TN-02/EE/2025-26 Repair and painting work of VRB located at Km 90.615, 93.060, 94.990, 96.733, 98.180, 99.810 and fall located at Km 90.600, 96.540 of Anupshahar branch. Lot No-04

Providing & laying 1st class (M-150) brick work with 1:4 cement mortar using cement and coarse snad including cost of all material, T&P & labours per CuM.

Providing Cement pointing (Struck Deep) on brick masonary in 1:3 Cement Mortar including cost of all material, T&P and labour per SqM.

Finishing wall with weather coat by premium acrylic exterior paint applied @ 3.28 ltr/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

Painting and printing letters upto 30cm hight including supply all material labour T&P etc. required for proper complition of work.

Providing & laying C.C. 1:1.5:3 with cement, coarse sand & aggregate (25mm to 10mm) i/c all cost of material, labour T&P etc complete (Per CuM.)

Supplying & Laying Boulder Stone(40 to 70 kg) in Launching apron per Cum

Greasing oiling of component of lifting mechanism of gates (excluding rollers) after proper cleaning with replacing Grease cup/Grease Nipple as required including cost of all material, labour and T&P etc. required proper completion of work.

Replacing of bottom rubber seal as per IS code 11855 by removing old damaged side rubber seal from gate, scrapping and cleaning surface, making holes, fixing and clamping the M.S plate by new counters sunk head high tensile bolts , nuts and washer, making adjust ment as per requirement of site including cost of all material, labour and T&P required for proper completion of work. for size 80x20 mm.

Painting of gates and appurtenances by applying 1 coat of red oxide zinc chromate primer and 2 coat of high build black bituminous paint of standard make after proper cleaning.scrapping the surface including cost of material, all material, labour T&P and scaffolding bridges with proper safety arrangement as required for proper completion of work.