Extension of veranda to maintain single lock system in B-Type and C-Type quarters at Nangal Township.

Amount

Civil Items

Dismantling brick work tile masonry or tile lining in Cement (CSR Item No. 8.5(b) )

Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base. (CSR Item No. 8.17)

Dismantling concrete or precast concrete. (e) Reinforced cement concrete (CSR Item No. 8.6 (e))

Earth work in excavation in foundations, trenches etc.in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (CSR Item No. 6.6)

Cement concrete 1:6:12 (b) With stone aggregates 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type (CSR Item No. 10.8 (b) (ii))

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. (CSR Item No. 11.3(i))

Damp proof course 4 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded. (CSR Item No. 10.26)

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level (CSR Item No. 11.4(i))

RCC M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (CSR Item No. 10.20)

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete (CSR Item No. 18.18)

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels (CSR Item No. 9.6)

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (CSR Item No. 9.8)

Terracing consisting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean afterwire brushing etc. (CSR Item No. 13.13 (i))

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. (CSR Item No. 13.55)

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. (CSR Item No. 13.45)

20mm thick cement plaster 1:5 in two coats work (CSR Item No. 15.21)

12.5 mm thick cement plaster 1:5 (CSR Item No. 15.10)

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Design ishomogenous throughout the tile body .(a)Size 600x600mm (CSR Item No. 14.113 (a) )

Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete . (CSR Item No. 14.122)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR Item No. 14.126)

Marble stone flooring with 12-15 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (v) Udaipur green marble Marble Tiles of various sizes 12mm to 15 mm thick (b) Slabs sizes above 0.50 sqm. (CSR Item No. 14.74 (iv) (b))

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter (CSR Item No. 18.24( C))

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position Code : II Revision IS-2191 Part-I) 1973Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-(i)35mm thick (CSR Item No. 17.27(a) (iv))

Kail wood doors shutter and windows panelled glazed or panelled including Iron hinger, screws etc. complete fixed in position (excluding cost of tower bolts and handles but including labour for fittings the same) (Single Leaf) (a) 35 mm thick (CSR Item No. 17.17 (i)(b))

Wire gauze doors shutter with kail wood without springs housed in chowkats (Single Leaf) 35mm thick (CSR Item No. 17.17 (ii)(a))

Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete(b) Iron Helical spary. (CSR Item No. 17.41 (b))

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm (CSR Item No. 17.23 (ii))

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250mmx 16mm (CSR Item No. 17.49 (B))

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc. (CSR Item No. 16.16)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (CSR Item No. 16.17)

Scraping of Cement plaster (CSR Item No. 8.31 c )

Nicking cement concrete surface (Over 28 days old including preparation and laying slurry). (CSR Item No. 10.31)

Providing and fixing on wall face un- plasticised Rigid PVC rain water pipes Single socketed pipes. (working pressure 4.00 kgf / cm²) conforming to IS : 4985, including fixing with MS clamps (i) Single socketed pipes. U-PVC pipes (working pressure 4.00 kgf. / sqcm) Single socketed pipe 110 mm dia (CSR Item No. 13.74 (a) i)

Providing and fixing 110 mm dia U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.(a) UPVC 110 mm bend. (CSR Item No. 13.75(a))

Carriage of material (Earth, Surkhi. Sand, Earth, Fly Ash. Bajri. Ballast. Stone Boulders. Kankar and Building Rubbish, Earth)including loading and unloading (metaled roads)With lead up to 1.00 km (CSR Item No. 5.2(i) & 4.1(B))

Cutting chase in brick wall in cement or in floor for embedding GI or CI pipe line and making good the same to its original condition. 150mmx150mm (CSR Item No. 30.85 (b))

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I. pipes line and making good the same to its original condition. Size 75mm x 75mm (CSR Item No. 30.85 (a))

Scraping e) bricks dismantled from brick work in line or concrete (CSR Item No. 8.31 e)

WATER SUPPLY ITEM

Dismantling, disjointing, removal of G.I. Pipe lines, specials, valves and fittings complete in all respects. (a) 15mm internal diameter pipe line (CSR Item No. 28.63 (a))

Cutting hole up to 23cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same and finishing according to existing finish where required.(b) Through wall 45.72cm thick (CSR Item No. 28.56 (d))

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I. pipes line and making good the same to its original condition. Size 75mm x 75mm (CSR Item No. 30.85 (a))

Providing, laying, jointing, fixing and testing ISI marked GI pipe (as per IS 1239)B-class premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc) painting with anti-corrosive bitumastic paint, testing, cutting, threading inside building complete. (a) 15mm i/d (CSR Item No. 28.35 (a) )

Providing, fixing and jointing GI Union couplings (of approved make with the approval EIC) as per IS: 1879 in G.I. pipe line complete in all respects. (CSR Item No. 28.40 (a))

Dismantling sanitary fixtures such as European/Indian/Orissa W.C., PVC/ China ware cistern, Wash hand basin, Urinal Pot, Sinks and CP fittings and disposal of dismantled material within a distance of 100 mtr. complete in all respect as required by EIC.a) Indian/Orissa W.C. CSR item No 30.88 (a) (CSR Item No. 30.88(a))

Dismantling sanitary fixtures such as European/Indian/Orissa W.C., PVC/ China ware cistern, Wash hand basin, Urinal Pot, Sinks and CP fittings and disposal of dismantled material within a distance of 100 mtr. complete in all respect as required by EIC. b) PVC/China Ware Cistern (CSR Item No. 30.88 (b))

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. (CSR Item No. 30.2)

Providing and fixing in position stop cock/ angle valve of approved make (to the approval of the Engineer-in-charge) complete in all respect. CP brass 15 mm angle valve without flange CSR item No. 30.66 (c) (CSR Item No. 30.66 (c))

Providing & fixing in position 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respects. CSR item No. 30.65 (b) CP brass Bib cock foam flow without flange. (CSR Item No. 30.65(A)(ii))

Providing and fixing in position stop cock/ angle valve of approved make (to the approval of the Engineer-in-charge) complete in all respect. CP brass 15 mm concealed stop cock with flange CSR Item 30.66 (b) (CSR Item No. 30.66 (b ))

Providing & fixing in position CP brass overhead shower 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of the Engineer-in-charge) complete in all respect. (CSR Item No. 30.56 (A))

Providing & fixing in position best Indian make PVC flexible tube connection. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut CSR 30.72 (b) (CSR Item No. 30.72 (b))

P&F in position S.S. grating with frame of approved make (to the approval of Engineer-in –Charge) complete in all respect) (CSR Item No. 30.80)

ELECTRICAL ITEM

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm,1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc.,complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring light point (CSR Item No. 34.02(ii))

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm,1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc.,complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point with sheet metal fan box (CSR Item No. 34.02(i) b)

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm,1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc.,complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 6 Amp. wall socket point (CSR Item No. 34.02(iv) )

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm,1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc.,complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 16/20 amp power plug control (shuttered) and switch. (CSR Item No. 34.02 (vi))

PVC INSULATED FR COPPER CONDUCTOR CABLES Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm toIS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4 sq.mm, (Un-sheathed) (CSR Item No. 34.0IV)

PVC INSULATED FR COPPER CONDUCTOR CABLES Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm toIS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5 sq.mm, (Un-sheathed) (CSR Item No. 34.09 III)

NON-SCHEDULE ITEM

Removing and re-fixing of doors (AOR)

Racking of joints in lime or cement, mortar and preparing the surface for repointing or re-plastering including disposal of rubbish to the dumping ground within 50m lead (excluding the cost of scraping of plaster and re-plastering). (AOR)

Preparation of existing un-plastered brick surface for cement plaster including scraping/removing of white wash, color wash, snowcem and removing/working of mortar dust etc. (excluding labour for racking out joints which shall be paid for separately wherever required) (AOR)

Providing and fixing J-hook. (MR)

Bidder Name

Amount in Words

ANMOL KATYAL CONTRACTOR

VINOD KUMAR SHARMA

SUBASH CHAND

SUDHIR ANAND

SUBASH CHAND

VINOD KUMAR SHARMA

SUDHIR ANAND