Repair cum Renovation works for Office Building including Interior Works and Services at IFCI Tower,16th Floor, Nehru Place, New Delhi.

Providing and laying Autoclaved Aerated concrete(AAC) blocks

masonry with 150mm to 300 mm thick with Grade-1 AAC blocks of

density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super

structure above plinth level up to floor V level with RCC band at sill

2.0 6.47 level and lintel level with approved block laying polymer modified cum 8,333.65 8.04 66,977.55

adhesive mortar all complete as per direction of Engineer-in-

Charge. (The payment of RCC band and reinforcement shall be

made for seperately).

Providing and laying Autoclaved Aerated concrete(AAC) blocks

masonry 100 mm/ 125 mm thick with Grade-1 AAC blocks of

density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super

3.0 6.38 structure above plinth level up to floor V level in cement mortar cum 10,195.45 3.41 34,734.62

1:4 (1 cement : 4 coarse sand). The rate includes providing and

placing in position 2 Nos 6 mm dia M.S. bars at every third course

of masonry work.

TOTAL MASONRY WORK 1,12,947.70 -

Stone tile (polished) work for wall lining over 12 mm thick bed of

4.0 8.9 cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry

@ 3.3 kg/sqm including pointing in white cement complete.

4.1 8.9.1 8mm thick Granite of any colour and shade Sqm 3,617.55 77.63 2,80,843.43

Providing and fixing specified wood frame work consisting of

5 8.27 battens 50x25mm fixed with rawl plug and drilling necessary holes

for rawl plug etc. including priming coat complete.

5.1 8.27.1 Kiln seasoned and chemically treated hollock wood Cum 1,87,277.66 0.27 50,747.04

Providing and fixing plywood 4 mm thick, one side decorative

veneer conforming to IS: 1328 (type-1), for plain lining / cladding

with necessary screws, including priming coat on unexposed

6.1 8.28.1 Decorative veneer facings of approved manufacture Sqm 1,946.25 70.39 1,37,005.30

Stone work (machine cut edges) for wall lining etc. (veneer work)

upto 10 metre height, backing filled with a grout of average 12

mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including

pointing in white cement mortar 1:2 (1 white cement : 2 stone

dust) with an admixture of pigment matching the stone shade : (To

be secured to the backing and the sides by means of cramps and

pins which shall be paid for separately)

8.14.5.1 30mm thick White sand stone Sqm 3,256.67 15.45 50,313.92

Providing And Pasting 3D Wall Paper of approved Quality and

line and level, Including all fixing asseccories, Scaffolding And all

Labour etc. complete. Spec. No. As directed by Engineer in Charge.

Using new digital inkjet printing technologies ultraviolet (UV).

8 M.R Wallpaper consists of a backing, ground coat, applied ink, and Sqm 3,896.37 12.39 48,271.10

sometimes paste on the backing used to adhere the paper to the

wall. Nonwoven backings can be of ground wood, wood pulp, or

wood pulp with synthetic material.

Digitally signed by AVDHESH

Repair/Renovation works for Office Building including Interior Works and Services at IFCI Tower,16 th floor, Nehru Place, New Delhi”

BOQ Civil works

S. NO Ref. Description of Item Unit RATE Qty

Fabric stretched Acoustic wall panelling system:

Providing and fixing of Acoustic wall Fabric panel system using PVC

Grippers to Stretch the Fabric (Approved Colour & Pattern of

Fabric with density of Less than 300 GSM ) as per ASTM E 84 &

thermal conductivity 0.034w/mk with desired acoustic

management 0.80 NRC. The G.I frame ( Base Frame after

soundproof membrane ) of thickness 0.50 consist of GI metal stud

frame of size 50mm having one flange of 41mm and other of

44mm placed @ every 600 mm c/c in vertical direction. The

MICRONE ( for Sound Insulation - Acoustical Property ) of

9 M.R thickness 50mm and density 40Kg/m3 is fixed in between studs Sqm 5,451.62 72.29 3,94,108.69

enact with chicken mess ( Purpose to hold the MICRONE to its

place firmly ) .On outer side one layer of 12 mm perforated WPC

BOARD ( Water Proof with High Density Board with Acoustical &

Soundproofing Properties ) is screwed. Screw fixing is done

mechanically. WPC boards Perforation ( Holes to trap the sound

within to eliminate ECHO 100% ) to be done at site according to

technical Specification of Proposed AV Systems & Equipments . A

layer of 1/2" thick Dycrone (Synthetic wool to filter the sound -

hard to soft ) is fixed on the perforated WPC baord to give

cushioning to the pannels and fabric is streched Through PVC

SH-8 MARBLE & GRANITE WORK

Providing and fixing 18 mm thick gang saw cut, mirror

polished,premoulded and prepolished, machine cut for kitchen

platforms, vanitycounters, window sills, facias and similar

locations of required size,approved shade, colour and texture laid

10.0 8.2 over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse

sand), joints treated with white cement,mixed with matching

pigment, epoxy touch ups, including rubbing, curing,moulding and

polishing to edges to give high gloss finish etc. completeat all

10.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red

8.2.2.1 Area of slab upto 0.50 sqm Sqm 5,413.50

Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high

gloss finish etc.complete as per design approved by Engineer-in-

Extra for fixing marble /granite stone, over and above

corresponding basic item, in facia and drops of width upto 150

mm with epoxy resin based adhesive, including cleaning etc.

Extra for providing opening of required size & shape for wash

basins / kitchens sink in kitchen platform, vanity counters and Each

13.0 8.5 similar location in marble / Granite /stone work including openin 978.80 5.00 4,894.00

necessary holes for pillar taps etc. including moulding, rubbing g

and polishing of cut edges etc. complete.

TOTAL MARBLE & GRANITE WORK 5,59,850.78 4,42,379.78

SH-9 WOOD & PVC WORK

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length (

hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood Cum 1,42,949.70 0.49 69,473.55

Providing and fixing ISI marked flush door shutters conforming to

IS : 2202 (Part I) non-decorative type, core of block board

15.0 9.21 construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Extra for providing lipping with 2nd class teak wood battens 25

16.0 9.23 mm minimum depth on all edges of flush door shutters (over all Sqm 462.35 27.75 12,830.21

area of door shutter to be measured).

Providing and fixing plywood 4 mm thick, one side decorative

veneer conforming to IS: 1328 (type-1), for plain lining / cladding

with necessary screws, including priming coat on unexposed

17.1 8.28.1 Decorative veneer facings of approved manufacture Sqm 1,946.25 55.44 1,07,900.10

Digitally signed by AVDHESH

Repair/Renovation works for Office Building including Interior Works and Services at IFCI Tower,16 th floor, Nehru Place, New Delhi”

BOQ Civil works

S. NO Ref. Description of Item Unit RATE Qty

Providing and fixing wooden moulded beading to door and

18.0 9.40.1 window frames with iron screws, plugs and priming coat on

unexposed surface etc. complete.

Extra for providing ISI marked Stainless Steel butt hinges instead of

19.0 M.S. pressed butt hinges bright finished of required size with Sqm 193.55 34.65 6,706.51

9.14 necessary screws. (Shutter area to be measured).

Providing and fixing aluminium handles, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI

marked, anodised (anodic coating not less than grade AC 10 as per

IS : 1868) transparent or dyed to required colour and shade, with

necessary screws etc. complete.

22.10 9.101.1 Single rubber stopper each 39.60 7.00 277.20

Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISi, IS :

3564, embossed on the body, door weight upto 36 kg to 80 kg and

door width from 701 mm to 1000 mm), with double speed

adjustment with necessary accessories and screws etc. complete.

frame and required board, including providing and fixing of frame

work made of special section power pressed/ roll form G.I. sheet

with zinc coating of 120 gms/sqm(both side inclusive), consisting

of floor and ceiling channel 50mm wide having equal flanges of 32

mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing

of 610 mm centre to centre with dash fastener of 12.5 mm dia

meter 50 mm length or suitable anchor fastener or metal screws

with nylon plugs and the studs 48 mm wide having one flange of

34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing

of 610 mm centre to centre by 6 mm dia bolts and nuts, including

fixing of studs along both ends of partition fixed flush to wall with

suitable anchor fastener or metal screws with nylon plugs at

spacing of 450 mm centre to centre, and fixing of boards to both

side of frame work by 25 mm long dry wall screws on studs, floor

and ceiling channels at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered

to avoid through cracks, M.S. fixing channel of 99 mm width (0.9

mm thick having two flanges of 9.5 mm each) to be provided at

the horizontal joints of two boards, fixed to the studs using metal

75 mm overall thickness partition with 12.5 mm thick double skin

fire rated Glass Reinforced Gypsum (GRG) plaster board

conforming to IS: 2095: part 3 (Board with BIS certification marks)

Providing and fixing Toilet cubical(of following standard dimension

which includes 600mm door size width) made up of thermosetting

resign treated high pressure ,self supporting decorative compact

laminates with permanently incorporate anti-bacterial

agents(under JIS Z2801:2000 certification) during manufacturing

.Compact board should be resistance to water immersion through

26.00 NDSR permissible increase on thickness and mass <0.60% and board Nos 38,434.41 4.00 1,53,737.66

density >1.35kg/cm3 and fulfilled the criteria of green guard gold

certification and manufactured under EN438-2&3:2005 standard.

12mm thick compact board should be Moisture resistant, Impact

resistant, termite resistant ,Scratch resistant ,Weather and

climatic shock resistant.

TOTAL WOOD & PVC WORK 7,82,433.83 1,53,737.66

SH-11 FLOORING WORK

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of the

building all complete as per the architectural drawings with 18 mm

thick stone slab over 20 mm (average) thick base of cement

27.0 mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing

etc. all complete as specified and as directed by the Engineer-in-

27.1 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Digitally signed by AVDHESH

Repair/Renovation works for Office Building including Interior Works and Services at IFCI Tower,16 th floor, Nehru Place, New Delhi”

BOQ Civil works

S. NO Ref. Description of Item Unit RATE Qty

Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on

20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing

28.0 with grey cement slurry @3.3 kg/sqm including grouting the joints

with white cement and matching pigments etc. The tiles must be

cut with the zero chipping diamond cutter only . Laying of tiles will

be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles

11.41A gently and easily

28.1 11.41A.3.1 Glazed Vitrified tiles Matt/Antiskid finish of size 600X600mm Sqm 1,724.40 308.45 5,31,898.31

Providing & fixing in position Phenol bonded Bamboowood

flooring with planks of sizes 14mm thick, minimum 1800mm

length and minimum 100 mm wide, in approved colour, texture

and finish, having Performance Appraisal Certificate (PAC) issued

by Building Materials & Technology Promotion Council (BMTPC).

29.0 26.1 The flooring shall be fixed with tongue and groove interlocking Sqm 6,145.85 34.32 2,10,952.61

system, with underlayment of 4mm thick expanded polyethylene

foam sheets having density 40kg/cum, over prepared surface with

necessary quarter round planks of size 1900mm x 18mm and door

reducer of size 1900mm x 44mm, wherever required. The

bamboowood planks shall have minimum density of 1000 Kg/cum

& minimum Hardness 1000 Kgf. with Eco friendly UV coating, all

complete as per direction of the Engineer in-charge.

Grouting the joints of flooring/wall tiles having joints of 3 mm

width, using epoxy grout mix of 0.70 kg of organic coated filler of

30.0 11.48 desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),

including filling /grouting and finishing complete as per direction

of Engineer-in-charge.

Providing and laying machine cut, mirror polished Marble stone

flooring, in required design (Simple geometrical, abstract etc.) and

in patterns in combination with Italian marble stones of different

colours, shades and finished surface texture etc., in linear portions

of the building, all complete as per the architectural drawings,

with 18 mm thick stone slab laid over 20 mm (average) thick base

31.0 11.52 of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

with white cement slurry @ 4.4 kg/sqm, including pointing with

white cement slurry admixed with pigment to match the marble

shade, including rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire

Red or Dark Emperadore etc.

Providing Nylon Carpet Tiles having density 5300 gm / m2 ,

Carpet tile Printed Nylon type-6 construction face carpet tile with

fiber glass polyvinyl chloride backing. The rate shall be inclusive for

Comfolene, GermiShield, Markproof, ActiBack, Stainarmour,

Nurturefeet, Microbefresh, moist proof and the likes with a total

thickness of 4 mm or as manufacturer’s specification. Carpet tiles

33.0 NDSR shall be complied with Flammability Test ASTM E648 , Sqm 3,599.12 64.13 2,30,806.61

Methenamine Pill Test ASTM D2859, Smoke Density Test ASTM

E662, Appearance Retention Hexapod test ASTM D5252. The laying

work should be carried out by the authorized installer of the

Company in India, all complete as per direction of the Engineer in-

TOTAL FLOORING WORK 11,46,216.26 2,30,806.61

SH-12 ROOFING WORK

Digitally signed by AVDHESH

Repair/Renovation works for Office Building including Interior Works and Services at IFCI Tower,16 th floor, Nehru Place, New Delhi”

BOQ Civil works

S. NO Ref. Description of Item Unit RATE Qty

Providing and fixing at all height false ceiling of 4mm thick phenol

bonded Bamboo Mat board (595x595mm) conforming to IS:13958-

1994 including providing and fixing of frame work made of GI

angle 25x25x0.4 mm thick all around suitably fixed to wall with the

help of dash fastener and hanger frame (600x600 c/c) made GI

slotted Tee having powder coating on bottom side (30x25x0.3 mm

34.0 thick for main member & 25x25x0.3 mm for cross member) Sqm 4,093.10 52.49 2,14,855.01

connected to ceiling with 2.64mm GI wire and anchor fastener at

every junction and also including cost of making openings for light

fittings, grills, diffusers, cut outs made with frame of perimeter

channels suitably fixed all complete as per direction of Engineer-in-

GI Metal Ceiling Lay in perforated Tegular edge global white color

tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made

of GI sheet having galvanizing of 100 gms/sqm (both sides

inclusive) and 20% perforation area with 1.8 mm dia holes and

35.0 having NRC (Noise Reduction Coefficient ) of 0.5, electro statically Sqm 2,068.75 23.43 48,473.87

polyester powder coated of thickness 60 microns (minimum),

including factory painted after bending and perforation, and

backed with a black Glass fiber acoustical fleece.

Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of size 24x38

mm made from 0.30 mm thick (minimum) sheet, spaced at 1200

mm center to center and cross "T" of size 24x25 mm made of 0.30

mm thick (minimum) sheet, 1200 mm long spaced between main

"T" at 600 mm center to center to form a grid of 1200x600 mm

and secondary cross "T" of length 600 mm and size 24x25 mm

made of 0.30 mm thick (minimum) sheet to be interlocked at

middle of the 1200x600 mm panel to form grids of 600x600 mm

and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of

approved texture in the grid including, required cutting/making,

opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc. Main "T" runners to be suspended from

ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to

ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI

adjustable rods with galvanised butterfly level clips of size 85 x 30

x 0.8 mm spaced at 1200 mm center to center along main T,

12.5 mm thick square edge PVC Laminated Gypsum Tile of size

TOTAL ROOFING WORK 9,12,249.68 -

SH-13 FINISHING WORK

Providing and applying plaster of paris putty of 2mm thickness

37.0 13.26 over plastered surface to prepare the surface even and smooth Sqm 262.70 251.97 66,193.20

38.0 13.45 Finishing walls with textured paint of required shade -

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over

38.1 13.45.1 and including priming coat of exterior primer applied @ 2.20kg/10 Sqm 223.60 574.24 1,28,399.97

TOTAL FINISHING WORK 2,30,574.86 -

SH-21 ALUMINIUM WORK

Providing and Fixing Glass Partition with12 MM thick Toughned

39.0 M.R Glass of approved make and all Accessories including fixing on Sqm 6,385.34 190.72 12,17,792.75

floor & wall as per the direction of Engineer-In-Charge

Providing & Fixing premium quality Manually operated Roller

blinds with Solar protection fabric of high tenacity Polyester Yarn

with PVC Coating & Grey Backing, & offer 100% blackout / heat

radiance. Fabric shall have Indoor Air Quality & Children & School

Certified. Weight: 300 to 350 g/m2 (+/-5%), Thickness: 0.47 to 0.55

40.0 M.R mm (+/-5%), Fabric Openness Factor: 0%, Tensile Strength Sqm 4,413.24 109.58 4,83,588.00

(Warp/Weft): 160/170 daN / 5cm, Tearing Strength (Warp/Weft):

11/13 daN, Solar Transmission- 0%, Solar Reflectance 25-69%,

Solar Absorption 28-31%, Fungistatic Treatment: Degree 0,

Excellent (EN ISO 846-A).

Digitally signed by AVDHESH

Repair/Renovation works for Office Building including Interior Works and Services at IFCI Tower,16 th floor, Nehru Place, New Delhi”

BOQ Civil works

S. NO Ref. Description of Item Unit RATE Qty

Providing and fixing Factory Made sensor based automatic sliding

door of 1.8m X2.1 m with openable portion of minimum 5'-0" with

approved make or as suggested by architect with all modern

facilities as/specification .Unique Features: - Stainless Steel

running track for rollers

- Concealed glass clamping with positive hold (Anti-sagging

Other Accessories (Included in supply):

- 1no. Standard Motion Sensor

- 1no. Integrated Motion + Safety sensor

- 1no. 3position program selector switch (AUTO/OPEN/CLOSE)

- 2nos. Standard Floor Guide - suitable for 10mm glass thickness

### Door Parameters:

Max Door Width: 1050mm (including all overlap) x 2panels,

Max Door Height: 2400m (clear passage height)

Max Door Weight: Upto 100Kgs (per door leaf)

Recommended Glass Thickness: 10mm

Suitable for Wall Surface/MS Beam/Glass mounting

Providing and fixing 12mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & double acting hydraulic floor

42.0 spring type fixing arrangement and making necessary holes etc. for Sqm 5325.9 15.94 84,889.52

fixing required door fittings, all complete as per direction of

Engineer in charge (Door handle, lock and stopper etc. to be paid

21.18 separately)

Providing & fixing set of Stainless Steel door handle of 22mm dia

43.0 300mm length, Floor Spring of approved make and specification Each 13510.86 8.00 1,08,086.85

MR for one door

TOTAL ALUMINIUM WORK 84,889.52 21,41,967.79

DISMANTLING AND DEMOLISHING

Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable

15.7.4 In cementwithin

mortar50 metres lead as per direction of Engineer-in- cum 2060.2 2.00 4,120.40

Taking out doors, windows and clerestory window shutters (steel

or wood) including stacking within 50 metres lead :

46.1 15.13.2 Of area beyond 3 sq. metres each 188.9 2.00 377.80

Dismantling steel work manually/ by mechanical means in built up

47.0 15.19 sections without dismembering and stacking within 50 metres lead Kg 3.85 175.00 673.75

as per direction of Engineer-in-charge

Dismantling tile work in floors and roofs laid in cement mortar

including stacking material within 50 metres lead.

48.1 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 73.40 45.00 3,303.00

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed

glazing and false ceiling including disposal of unserviceable

material and stacking of serviceable material with in 50 meters

lead as directed by Engineer-in-charge.

Taking out the Exsisting Furniture and Glass partation and stacking

the same as per Instruction of EIC

REPAIRS TO BUILDING

Repairs to plaster of thickness 12 mm to 20 mm in patches of area

2.5 sq.meters and under, including cutting the patch in proper

shape, raking out joints and preparing and plastering the surface

of the walls complete, including disposal of rubbish to the

dumping ground, all complete as per direction of Engineer-in-

51.1 14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 560.50 250.00 1,40,125.00

TOTAL DISMANTLING & DEMOLITION WORK 1,83,013.18 2,00,000.15

Digitally signed by AVDHESH

Sno DSR Code Item Unit Rate Qty DSR Amount NDSR

PART-B PLUMBING WORKS

A. SANITARY FIXTURES & FITTINGS

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved shape including providing & fixing white vitreous

china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4

litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc.

Providing and fixing Under counter with white glazed vitreous china wash basins with

C.P. brass eurometic self closing pillar tap with flow rate of 3.8 LPM complying to

Green Building, C.P. brass waste and unions and sealing of joints between wash basins

and counter slabs around the wash basins with Silicone rubber cement of approved

make of matching colour all complete including cutting and making good the walls and

floors where required.

Providing and fixing white vitreous china battery based infrared sensor operated

urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250

ml & 500 ml consumption), having water inlet from back side, including fixing to wall

with suitable brackets all as per manufacturers specification and direction of Engineer-

Providing and fixing Urinal Division Plate with table rubbed, edges rounded and

polished, of size 900 x 450 mm, fixed in urinal partitions by cutting a chase of

appropriate width with chase cutter and embedding the stone in the chase with epoxy

grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished

Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of

approved make (to the approval of Engineer-in-charge) complete in all respect as

7 NS approved by Engineer Incharge Each 4843.00 5 24215.0

Providing and fixing of Health faucet with regulator with flexible pipe 1.0 m long, wall

hooked complete as required with flow rate of 3.8 LPM complying to Green Building

requirements. as approved by Engineer Incharge

Providing and fixing of 15 mm dia CP brass 2way bib cock with CP wall flange of

approved quality with flow rate of 3.8 LPM complying to Green Building requirements.

Make : Jaquar Model No COP-041PM or equivalent make.

10 NS Providing and fixing toilet paper holderas approved by Engineer Incharge

C.P. brass Each 775.00 5 3875.0

Providing and fixing of C.P. brass twin coat hook with PVC rawl plug & C.P. brass screw

complete as required. as approved by Engineer Incharge

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

12 NS approved quality conforming to IS:8931 as approved by Engineer Incharge

15 mm nominal bore Each 555.00 5 2775.0

Providing and fixing 450mm Long Braided Hose with Two 15mm Nuts & Rubber

Washers Without Nipple (Suitable for Geysers) as approved by Engineer Incharge

15 mm nominal bore

45 cm length Each 288.00 5 1440.0

Providing and fixing of CP Brass Bath and Shower Mixer with provision of overhead

shower with 115mm long bend pipe, in built spout, spout / shower selector with wall

flange complete with all accessories as required and making good the walls wherever

required. with flow rate of 6.0 LPM complying to Green Building requirements as

approved by Engineer Incharge

Providing and fixing of CP Brass 115mm long Shower Arm with wall flange and

pressure adjustable Shower Rose complete with all accessories as required and

making good the walls wherever required with flow rate of 6.0 LPM complying to

Green Building requirements. as approved by Engineer Incharge

Providing & fixing of ABS plastic body liquid soap dispenser of approved design and

16 NS makeas approved by Engineer Incharge Each 1558.00 3 4674.0

Providing & fixing of C.P. brass Soap Dish holder of approved design and make. Mas

17 NS approved by Engineer Incharge Each 1454.00 3 4362.0

Providing and fixing of C.P. brass Towel ringas approved by Engineer Incharge

Digitally signed by AVDHESH

Plumbing BOQ IST 9

Sno DSR Code Item Unit Rate Qty DSR Amount NDSR

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.

19 17.31 brass screws and washers complete. Each 1607.95 3 4823.85

20 NS Providing and fixing of C.P. brass Towel rail as approved by Engineer Incharge Each 2300.00 1 2300.0

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and

21 17.22A as per the direction of Engineer-in-charge. Each 1034.80 5 5174.00

Digitally signed by AVDHESH

Plumbing BOQ IST 10

Sno DSR Code Item Unit Rate Qty DSR Amount NDSR

Supply of solid state, no touch operating, fully hygienic hand drier of approved shade

with single blower, with time delay, summer & winter control, music while drying,

volume ON/OFF controls complete as required. as approved by Engineer Incharge

Providing and fixing of Storage type water heater/ Geyser with required accessories

like 15 mm CP angle valve on inlet & outlet line, heavy duty reinforced flexible PVC

connector for cold water line and flexible CP brass connector with CP checkout for hot

water line, CPVC line connection, MS bracket with two coats of enamel paint, anchor

fastners etc. to hang the units, providing and fixing of 16 A 3 Pin plug of Anchor make,

etc. complete as required. as approved by Engineer Incharge

20.1 NS Capacity 15 Liters Each 14549.00 1 14549.0

20.2 NS Capacity 25 Liters Each 17207.00 1 17207.0

Total 383975.0

B. WATER SUPPLY (INTERNAL)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of Engineer in

1 18.8 Charge.

Concealed work, including cutting chases and making good the walls etc.

1.1 18.8.2 20 mm nominal outer dia Pipes Metre 537.60 45 24192.00

1.2 18.8.3 25 mm nominal outer dia Pipes Metre 627.25 15 9408.75

1.3 18.8.4 32 mm nominal outer dia Pipes Metre 739.30 15 11089.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes

& fittings with one step CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Internal work - Exposed on wall

2.1 18.7.2 20 mm dia nominal bore Metre 335.00 15 5025.00

2.2 18.7.3 25 mm dia nominal bore Metre 401.55 45 18069.75

2.3 18.7.4 32 mm dia nominal bore Metre 518.75 34 17637.50

2.4 18.7.5 40 mm dia nominal bore Metre 702.95 15 10544.25

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with

3 18.18 plastic floats complete :

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed

Providing and fixing motorized valve including control wiring upto panel & ON/OFF

arrangement and all other accessories required to make the system complete

including control unit to be made of good quality PVC box, as per IP 65 with cable

gland also as per IP 65 and suitable for outdoor installation complete with suitable

wiring. This unit should be suitable to operate solenoid valve, float switch and

consisting of contactors, control transformer, MCB, Potential free contacts for BMS,

indicating lamp for automatic operation of filling OH tank with level to be mentioned

between 70% (low) to 100% (full)

6.1 NS 25mm nominal bore Each 15000.00 2 30000.0

6.2 NS 32mm nominal bore Each 18000.00 2 36000.0

Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not

8 less than 15 Kg/Sq.cm.

C. INTERNAL DRAINAGE (SOIL, WASTE, VENT, RAIN WATER PIPES & FITTINGS)

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent system conforming to IS

: 13592 (Type-B) and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-

tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for

connections to other materials, plugs, reducers, cowls, offset and other specials.

Jointing shall be done with push fit EPDM ring jointing technique in general. Solvent

cement joints may be provided for fittings and specials which are not manufactured

with push fit rubber joints. Fixing at wall/ceiling level supported by galvanized steel

clamps & hangers etc. Making proper connection and also pipes may be laid / fixed in

sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased

with not less than 75 mm thick cement concrete (1:2:4) all around. The installation

shall be complete in all respects including cutting chases / holes in walls, slabs and

making good the same as per specifications. (All major MS structure to hold the stack

is included in this item).

Digitally signed by AVDHESH

Plumbing BOQ IST 11

Sno DSR Code Item Unit Rate Qty DSR Amount NDSR

Providing, jointing, testing and fixing UPVC Rain water system conforming to IS :

13592 (Type -A) and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-

tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for

connections to other materials, plugs, reducers, cowls, offset and other specials.

Jointing shall be done with push fit EPDM ring jointing technique in general. Solvent

cement joints may be provided for fittings and specials which are not manufactured

with push fit rubber joints. Fixing at wall/ceiling level supported by galvanized steel

clamps & hangers etc. Making proper connection and also pipes may be laid / fixed in

sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased

with not less than 75 mm thick cement concrete (1:2:4) all around. The installation

shall be complete in all respects including cutting chases / holes in walls, slabs and

making good the same as per specifications. (All major MS structure to hold the stack

2 is included in this item).

2.1 NS 110 mm dia Type A Metre 560.00 25 14000.0

Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising

UPVC pipe conforming to IS :4985-1983 of class 3 (6kg/cm2) as specified below and

fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail

pieces, caps, suitable elbow with suitable extension piece for drain point and other

specials jointing with cement solvent, chasing, cutting and making good the walls &

floors pipes laid in floors shall be encased with 40 mm thick concrete all around,

complete in all respects including testing of complete installation.(All major MS

structure to hold the stack with fixing including anchor fasteners, sand, cement etc is

3 included in this item)

3.1 NS 40 mm od 6 kg/cm2 (Class III ) Metre 232.00 40 9280.0

3.2 NS 50 mm od 6 kg/cm2 (Class III ) Metre 258.00 30 7740.0

3.2 NS 63 mm od 6 kg/cm2 (Class III ) Metre 304.00 20 6080.0

Providing and fixing UPVC/SWR trap (P trap) of self cleaning design as per IS:13592 :

1992 complete including cost of cutting and making good the cutouts in walls and

floors etc.including cutting and making good the walls and floors wherever required

4.1 NS 110 mm inlet and 110 mm outlet Nos. 323.00 5 1615.0

Providing and fixing floor drain made out of 110x63 mm OD uPVC elbow connected to

5 NS uPVC pipe complete as per direction of Project Manager. Nos. 121.00 7 847.0

Providing and fixing Inlet Fitting for Urinal trap, formed out of 110 mm PVC pipe with

multiple side inlets formed with saddle pieces, suitable for 40, 50 and 63 mm dia side

connections as per standard detail and support through galvanized steel support from

slab or set in cement concrete mix 1:2:4 including cutting and making good the walls

6 NS and floors wherever required. Nos. 176.00 2 352.0

Providing and fixing Heavy Class SS grating of approved design including setting in

floor with cement motor to match with floor finish as per architect requirement

7 NS suitable for waster and FT, UT & FD.

Providing and fixing P.V.C. WC connector (straight or bend type) with rubber lip ring.

Including 110 mm dia PVC pipe / bend of required length and proper connection with

8 NS M seal to C.I. pipe complete as required. Nos. 168.0 5 840.0

9 N.S Dismantling the PIpe and Other acessories of Plumbing As per EIC Jobs 145000.00 1 145000.0

Digitally signed by AVDHESH

Plumbing BOQ IST 12

DSR Ref Description Unit QTY. Unit Rate Unit Rate DSR Amount NDSR Amount

DSR - 2022 Non DSR DSR - 2022 Non DSR

A DISTRIBUTION BOARDS

2.3 Supplying and fixing following way, single pole

and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including

earthing etc. as required. (But without

MCB/RCCB/Isolator)

2.3.3 12 way, Double door Each 2 2315 4630

2.4 Supplying and fixing following way, horizontal

type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

2.4.1 4 Way Double door Each 1 4091 4091

2.5 Supplying and fixing following way, horizontal

type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

2.1 Supplying and fixing 5 amps to 32 amps rating,

240 volts, 'C' series, miniature circuit breaker

suitable for inductive load of following poles in

the existing MCB DB complete with connections,

testing and commissioning etc. as required.

2.10.1 Single pole Each 128 256 32768

2.15 Supplying and fixing following rating, double

pole, (single phase and neutral), 240 V, residual

current circuit breaker (RCCB), having a

sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and

commissioning etc. as required.

2.1 Supplying fixing, 5 A to 32 A rating, 240/415 V

curve , miniature circuit breaker suitable for

load of following poles inth existing MCB DB

with connection, testing and commissioning etc.

2.10.5 Triple pole and neutral Each 1 1228 1228

Digitally signed by AVDHESH

Electrical BOQ IST 13

DSR Ref Description Unit QTY. Unit Rate Unit Rate DSR Amount NDSR Amount

DSR - 2022 Non DSR DSR - 2022 Non DSR

2.2 Providing and fixing following rating and breaking

capicity and pole MCCB with thermomagnetic

release and terminal spreaders in existing cubical

panel board including drilling holes in cubicle

panel, making connections, etc as required.

TOTAL CARRIED TO SUMMERY 141698

MR Supply of XLPE insulated, armoured heavy duty

electric cable with aluminium conductor, 1100

volts grade, cross-sectional area as follows

MR 4 core, 6 Sq.mm. Mtr 20 420.00 8400

MR 2 core, 6 Sq.mm. Mtr 20 210.00 4200

MR 3.5 core 70sq mm Mtr 20 470.00 9400

MR 4 core 16 Sq. mm Mtr 20 472.00 9440

MR Laying and fixing of following sizes of one

number PVC insulated and PVC sheathed/XLPE

Power cable of 1.1kv grade on cable tray as

MR Upto 35 sq. mm(clamped with 1 mm thick saddle)

MR Above 50 sq. mm and upto 95 sq. mm (clamped

with 25/40x3mm MS flat clamp) Mtr 40 281.00 11240

MR Supplying and making end termination with brass

compression gland and aluminium lugs for

following size of PVC insulated and PVC

sheathed / XLPE aluminium conductor cable of

1.1 KV grade as required.

MR 4 core, 6 Sq.mm. Set 10 200.00 2000

MR 2 core, 6 Sq.mm. Set 10 221.00 2210

MR 3.5 core 70sq mm Set 5 291.00 1455

MR 4 core 16 Sq. mm Set 10 290.00 2900

TOTAL CARRIED TO SUMMARY 97840

C HOT DEEP GI CABLE

TRAYS & GI RACEWAYS

4.6 Supplying and installing following size of

perforated Hot Dipped Galvanised Iron cable

tray (galvanisation thickness not less than 50

microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors,

suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness

4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness

TOTAL CARRIED TO SUMMARY 167900

Digitally signed by AVDHESH

Electrical BOQ IST 14

DSR Ref Description Unit QTY. Unit Rate Unit Rate DSR Amount NDSR Amount

DSR - 2022 Non DSR DSR - 2022 Non DSR

5.14 Providing and fixing 25 mm X 5 mm copper strip

on surface or in recess for connections etc. as

required. Meter 100 1162 97200

5.15 Providing & fixing of 25mm x 5mm GI strip on

surface or recess for earth connection as

required. Meter 10 244 2440

5.16 Providing and fixing 6 SWG dia G.I. wire on surface orMeter

in recess for10

loop earthing70

as required. 700

TOTAL CARRIED TO SUMMERY 100340

E INTERNAL WIRING:

1.1 Wiring for light point/ fan point/ exhaust fan

point/ call bell point/normal switch with 1.5

sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed FRLS PVC

conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

1.5 Wiring for light/ power plug with 2X4 sq. mm FRLS

PVC insulated copper conductor single core

cable in surface/ recessed steel conduit

alongwith 1 No. 4 sq. mm FRLS PVC insulated

copper conductor single core cable for loop

earthing as required. meter 500 433 216500

1.7 Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FRLS PVC insulated

copper conductor, single core cable in surface/

recessed PVC FRLS conduit as required.

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire meter 200 369 73800

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire meter 150 589 88350

1.31 Supplying and fixing suitable size GI box with

modular plate and cover in front on surface

or in recess, including providing and fixing 3 pin

5/6 A modular socket outlet and 5/6 A

modular switch, connections etc. as required.

1.32 Supplying and fixing suitable size GI box with

modular plate and cover in front on surface or in

recess, including providing and fixing 6 pin 5/6 A

& 15/16 A modular socket outlet and 15/16 A

modular switch, connections etc. as required.

TOTAL CARRIED TO SUMMERY 659568

F LIGHTING FIXTURE AND FANS

Digitally signed by AVDHESH

Electrical BOQ IST 15

DSR Ref Description Unit QTY. Unit Rate Unit Rate DSR Amount NDSR Amount

DSR - 2022 Non DSR DSR - 2022 Non DSR

MR Supply, Installation, testing and commissioning of

following type Fluorescent/ Compact

fluorescent/LED light fixtures on wall/ Ceiling

including all fixing accessories such as leads, etc

complete as required. The Fluorescent /CFL

fixtures shall be complete with Low loss copper

ballast PF improvement capacitor, Bipin Rotor

type lamp holder, starter, starter base, all pre

wired upto the terminal block. All fixtures shall be

supplied with lamps.

MR SITC of12W recess type LED downlighter neutral

white (4000K) with LED having pressure die cast

aluminium hang body having high efficiency

diffuser with more than 85% transmittance with

rated life of L-70 @50000 hrs having system lumen

output better than 1440 lumens and efficacy

better than 120 lumen/ watt(fixture design for

meeting LG-7 Guideline) with CRI>80, Reverse

Polarity and Surge Protection upto 3 kV & Driver

efficiency> 90%,PF>0.98,THD<5% (Driver

compliance IEC 62384,IEC 61547,IEC 61347-2-

13,EMI-CISPR15) etc.

MR Supplying, Installation, Testing and Commissioning

of surface mounting 30W Rating of Recess type

LED Luminaire/System Wattage/Rated Power

Type of fixture (in feet)

LED chip Efficacy (>/=130 Lm/Watt for 6000 deg

K, >/=120 Lm/Watt for 4000 deg K, >/=110

Lm/Watt for 3000 deg K)

Supply of LED 24W 2550 Lumens 4000K Recessed Downlight 38 3110.00 118180

4 SITC of18W recess type LED downlighter neutral

white (4000K) with LED having pressure die cast

aluminium hang body having high efficiency

diffuser with more than 85% transmittance with

rated life of L-70 @50000 hrs having system lumen

output better than 1800 lumens and efficacy

better than 120 lumen/ watt(fixture design for

meeting LG-7 Guideline) with CRI>80, Reverse

Polarity and Surge Protection upto 3 kV & Driver

efficiency> 90%,PF>0.98,THD<5% (Driver

compliance IEC 62384,IEC 61547,IEC 61347-2-

13,EMI-CISPR15) etc.

TOTAL CARRIED TO SUMMARY 213151

G UPS/Inverter System

MR 60 KVA, 3PH:3PH Nos

ONLINE UPS 3/3 PHASE WITH INBUILT 459330.00 459330

ISOLATION TRANSFORMER 1

MR BATTERY 100AH-12V Nos

Backup time: Approx 30 Mins. 35

H Trivector Meter Set

MR accuracy as per relevant IS and IEC Standards

Digitally signed by AVDHESH

Electrical BOQ IST 16

DSR Ref Description Unit QTY. Unit Rate Unit Rate DSR Amount NDSR Amount

DSR - 2022 Non DSR DSR - 2022 Non DSR

Digitally signed by AVDHESH

Electrical BOQ IST 17

DSR REF Description Unit QTY. DSR Rate MR Rate MR Amount

A DATA , VOICE & Wi-Fi SYSTEMS

MR Supplying and fixing following modular switch/ socket on the

existing modular plate & switch box including connections

but excluding modular plate etc. as required.

MR Telephone socket outlet Each 13 520.00 6760

MR DATA/Wi-Fi socket outlet Each 112 1033.00 115696

MR Supplying and fixing following size/ modules, GI box

alongwith modular base & cover plate for modular switches

in recess etc. as required.

MR 1 or 2 Module (75 mmX75 mm) Each 125 507.00 63375

MR Supplying and fixing following Modular base & cover plate

on existing modular metal boxes etc. as required.

MR 1 or 2 Module Each 125 415.00 51875

MR Supplying and drawing of UTP 4 pair CAT 6 LAN Cable as per

EIA in the existing surface/ recessed Steel/PVC Conduit as

MR Supplying and fixing of following sizes of steel conduit along

with accessories in surface/recess including painting in case

TOTAL CARRIED TO SUMMERY 0 452366

Digitally signed by AVDHESH

LV electrical IST 18

Sr. No. Particulars Unit Make Qty. Rate (Rs.) (Rs.) MR Amount

A HVAC Works S/I/T/C S/I/T/C

16.5 Supplying, laying,fixing, testing and commissioning of

following thickness closed cell elastrometric nitrile

rubber of class ‘O’ applied by adhesive confirming to

standard specifications, as per specifications and as

required complete in all respect.

16.5.2 Insulation with nitrile rubber of thickness 19mm on Rmtr.

existing pipe Rajco or Equi 145 665 96,425

M.R SITC of Control & Transmission Wire in 20 mm dia Rmtr.

Duty PVC Conduit pipe with fittings as per

specification Polycab 135 155.00 20925

M.R SITC of one number PVC insulated, PVC sheathed

and XLPE insulated armoured, Multicore Copper

Conductor, power cable of 1.1 kV grade as per IS

7098 (Part 1) 1988 of sizes as per below laid on cable

tray as required. (Pricing of cable tray included)

M.R 4C X 6 sqmm Armoured Rmtr. Polycab 75 753.00 56475

M.R 4C X 10 sqmm Armoured Rmtr. Polycab 64 371.00 23744

M.R Flexible Copper Earthing Wire 6.0 Sqmm Rmtr. Polycab 128 260.00 33280

M.R SITC of RCCB/ELCB enclosed in Weatherproof Box.

The Capacites are as follows; 0

Supply, installation, balancing and commissioning of

factory fabricated GSS sheet metal rectangular/round

ducting complete with neoprene rubber gaskets,

elbows, splitter dampers, vanes, hangers, supports

etc. as per approved drawings and specifications of

following sheet thickness complete as required.

16.12.1 Thickness 0.80 mm sheet Sq.m 145 1,263 1,83,135

16.13 Supply, installation, testing and commissioning of GI Sq.m

volume control duct damper complete with neoprene

rubber gaskets, nuts, bolts, screws linkages, flanges

etc, as per specifications. 4 7,046 28,184

16.15 Supplying & fixing of powder coated extruded Sq.m

aluminium Supply Air Grills with aluminium volume

control dampers as per specifications. 23 9,105 2,09,415

16.16 Supplying & fixing of powder coated extruded Sq.m

aluminium Return Air Grills with louvers but without

volume control dampers complete as required. 22 5,910 1,30,020

16.17 Supplying, fixing testing commissioning of Supply air Sq.m

diffusers of powder coated aluminium with aluminium

volume control dampers with anti smudge ring &

removable core. 7 12,184 85,288

16.18 Supplying, fixing testing commissioning of Return air Sq.m

diffusers of powder coated aluminium without volume

control dampers with anti smudge ring & removable

M.R Supplying, Fixing,testing and commissioning of Fresh

Air / Exhaust Louver with Birdscreen Sq.m 2 6,000 12000

16.23.1 Supplying and fixing of following thickness duly

laminated aluminum foil of mat finish closed cell Nitrile

rubber/XLPE insulation on existing duct after applying

suitable adhesive for Nitrile rubber.

Digitally signed by AVDHESH

H.V.A.C IST 19

Sr. No. Particulars Unit Make Qty. Rate (Rs.) (Rs.) MR Amount

16.21 Supply and fixing of acoustic lining of supply air duct

and plenum with 25 mm thick resin bonded glass wool

having density of 32 kg/m³, with 25 mm X 25 mm GI

section of 1.25 mm thick, at 600 mm centre to centre

covered with Reinforced Plastic tissue paper and 0.5 Sq.m 145 708 1,02,660

mm thick perforated aluminum sheet fixed to inside

surface of ducts with cadmium plated nuts, bolts, stick

pins, CPRX compound etc. complete as required and

as per specifications.

Digitally signed by AVDHESH

H.V.A.C IST 20

Sl. DSR DESCRIPTION UNIT QTY. RATE DSR NDSR

No. Item AMOUNT AMOUNT

SUBHEAD-I: PIPING VALVE & ACCESSORIES

1 17.1.2 Supply, installation, testing and commissioning

of Smock Detector with Builin LED and

Mounting base Complete in all Connection etc

as Required Each 1 1153 1,153.00

2 M.R Supply, installation, testing and commissioning

of addressable– automatic dual LED smoke

detector with two integrated light-scattering

smoke sensors using LEDs with different

colors/wavelengths (blue/infrared) to avoid

false alarm & should comply to test fire 1,

Inbuilt Isolator, automatic addressing shall be

UL/EN54 certified

3 DSR-18.7 Providing, laying, testing & commissioning

of 'C' class heavy duty MS pipe conforming

to IS 3589/IS 1239 including Welding,

fittings like elbows, tees, flanges, tapers,

nuts bolts, gaskets etc. and fixing the pipe

on the wall/ceiling with suitable

clamp/support frame and painting with

two or more coats of synthetic enamel paint

of required shade complete as required :

4 DSR- Supplying, fixing, testing and

18.11 commissioning of butterfly valve PN 1.6,

with Bronze/Gunmetal seat duly ISI

marked complete with Nuts, Bolts, washers,

gaskets, confirming to IS 13095, of

following sizes as

5 DSR- Providing, installation, testing and

18.15 commissioning Stainless steel strainer

fabricated out of 1.6 mm thick stainless

steel sheet with 3 mm dia holes with

stainless steel flange

6 DSR- Providing, installation, testing and

18.14 commissioning of dual plate non- return

valve of following sizes confirming to IS

5312 complete with rubber gasket, GI bolts,

nuts, washers etc. as required.

a 18.14.5 100 mm nominal bore Each 1 11050 11,050.00

Digitally signed by AVDHESH

Sl. DSR DESCRIPTION UNIT QTY. RATE DSR NDSR

No. Item AMOUNT AMOUNT

7 NS Providing, Installation, Testing and

Commissioning of Gun Metal / Bronze Ball

Valves screwed ends of following sizes as

8 NS Providing and fixing single acting air valve

with screwed inlet 25 mm dia. Each 2 1,211.00 2,422.00

SUBHEAD- III : FIRE EXTINGUSHER

Providing and fixing of carbon-di-oxide type

fire extinguishers consisting of welded M.S.

cylinderical body, squeeze lever discharge

valve fitted with pressure indicating guase

ingernal discharge tube 30 cms long high

pressure discharge hose, discharge nozzle,

suspension bracket conforming ro IS:15683

finished externally with re enamel paint

and fixed to wall with brackets complete

with internal charge.

Providing and fixing ABC Powder type fire

extinguishers consisting of welded M.S.

cylinderical body, squeeze lever discharge

valve fitted with pressure indicating guase

internal discharge tube 30 cms long high

pressure discharge hose, discharge nozzle,

suspension bracket conforming to IS:15683

finished externally with re enamel paint

and fixed to wall with brackets complete

with inernal charge.

Providing and fixing of ISI marked (IS: 940)

portable chemical fire extinguisher, water

(gas pressure) type capacity 9 litres with

gun metal cap and nozzle and complete in

all respects including initial fill and wall

suspension brackets as required as oer

3 NS soecifications.

TOTAL 0 82226

Digitally signed by AVDHESH