of white vitreous china European type water closet pan with P/S trap (make Cera, Parryware)and white sheet cover including dismantling and cleaning of area of old Indian type water closet, rising the connecting pipe, filling down portion with cement concrete 1:2:4, converting kota stone floor with ceramic tiles (make Kajaria / Somany), providing and fixing of Nahani trap with C.P. Greating including required 3" PVC pipe for drainage and supply & fixture of two way tap (make Jaguar or equivalent) including health faucet (make Cera or equivalent) all complet job work. Size of floor area around 1.5sq mtr.

M/S SHARDA CONSTRUCTION

ELITE FURNITURES