Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 CrAccepted-AOC STREET NO 11 SECTOR NO 04 TILAK NAGAR SAGAR ROAD BIKANER RAJASTHAN 334001 | BIKANER | RAJASTHAN | 334001 | ₹3.5 Cr | L1 | Accepted-AOC Being L1 |
| 2 | L2₹3.7 CrRejected-Finance | ₹3.7 Cr | L2 | Rejected-Finance Being other than L1 |
| 3 | L3₹3.7 CrRejected-Finance BAKRON KA WADA NEAR NEELAM CINEMA JODHPUR ROAD BALOTRA BARMER RAJASTHAN 344022 | BALOTRA | BARMER | RAJASTHAN | 344022 | ₹3.7 Cr | L3 | Rejected-Finance Being other than L1 |
| 4 | L4₹3.7 CrRejected-Finance PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | ₹3.7 Cr | L4 | Rejected-Finance Being other than L1 |
| 5 | L5₹3.9 CrRejected-Finance | ₹3.9 Cr | L5 | Rejected-Finance Being other than L1 |
| Sl No | Description | Qty | Unit | Brahma Infra L3 | M/S BUDHRAM BISHNOI L4 | HARI SINGH AND COMPANY L2 | Jasraj & Company L1 | Ms Ali Mohd Abdul Mazid L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Lump sum price worked out by the tenderer for “BUILDING WORK" as listed in Schedule ‘A’ Part - I | 1 | Lump sum | 1,71,56,867 ₹1.7 Cr | 1,63,51,529 ₹1.6 Cr | 1,71,91,719 ₹1.7 Cr | 1,55,31,479.6 ₹1.6 Cr | 1,92,26,992 ₹1.9 Cr |
| 2.00Subtotal | ||||||||
| 3.00 | Lump sum price worked out by the tenderer for “INTERNAL ELECTRIFICATION WORK" as listed in Schedule ‘A’ Part - II | 1 | Pre-priced | 7,38,757.72 ₹7.4 L | 6,99,529 ₹7.0 L | 7,40,000 ₹7.4 L | 6,22,111.76 ₹6.2 L | 7,75,000 ₹7.8 L |
| 4.00Subtotal | ||||||||
| 5.00 | Lump sum price worked out by the tenderer for “INTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Part - III | 1 | Pre-priced | 39,758.28 ₹39,758.28 | 46,529 ₹46,529 | 44,500 ₹44,500 | 59,637.42 ₹59,637.42 | 42,000 ₹42,000 |
| 6.00Subtotal | ||||||||
| 7.00 | Lump sum price worked out by the tenderer for “ROAD , PATH & CULVERTS WORKS" as listed in Schedule ‘A’ Part - IV | 1 | Pre-priced | 49,24,050.89 ₹49.2 L | 48,25,529 ₹48.3 L | 47,40,000 ₹47.4 L | 44,05,729.76 ₹44.1 L | 43,51,000 ₹43.5 L |
| 8.00Subtotal | ||||||||
| 9.00 | Lump sum price worked out by the tenderer for “AREA DRAINAGE WORKS" as listed in Schedule ‘A’ Part -V | 1 | Pre-priced | 21,51,752.82 ₹21.5 L | 19,19,529 ₹19.2 L | 22,40,000 ₹22.4 L | 18,28,989.89 ₹18.3 L | 19,00,000 ₹19 L |
| 10.00Subtotal | ||||||||
Updated dates
Tender Value
₹3.4 Cr
EMD Value
₹4.2 L
Closing Date
5 Mar 2026, 6:00 pmClosed
Chief Engineer Bathinda zone
HQ CE Bathinda Zone, Bathinda Mil Stn-151004
PROVN OF STATION SAINIK INSTITUTE AT BIKANER
2025_MES_738116_2
84538 CE BTZ/BKN/TOKEN-44 OF 2025-26
Open Tender
Civil Works
548 days
GE (P) Bikaner
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,000
GE (P) Bikaner
₹4.2 L
Yes
30 Mar 2026
14 Feb 2026
7 Mar 2026
14 Feb 2026
5 Mar 2026
20 Feb 2026
14 Feb 2026 - 26 Feb 2026
Lump sum price worked out by the tenderer for “BUILDING WORK" as listed in Schedule ‘A’ Part - I
Subtotal
Lump sum price worked out by the tenderer for “INTERNAL ELECTRIFICATION WORK" as listed in Schedule ‘A’ Part - II
Subtotal
Lump sum price worked out by the tenderer for “INTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Part - III
Subtotal
Lump sum price worked out by the tenderer for “ROAD , PATH & CULVERTS WORKS" as listed in Schedule ‘A’ Part - IV
Subtotal
Lump sum price worked out by the tenderer for “AREA DRAINAGE WORKS" as listed in Schedule ‘A’ Part -V
Subtotal
Lump sum price worked out by the tenderer for “SEWAGE DISPOSAL WORKS" as listed in Schedule ‘A’ Part VI
Subtotal
Lump sum price worked out by the tenderer for “COMPOUND WALL, FENCING & GATE" as listed in Schedule ‘A’ Part -VII
Subtotal
Lump sum price worked out by the tenderer for “EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part -VIII
Subtotal
Lump sum price worked out by the tenderer for “SUMMAR APPLIANCE" as listed in Schedule ‘A’ Part -IX
Subtotal
Lump sum price worked out by the tenderer for “SITE CLEARANCE AND EARTHWORK" as listed in Schedule ‘A’ Part -X
Subtotal
Lump sum price worked out by the tenderer for “ARBOURICULTURE WORK" as listed in Schedule ‘A’ Part -XI
Subtotal
Lump sum price worked out by the tenderer for “RAIN WATER HARVESTING" as listed in Schedule ‘A’ Part -XII
Subtotal
Lump sum price worked out by the tenderer for “REFRIGERATOR AND DEEP FREEZER" as listed in Schedule ‘A’ Part -XIII
Subtotal
Lump sum price worked out by the tenderer for “HOT WATER SUPPLY (SPL WORK)" as listed in Schedule ‘A’ Part -XIV
Lump sum price worked out by the tenderer for “EXTERNAL ELECTRIC SUPPLY" as listed in Schedule ‘A' Part -XV
Subtotal
Schedule ‘A’ Part - XVI (Misc)
Supply and fixing Pop-Up Impact sprinkler of heavy duty Plastic, adjustable to full-circle or Part circle with diffuser screw for fine drop lets and throw control, inlet size 3/4", having dia of throw up to 12 mtrs at pressure 2-4 kg/cm² having discharge 456-1192 Ltr/Hrs complete all as specified and directed by engineer -In-Charge. Make Aquaturf.
Supply and fixing Swing joint full three way adjustability including height for Pop-Up Impact Sprinkler, bush with connected accessories, durable polyethylene construction for 3/4" size. Complete all as specified and directed by Engineer -In-Charge.Make Aquaturf/Elitech Drip
Supply and fixing PP Service saddle size 63mmx20mm with steel reinforced to be fixed over 63mm dia pipe for jointing of swing joint to PVC Pipe for Pop-up Sprinkler complete all as specified and directed.
Supply, install , testing and commissioning of horizontal open well submersible pump electric driven motor 3.0 HP/2.25 KW capacity, with supply voltage 415V, 3 Phase, 50Hz suitable for operation with operating head 10-28 Mtr and having capacity to discharge water 11.9-2 LPS with suction and discharge flanged suction 65 X 50mm with suction and delivery water line including flat Submercible copper conductor cable of size 4 Sqmm 3 Core from panel to motor as per manufacturer instructions including all connected accessories complete all as specified and directed by Engineer - In - Charge..(Make : CG /Kirloskar/MBH Pumps/KSB/Mather or eaquivalent).(For EP)
Supply anf fix Rotational moulded HDPE water (storage) tank of 5000 Ltrs capacity (Cylindrical vertical tank with closed top) hoisted on roof/ lowered underground and fixed in position including making necessary arrangements for fixing inlet, outlet overflow pipe and provision of washout pipe with and including circular platform of height 30Cm below the tank and base 25Cm more than the external dia of tank casted into two layers of PCC wth first layer of 15Cm thickness of PCC 1:2:4 type B2 using with 40 mm graded aggregate and second top layer 15Cm thickness in PCC 1:3:6 type C1 using with 20 mm graded aggregate with smooth finish to exposed concrete surfaces including necessary form work etc complete all as specified and as directed by Engineer-In-Charge. Note :- (i) The water storage tank shall be tripple layer, HDPE tank moulded to seemless perfection of rotation moulding process.The tanks shall be manufactured only from FDA approved special grade poly ethelene and shall be certified fit for portable water including necessary foundation for placing the water tank.complete all as specified and directed. (Make :- Polycon/ Modi/Ganga/Sintex or eaquivalent). (ii) HDPE storage tank shall be as per IS- 12701. (iii) Necessary Earth work shall be meaasured and paid sepaerately.
Supply, install , testing and commissioning of horizontal open well submersible pump electric driven motor 7.5HP, 5.60 KW capacity, with supply voltage 415V, 3 Phase, 50Hz suitable for operation with operating head 20 - 30 Mtr and having capacity to discharge water 880 - 825 LPM with suction and discharge flanged suction 65 X 50mm with suction and delivery water line including flat Submercible copper conductor cable of size 6 Sqmm 3 Core from panel to motor as per manufacturer instructions including all connected accessories complete all as specified and directed by Engineer - In - Charge..(Make : CG /Kirloskar/MBH Pumps/KSB/Mather or eaquivalent
Angular jet fountain nozzel of gun metal with crome plated size inner dia 10 mm outer dia 12 mm Make: Raj, Aroma, creative or eaquivalent complete all as specified and directed.
Air jet fountain nozzel of gun metal with crome plated size inner dia 10 mm outer dia 12 mm Make: Raj, Aroma, creative or equivalent complete all as specified and directed.
Supply and fix heavy duty class "B" GI Pipe and Fittings of Dia 50 mm Bore including valve, Cutting connection, fabrication with all connected accessories for making arrangement for supply of water from pump to nozzles (Inner and Outer ring of foundain) suitable for foundain of 1.5 mtr dia complete all as specified and directed.
LED base water proof programmable colour changing lights as per site requirement ABS, PVC Body, RGB Colour, operating voltage 18V DC colour programmable complete all as specified and directed.
Supply and fixing DMX controller for changing colour of light, micro processing controller with 18 V transformer as per site requirement having contrast show, medium fast or fading of colour mode. Make : Creative or equivalent. complete all as specified and directed. (One for Inner ring of fontain and one for Outer ring of Fountain)
Construction of valve chamber size 600x600x600 mm in PCC block of (1:4:8) built in CM (1:6) with MS cover 3mm thick double door type fixed to MS angle Iron frame using 50mm x 50mm x 6mm with locking arrangement including excavation and earth work in any type of soil, PCC (1:4:8) type D2 as in foundation, PCC (1:3:6) type CI using 20 mm graded stone aggregate as in bed, plastering 15 mm thick in CM (1:4) finished even & smooth without using extra cement and painting with one coat of red oxide primer and two coats synthetic enamel paint on all steel surfaces complete all as specified and directed by Engr-in-Charge. (For Foundain)
Supply, installing, commissioning and testing LT panel board (out door type) cubical type made out of CRCA sheet 3.15 mm thick dust and vermin proof and angle iron of suitable size , pedestal frame grouted in PCC (1:2:4) type B-1 20mm graded stone aggregated thimble and cable entry boxes with cable glands. Panel should covered from all sides with front and back lockable door and hinges complete with aluminum bush bar of capacity 50 Amps, TPN, three phase, 04 wire (In separate chamber) including painting with two coats synthetic enameled paint over a coat of red oxide primer and consisting of the following :-
(a) Supply and fix 4 Pole MCCB 32 Amp, 50 Hz, 415 V with rupturing capacity, Thermal megnatic relay adjustable type 16/18 KA. – 01 Nos (Incomer)
(b) Supply and fix MCB 3 Pole (TP) , 20 Amp, 10kA, C Curve rating suitable for 415 Volts (Out going ). – 01 Nos
(c) Supply and fix MCB 3 Pole (TP) , 16 Amp, 10kA, C Curve rating suitable for 415 Volts (Out going ). – 01 Nos
(d) Supply and fix MCB 2 Pole (DP) , 16 Amp, 10kA, C Curve rating suitable for 240 Volts (Out going ). – 02 Nos
(e) DOL Starter for 7.5 HP/5.5KW with contractor (AC-3) and overlaod relay - 01 Nos
(f) DOL Starter for 3 HP/2.2KW with contractor (AC-3) and overlaod relay - 01 Nos
(g) Space for MCCB of - 01 Nos (Spare )
(h) Space for MCB SPN of - 04 No (Spare)
(l) LED Indicated Lamp (R,Y,B)
M&L for Earthing complete with galvanized iron slotted pipe of dia 40mm bore, 3 mtr long (earth pit not less than 10 mtr deep below normal ground level) surrounded by adequate quantity of charcoal, dust and salt to packed thickness of 15 cm on all sides, connected to GI Strip 32X6 mm by means of bolts, nuts check nuts and washers of galvanized iron and steel earth and rivetted/welded to earth plate at one end and other end of strip connected to equipemnent body/ test point with two nos nuts , bolts including 32X6 mm flat iron clamp. nuts bolts and washers and also watering pipe 20mm bore GI pipe medium garde from earth p[it to top electrode including funnel, wire mesh,copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40 mm thick PCC 1:2:4 type B1 cover complete all as shown in electrical plate No 3 of SSR Part-I including necessary excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50 mtr complete all as specified and as directed. Note :- PCC Chamber shall be constructed atleast 1.5 Mtr away from the earthing electrode and pipe for watering shall be provided in stanting manner.
Supply ,installation ,Testing and commissioning platform/Pole mouting outdoor type, Step down distribution transformer of 11/0.433 KV, capacity 100 KVA, ONAN cooled oil immersed copper wound transformer complete with first filling of IS : 335 ISI marked filtered & dehydrated transformer oil and other standard fittings / accessories and 7 position off circuit tap changer (tapping range + 7.5% in steps of 2.5% Each) whith vector Group Dyn - 11, including under mentioned parameters and accessories complete all as specified and directed. Make INDIAN Transformers and electricals Pvt. ltd. Gurgaon, Bajaj, Volt Amp. (a) Rating :200 KVA , EEL-2 of IS:1180 (Part-1) 2014 with amd NO 1,2,3 & 4. Formerly EEL-3 (till 30.03. 2022) (b) Total losses @ 50% Load :670 (c) Total losses @ 100% Load :2100 (d) HV Cable Box :W/O Cable Glands (e) LV Cable Box :W/O Cable Glands (f) Vector group reference - Dyn-11.
Supply and erect factory made 7 mtr long hot dip galvanized ( as per relevant IS with average coating thickness 65 micron) octagonal poles confiorm to IS-2062/BSEN 10025 with 130mm dia at bottom and 70 mm dia at top A/F made up of 3 mm thick HT sheet alongwith foundation type base plate of size 220X220X12 mm foundation bolt 04 Nos of M20X600 mm high 'J' type EN8 grade, including 1 mtr long hot dip galvanized single arm (swan neck) bracket made up of 40mm dia GI pipecomplete all as specified and as directed.
M&L for Earthing complete with galvanized iron slotted pipe of dia 40mm bore, 3 mtr long (earth pit not less than 10 mtr deep below normal ground level) surrounded by adequate quantity of charcoal, dust and salt to packed thickness of 15 cm on all sides, connected to GI Strip 32X6 mm by means of bolts, nuts check nuts and washers of galvanized iron and steel earth and rivetted/welded to earth plate at one end and other end of strip connected to equipemnent body/ test point with two nos nuts , bolts including 32X6 mm flat iron clamp. nuts bolts and washers and also watering pipe 20mm bore GI pipe medium garde from earth p[it to top electrode including funnel, wire mesh,copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40 mm thick PCC 1:2:4 type B1 cover complete all as shown in electrical plate No 3 of SSR Part-I including necessary excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50 mtr complete all as specified and as directed. Note :- PCC Chamber shall be constructed atleast 1.5 Mtr away from the earthing electrode and pipe for watering shall be provided in stanting manner.
Supply, installing, commissioning and testing LT panel board (out door type) cubical type made out of CRCA sheet 3.15 mm thick dust and vermin proof and angle iron of suitable size , pedestal frame grouted in PCC (1:2:4) type B-1 20mm graded stone aggregated thimble with minimum depth of 750 mm and cable entry boxes with cable glands. Panel should covered from all sides with front and back lockable door and hinges complete with aluminum bush bar of capacity 240 Amps, TPN, three phase, 04 wire (In separate chamber) including painting with two coats synthetic enameled paint over a coat of red oxide primer and consisting of the following :- (LT Panel No 4)
(a) Supply and fix 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity, Thermal megnatic relay adjustable type 25 KA. – 01 Nos (Incomer)
(b) Supply and fix 4 Pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity, Thermal megnatic relay adjustable type 16/18 KA. – 01 Nos( Outcoming)
(c) Supply and fix 4 Pole MCCB 25 Amp, 50 Hz, 250 V with rupturing capacity,16/18 KA. – 01 Nos( Outcoming)
(d) Supply and fix MCB 2 Pole (SPN) , 25 Amp, 10kA, B Curve rating suitable for 240 Volts (Out going ). – 04 Nos
(e) Space for MCCB of - 01 Nos (Spare )
(f) Space for MCB SPN of - 02 No (Spare)
(j) LED Indicated Lamp (R,Y,B)
M&L Cable route / path indicators made out of 40x40x4mm angle iron 1.2 mtr long and plate of size 100x150x6mm welded only on one side end havinng embossed on plate as cable HT including PCC 1:4:8 of size 30cmx30cmx 30cm duly embedded the angle iron in PCC including excavation / earth work complete all as specified and directed.( each 40 RM)
Supply laying of double wall corrigated pipe of outer dia 63 mm and inner dia 50mm for cable protection complete all as specified and as directed
Supply laying of double wall corrigated pipe of outer dia 90 mm and inner dia 76mm for cable protection complete all as specified and as directed
Supply ,installation ,testing and commissioning of 11KV, 630 Amp,21KA ,Ring Main Unit, , ManualOperated,Non Extensible, Outdoor Type with one incomer and one outgoing with following specification :- STANDARD - IEC 62271-200 RMU TYPE -11kV,630A,21KA/3SEC, VD NE MANUAL OUTDOOR SAFELINK RMU RATED VOLTAGE - 12 KV RATED BUSBAR CURRENT - 630 Amp RATED FREQUENCY- 50 Hz, POWER FREQUENCY WITHSTAND VOLTAGE / BIL -38 KV/98 KVp ,RATED SHORT CIRCUIT CURRENT-21KA ,RATED SHORT CIRCUIT CURRENT DURATION - 3sec ,DEGREE OF PROTECTION-TANK -IP67 ,DEGREE OF PROTECTION-SWITCHGEAR -IP54 ,BUS BAR MATERIAL -Copper ,AMBIENT TEMPERATURE (-)25 to 40degree C ,RMU FRONT COVER PAINT SHADE -RAl7035 ,RMU ENCLOSURE PAINT SHADE -DA GREY 632 OF IS5 ,ALTITUDE - <1000m ,BUSBAR INSULATING GAS -SF6 ,NOMINAL OPERATING GAS PRESSURE -1.2 Bar @20 deg C and Gas leakgae /annum -0.1% incl all foundation work all as specified and as direted .
Supplying and laying of CPVC pipes of dia 80mm SCH 40 in trenches including all fitting complete all as specified.
Supply and fixing Ductile iron sluice valve 80 mm dia with flanged ends class I PN 1.0 (heavy duty ISI marked) confirming to IS:14846-2000, drilled type, gun metal spindle non raising type, with brass ring, iron wheel handle, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc complete all as specified and as directed.
Construction of Valve pit size 100cm X 100cm x 100cm of brick masonary from the top of surface including cover of MS Sheet 3.15 m thick and angle iron 40mm x40mm x 6 mm with hinges and locking arrangement including painting with two coat of synthetic ernamelled paint over a coat of red oxide and grouting to PCC 1:2:4 plastering in cement morter 1:3 foundation concrete 1:3:6 including necessary earthwork complete all as specified and directed .
Construction of Valve pit size 75cm X 75cm x 75cm of brick masonary from the top of surface including cover of MS Sheet 3.15 m thick and angle iron 40mm x40mm x 6 mm with hinges and locking arrangement including painting with two coat of synthetic ernamelled paint over a coat of red oxide and grouting to PCC 1:2:4 plastering in cement morter 1:3 foundation concrete 1:3:6 including necessary earthwork complete all as specified and directed .
Supply and Installation of Desert cooler electric driven single phase 230 volts Steel body having nominal air flow capacity of 4000 Cu M per hours with necessary inlet connection with HDPE/Flexible pipe both ends CP brass complete including electric connection complete all as specified and as directed.
Supply & installation of voltage stabilizer of capacity 1 KVA for automatic operation, single phase naturally air cooled indoor type & Design for input voltage variation between 170V to 250 V with output voltage stabilizer at 230 V with accuracy of +/- 2.5% complete as specified and as directed.
Supply installation commissioning of Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of 2.5% and of capacity 5 KVA.
Supply and fixing ,testing, commissioning frost free double door refrigerator electric driven single phase 230 volts, AC 50 Hz of Capacity 310 Ltr with BEE 5 star rated complete all as specified and as directed.
Supply & fix Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of 2.5% and of capacity 1 KVA.
S&L for DWCPE (SN8) confirming to IS-16098,150mm nominal bore (160mm OD) complete laid in trenches on and including bed 100 mm thick bedding compressing of well compected clean poorly graded gravel,gravel/sand mixture with little or no fines to required slope,including all accessorries/fitting/jointed and testing complete all as specified and directed.
S&L for DWCPE (SN8) confirming to IS-16098,200mm nominal bore (238mm OD) complete laid in trenches on and including bed 100 mm thick bedding compressing of well compected clean poorly graded gravel,gravel/sand mixture with little or no fines to required slope,including all accessorries/fitting/jointed and testing complete all as specified and directed.
M&L for loose filling with broken stone or boulder aggregate of gauge 20 as in filter bed complete all as specied.
Supply and planting of Hedge (of golden duranta) as directed by Engineer-in-Charge including creation of beds by excavating 60 cm deep and 60 cm wide trenching the excavated base to a further depth of 30 cm refilling the excavated earth after breaking clods and mixing with manure in the ratio 8:1 (8 part of stacked volume of earth after reduction of 20% with 1 part of stacked volume of manure after reduction by 8%) and flooding with water filling with earth if necessary, watering and finally fine dressing levelling etc inclding stacking and disposal of material decleared unserviceable and surplus earth by spreading and levelling as directed within a lead of 50 m and lift upto 1.5 m complete all as specified and as directed.
Supply and planting of following plants in 0.25m to 0.30 poly bags with height as mentioned below including digging holes 1.2m dia x 1.20m deep in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio 2:1 (2 parts of stacked volume of earth after reduction of 20% with 1 part of stacked volume of sludge or manure after reduction by 8%) flooding with water and removal of surplus soil, with & including antitermite treatment using suitable chemicals as required and making 'Thaola' complete all as specified.
Bottle Palm ( Minimum height 4 to 5 feet above ground)
Bogounvillia ( Minimum height 3 to 4 feet above ground)
Tikoma ( Minimum height 3 to 4 feet above ground)
Kaner of white or yellow flower ( Minimum height 3 to 4 feet above ground)
Neem ( Minimum height 4 to 5 feet above ground)
Ashoka Plant ( Minimum height 4 to 5 feet above ground)
M&L for maintenance of all plants and Grass by weeding, hosing, saucer making once in every month for plants/hedge, once in every 15 days for Carpet Grass / Country Grass / Doob Grass, Burmuda Grass, pruning dried branches once in every week, depositing the material at places as directed by Engineer-in-charge and planting the new plants in place of dead plants of same species and height turing with doods wherever required by replacing the dead plants of grass of any type with same grass as required without any extra cost to the department including water pump operation on daily basis (minimum two hours daily) for watering the plants, Hedges, Shrubbery and Grass and cleaning the filters in irrigation system whenever required complete all as specified and as directed.
Supply and instalation of modular kitchen setup for below the granite top kitchen otta. Framing of partition in powder coated aluminium pipe of 25x50mmx1mm thickness for fixing shutters and drawers units. Teak wood pattern pipe frame fixed with L-shaped ss angles. All drawers units must be of' Hitech' make raft clossing system. All the facia for drawers units and shutters should be made of 18mm thick prelaminated WPC board with highglass laminate 1mm thick on outside and 0.8mm thick highglass laminate at innerside. Edge Should be fitted with 1.30mm thick high glass edge band on all shutters and drawers facia incl all fittings and water proofing sheet below granite all as specified and directed.
Supply and fixed Overhead cabinate should be of 600mm height made from 18mm thick prelaminated WPC board. Outside it should be fitted with 1.0mm thick high glass laminate and inside surface should be fixed with 0.8mm thick high glass laminate.All edges should be fixed with 0.8mm thick high glass edge band length of the cabinate should be divided with partition of plywood as per requirement. Overhead cabinate shutters should be ope on top with auto closing hinges and gas lift make "Hitech" Length of overhead cabinate can be extended to any length as per requirement. Note: V -channel handle must be provided to all over head cabinate shutter, openable shutter and drawer units below otta level as specified and directed
Chair Easy (FD-229)
Table Office clerk (FD-1004)
Stool Steel (FD-409)
Ladder Aluminium (FD-1025)
Durrie 15'x12' (TP)
Table900x900mm Steel (FD-1009)
Table 900x600mm with Drawer Steel (FD-1008)
Table 900x600mm without Drawer Steel (FD- 1007)
Teapoy (FD-278)
Receptacle PVC (FD/E6/MAP/13)
Chair Multi Seater Steel , Make Superq, Make: Godrej, Model: MATRIX (FUMTX3XS402SXTRD)/ Make: Durian, Model: TTRACK3/ Make Superq, Model: Three Seater Settee Indian (SS-304 Grade) (TP)
Table Serving 6'x3' (FD-411)
Chair Writing Cushion (FD/E6/MAP/12)
Restaurant Chair Make :Durian Model :Lister or equivalent model in Godrej/ Geeken (TP)
Chair Verandah (FD_256)
Teapoy Verandah MAP (FD/E6/MAP/17)
Supply & fixing Long body Bib tap Suitable for 15 mm bore pipe, cast copper alloy, fancy type chromium plated, screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for brass ferrule & fixed, complete all as specified and as directed
S & F Urinal spreader of cast copper alloy, fancy type chromium plated, screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed suitable for 15 mm bore of pipe including necessary fittings & fixed complete all as specified and as directed and shown on drawing.
Supply & fixing PVC connection 15 mm size with cast copper alloy nuts of length 450 mm & fixed complete all as specified and as directed and shown on drawing
Supply & fixing Stainless steel Solid body fancy type peg set of six and fixed in position with steel with steel screws,complete all as specified and as directed and shown on drawing
S&F PVC pipe(6kg/sqcm)) IS: 4985:2000 size of 63mm dia for sub distribution line icluding all accessories (ie socket, blend elbow, Tee, Reducer, connector, solvent, clamps etc) all as specified and directed.
Subtotal
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_843086.xls
BOQ • 0.39 MB
tendercomplete.pdf
Tender Documents • 1.61 MB
structuraldrawings.rar
Additional Documents • 25.46 MB
TDDrawings1.rar
Tender Documents • 23.63 MB
TDDrawings2.rar
Tender Documents • 23.86 MB
Download all tender documents and submit your bid