GE U(N) 36 2022 23 REPAIRS TO FLOORING JOINERY BRICKWORK FLASE CEILING ROOFING PLINTH PROTECTION ROOF TREATMENT AND SANITARY FITTING IN JADU NATH ENCLAVE MD ACCN UNDER GE (N) UDHAMPUR

Amount

M&L for dismantling floor , hearth or wall tiling including cement mortar bedding complete, and rubbish off the premises, complete all as specified & directed by Engr-in-Charge.

M&L for non skid coloured ceramic tiles area of each tile exc. .11 sqm but n.exc. 18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM(1:4) incl skirting complete all as specified & directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade any colour 7 to 8 mm thick(Square or rectangular) polished, area of each tile not exceeding 0.36 sqm(Size 600mmx600mm) in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match, including screed bedding layers in CM 1:4 (10 mm thick) incl skirting complete all as specified & directed by Engr-in-Charge.

M&L for vitrified ceramic tiles any colour 7 to 8mm thick(Square or rectangular) polished Double charged, area of each tile exceeding 0.36 sqm (Size 600mmx600mm) but not exe 0.42 sqm in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed in CM 1:4 (10mm thick) incl skirting complete all as specified & directed by Engr-in-Charge.

S&F glazed ceramic tiles (coloured) on vertical surfaces of of size 450x350x7 / 350x250x7 mm thick set and jointed in neat cement slurry over 10mm thick rendering in CM 1:4 and pointed in coloured cement to match complete all as specified & directed by Engr-in-Charge.

M&L for 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate, finished even and rough as in floors to received tiles, complete all as specified & directed by Engr-in-Charge. by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed in CM 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed by Engr-in-Charge.

Ditto all as per SI No 07 above but on skirting including M & L screed of 10 mm thick in CM 1:3 complete all as specified & directed by Engr-in-Charge.

M&L for 18 to 20 mm thick,Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20 mm th screed bed in CM 1:4 complete all as specified & directed by Engr-in-Charge.

M&L for rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), all as specified & directed by Engr-in-Charge.

M&L for taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water complete all as specified & directed by Engr-in-Charge .

M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L for 15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified & directed by Engr-in-Charge.

M&L for 5 mm thick rendering on ceilings in cement mortar 1:3 and finished even and smooth mixed with water proofing compound complete all as specified & directed by Engr-in-Charge.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified & directed by Engr-in-Charge.

M&L for taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified & directed by Engr-in-Charge.

All as per item no 16 above but exceeding 1.5 Sqm and not exc 4 Sqm each.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified & directed by Engr-in-Charge

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified & directed by Engr-in-Charge.

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & directed by Engr-in-Charge.

All as per item no 20 above but glazed and skeleton shutter with sash bar for glass / wire gauge complete all as specified & directed by Engr-in-Charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified & directed by Engr-in-Charge.

S&F aluminum anodised bolts barrels tower bolts with bright both 150mm long complete all as specified & directed by Engr-in-Charge.

S&F aluminium alloy ,anodised,sliding door bolt 300 mm length with hasp,staple (bolt type) and fixing clip of sheet,cast or etruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed complete all as specified & directed by Engr-in-Charge.

S&F aluminium handle cast type 150mm long oval type complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern white including fixing bolts including connection P trap etc to drain pipe ( or out going pipe) and to flushing pipe , antisyphonage pipe etc complete.all as specified & directed by Engr-in-Charge.

S&F vitreous china squatting pan ‘Orissa’ pattern size 580X440mm , white with integral foot rest (Excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap all as specified & directed by Engr-in-Charge. .

S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handle of low or high density and 15mm PVC connection 450mm long complete.all as specified & directed by Engr-in-Charge.

M&L for demolition of brick work or stone boulder masonery built in cement mortor including all quoins arches pillars etc complete all as specified & directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius but in cm 1:4 complete.all as specified & directed by Engr-in-Charge.

S&F inrepair Viterous china wash basin pedestral type white flat back size 550 x 400mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 xincl 6mm embedded in PCC block with PCC 1:2:4 type B-1 and Incl 450mm PVC waste pipe getting with holes complete all as specified & directed by Engr-in-Charge.

S&F pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm complete all as specified & directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed by Engr-in-Charge.

S&F in repair towel rail 600mm long aluminium tower bolts 20mm D type complete all as specified & directed by Engr-in-Charge.

M&L for prepration of new decorated surfaces and applying two coats of distemper oil emulsion on walls over a coat of primer over 3 to 3mm thick wall care putty complete all as specified & directed by Engr-in-Charge.

M&L for three coat of white wash on new surface of ceiling complete all as specified & directed by Engr-in-Charge.

M & L two coat of cement base paint over newly plastered surfaces of wall including preparing surfaces complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia. complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia. complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 25mm dia. complete all as specified & directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified & directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore complete all as specified & directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 25mm bore complete all as specified & directed by Engr-in-Charge.

S&Fin repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia. complete all as specified & directed by Engr-in-Charge.

S&F in repair 15mm Bib taps, cast copper alloy, fency type chromium plated, with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engr-in-Charge.

S&F in PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed by Engr-in-Charge.

S&F in repair rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top three layered white in colour) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 500 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge.

S&F in repair rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top three layered white in colour) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 1000 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge.

S&F ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified & directed by Engr-in-Charge.

M&L for plain cement concrete 1:4:8 type D-2 as in floors 75mm thick complete all as specified & directed by Engr-in-Charge.

M&L for 40 mm thick flooring in plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even and smooth using extra cement (staircase incl steps) complete all as specified & directed by Engr-in-Charge.

M&L for Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified & directed by Engr-in-Charge.

M &L for 25mm thick Sand cusioning /filling under floors or complete all as specified & directed by Engr-in-Charge.

M&L for chequred cement concrete tile size 20cmx 20cm x 25mm thick machine pressed set & jointed in neat cement slurry as in floors joint fiil up with white grey cement & pigments all including 15mm thick screed bed with CM 1:4 all as specified & directed by Engr-In-Charge.

S&F towel ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified & directed by Engr-in-Charge.

M & L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed by Engr-in-Charge.

M & L for reinforced cement concrete M-25(design mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering with water proofing compound as directed laid/made to slope as in RCC roof surfaces complete all as specified & directed by Engr-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified & directed by Engr-in-Charge.

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed by Engr-in-Charge.

M & L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

M & L for mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

M & L for galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mm complete all as specified & directed by Engr-in-Charge.

M & L for factory made steel windows (Box type) with and with out glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge.

M & L for providing and fixing 30mm thick factory made PVC door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing,complete all as specified & directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings, complete all as specified & directed by Engr-in-Charge.

M & L for 18/19mm thick prelaminated particle board medium density flat pressed single layer type or three layer type with BWR type adhesive.complete all as specified & directed by Engr-in-Charge.

M & L for hasp and staple, 100 mm, mild steel, safety type, stove enalmelled black , including bolt to hinge plate and fixed with screws, complete all as specified & directed by Engr-in-Charge.

S & F Continuous ( Piano ) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm complete all as specified & directed by Engr-in-Charge.

M & L for dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified & directed by Engr-in-Charge.

S&F non asbestos fibre Cement board ceiling 4mm, thick in 605x605mm panel (Make-everest) designed ceiling conforming to IS-14862 type B category three including snapgrid frame work, hold fast, suspenders fixed in repair complete all as specified & directed by Engr-in-Charge.

M & L for hacking out old broken glass any thickness, size quality from wooden frame or steel frame glazed with putty or fixed with beads complete all as specified & directed by Engr-in-Charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified & directed by Engr-in-Charge.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.

M & L for dismantling of CGI/AC/ any others sheet of any description incl ridges etc all as specified & directed by Engr-In-Charge.

M & L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

M & L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR). Pipe 110mm dia in any length with rubber ring joints, fixed to walls any height including taking down complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR). Pipe 75 mm dia in any length with rubber ring joints, fixed to walls any height including taking downcomplete all as specified & directed by Engr-in-Charge.

M & L for dismantling of boarding any description fixed in any position with nails complete all as specified & directed by Engr-in-Charge.

S&F solid PVC Wall Lining ( Wall Panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame complete all as specified & directed by Engr-in-Charge.

M/S IMTESH BHAT

SATYA SALES AND BUILDERS