NIT NO. 101/Durg(Bemetara)/2026

Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.

Taking out door shutters (steel or wood) including stacking within 50 metres lead

Taking out window shutters (steel or wood) including stacking within 50 metres lead.

Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base.

Dismantling bricks laid flat or on edge (each layer), or cement concrete tiles in flooring or over roofs in cement/lime mortar iuding stacking of serviceable material and disposal of unserviceable material within 50 metre lead.

Cement concrete ement : 2 coarse and4graded stone ggregate 20 mm nominal size)

Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. 12.9.1) Size 300x300mm

Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 9.16.2) Angle-iron frames

Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. 12.7.2) Size above 200x300mm

Cement mortar 1:3 (1 cement : 3 fine sand).

8.14 Providing and fixing flush door shutters, core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering on one face and commercial ply veneering on the other face of the shutter with vertical grains, cross bands and face veneering excluding hinges. 8.14.2 35 mm. thick (single leaf)

Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 8.60.1) 300x16mm

Providing and fixing brass door latch with brass polished MS screws complete: 8.61.1) 300x16x5 mm

Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 8.62.1) 250x10mm

Providing and fixing antique/ SS finished brass butt hinges with antique/SS polished MS screw complete: 8.77.3) 75x65x4.00 mm (Heavy Type)

Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion & brass polished MS screws etc complete to suit the shutter thickness.

Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : 18.17.1) White Size 550x450 mm

Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. 18.7.1) White

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 19.6.1) 15 mm nominal outer dia pipes

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: 19.14.1) Bib cock (400 grams)

Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required: 18.2.3) White Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.4.1) White pedestal type

Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : 17.1.1) Thickness upto 15mm

Renewal includinq scraping with white washings Colourwashing Cth lime to give an even shade in twn coats on existing lime surface consumption of lime 2.50kg /10 Sqm as per relevant I S. code 6278 1971 . with all tools tackles and labour etc. complete for the work.

Providing and applying for renewing the existing putty/paint surface with white cement based polymeric exterior grade putty for one or more coats applied @ 1.50 kg/ 105 qm as per relevant I.S. code 17545:2021 Product such as Birla wall care, Asian trucare; 5K wall putty, Berger Bison wall putty) to make the surface smooth and even with all tools tackles and labour etc. complete for the work.

Providing arid applying for renewing on existing paint surface water proofing cement paint as per relevant I.S. code 5410:2O 13 of required shade (product such as Snowcem plus,J.K.Shri Cement paints,century cement Paints,Apex paints,Maxcoat Cement Paints ) with all tools tackles and labour etc. complete for the work .two coats applied @ 1 . 5kg/10 sqm up to required finish

Provihinq and oppù'*s rcncivng with Synthnfic oil bound wnshnble Distcmpcr linving VOC content Icss than 5 smx/ lit. rim per relevant I.S. Code 428:200O (product such s Asian Trnctcir synthetic distempcr , Bcrt;cr Disori Lite , I>**1ux A 1 OO , l3irln Opus Style super smnrt) inc lusivc of providii'tt nl*rci lopc on cdgcs und artie le and clearing où door. *viiidusvs, floor und surfncc os requircd with nil tools tuck les und lnbour ctc. corriplcic for flic svork.Tive ccinl s up to finol finisli to give nn even shnde applied 0.75 kg / 1 0 Sqiri Tive ccinl s up to finol finisli to give nn even shnde applied 0.75 kg / 1 0 Sqiri

Provinding and applying for renewing Acrylic washable Distctnper or lits cconomy Plostic cmulsion paint having VOC content less tlinn 50 ms/ lit as pcr rclcvant I.S. Code 428:200O (product such os Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Styled lite economy emulsion product such us Asian Tnctor Spark ,Dulux Pomisc sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Supcrio.) inclusive of providing abro tape on edges end article and cleaninfi of door, windows, floor and surface os required xvith all tools trickles and labour etc. complete for the work.Tsvo coats up to finnl finish applied O.750Kg/ I 0Sqm

Providing and applying r«r renewing Economy Plasticemulsion paint with roller application as per relevant I.S. Code 15489:20 13 Type -1 Class D & C (Glossy and Semi CiIossy finish) o£ required shade (product such as Tractor emulsion , Dulux Promise, Nerolac Bueaty Silver, Berser bisor»'breeze , Opus 130/ Style Paint) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required svith all tools tackles and labour etc. complete for the work.Two coats applied 0.85 lit / 10 Sqm up to finnl finish

Providing arid appl y' s *•• rcncxvi s ith Premium plasticemulsion paint with roller application as per relevant l.s. Code 15489:2013 Type -1 Class D & C ( Ci1ossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium .Dulux Super Cover, Berger Easy Clean ,lsfippon Breezes Metex Gold, Opus I-50 / Calista) inclusive of providing abro tape on edges and article and cleaning of door. windows, flOOr and surface as required with all tools tackles and labour etc. complete for the svork.Two coats applied 0.75 lit / 1OSqm up to inal finish

Providing und applying for rencxxuns Luxury plastic cmul sion paint xsñtli ro 1lcr upplicnt ion as pcr relevant I.S. Code I 54S9:2013 Typc - I Class D , C , B & A (Gloss›'/Scnii Glossy and J'vlatt ,Egg Shell or Sat in Mini sit) of required shade (Product such its Asian Royalc Sliyne. Dulux fi’elx’ct Touch, Burger Si lk Lux ury Eryu0si on ,N ippori Empressi on Pearl . Opus Pure Hi1e P=anCe) inc 1usi ve or proc'idirig abro tape on edges and article and cleaning of door, xx'indoxvs. floor and surface as rcquired with all tools tackles and labour etc. complete for the work.two coats applied O.75 lit /1 0Sgilt up to final finish

Providing and appl ying on renewing on exterior surface Lite Econom ›' Exterior Errrulsion paint r rectuired shades to give protective and water proof finish as per relevant I.S. Code 154S9 -2013 Type •2 Class D , C (Glossy/Senii GIoss3' finish) (Product such as Asian ACE Spark ,Dulu.x Pomi se exterior smart , Nerolac Litli1 Master, Berger Bison Lite, Nippon Superio etc) inclusive of providing abro tape on edses and article and cleaning of door, windows,noor and surface as required with all tools tackles and labour etc. complete for the worL.two coats applied O.75 lit /1 0Sgilt up to final finish

Providing and applying for rene ns on exterior surface with Economy Exterior Ernulsi on paint of required shades to give protective and xvater proof finish as per relevant I.S. Code 15489 2013 Type -2 Class D , C ( Glossy /Semi Glossy finish) (Product such as Asian Ace ,Dulux Promise Exterior , Berger Wall Masta ,Kerolac Surakshn PlusNippon Shogun, Opus One Style Poxver Bright) inclusive of providing abro tape on edges and article amd cleaning of door, xvindoxvs, floor and surface as required with all tools tackles and labour etc. complete for the xvork. two coats applied O.75 lit /1 0Sgilt up to final finish

Providing and applying for renewing on exterior surface with PREM UJ M Exterior emulsion paint of required shade to give protective and svater proof ftnish as per relevant_ I.S Code 1 54fi9-2013 Type -2 Class D , C (Glossy /Semi Glossy finish) (Product such as Asian Apex ,Dulux Weather Sliield Prima E900, Berger Wenthercoat Antidust ,Nerolac Ever las Excel ,Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and «trace as required with all tools tackles and labour etc. complete for the work. two coats applied O.75 lit /1 0Sgilt up to final finish

Providing and applying for rcncxviiag cxtcrior surfacc with PREM lkJM II EAV Y DNI TY Glossy or Matj 1+ i n is li _ (_crior emulsion paint of rcquircd shade to givc protcc:tÍVC DUU water proof finish as per rclcvant 1.S Codi: 1 54P9:20 13 Type -2 Class D , C , B & A (Glossy / matt / Egg S hel1 finish) having liish DrT and silicon aditive for clastomaric property (r oduct such as Asian Ultinaa ,Dulux Weathershield NJltraclean , BerSer Wcatliercoat all Guard , Nerolac Excel Total , Nippon Durafrcsli Expert , Oj9US Tru Look) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surfacc required with all tools tackles and labour etc. complete n work.Two coats applied (ii) O 75 lit / 1USqm up to final finish

Providing and applying renewing satin/ matt finish Enamel paint one coats in all surface applying 0.75 lit/ 1O Sqm up to required finish as per relevent I S code 2932- 20 13 of (Product such as Asian satin Enamel, Dulux Promise Premium marcel , Nerolac Synlhatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc.complete for the work.

Providing and applying renewing glossy finish Enamel paint one coats in all surface applying 0.75 1it/ 1O Sqm up to required finish as per referent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel , Dulux Promise Premium Enamel , Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleanirig of door, windows, floor and surface as required with all . tools tackle and labour etc.complete for the work.

Providing and applying reriewins exterior floor surface with PRHMIkIM HEAVY DkITY ACRYL IC exterior emulsion paint of required shade of one coats applied @ 0.75 1it / 10Sqm up to final finish as per relevant I S Code 15489 2013 (Product such as Asian Apex Floor Ciuar‹3 ,Dulux Floorplus , Berger Weathercoat Floor Protector , Indigo platiuin Series) with all tools tackles and labour etc.complete for work.

Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.

Removing of paint nu internal plastic emulsion/enamel paint by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc.complete.

Removing of paint on external surface exterior emulsion/cement paint by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete at all height.

Providing and applying NR SC H S PRIT POLISH on cx isti rig polished wood work including removing the polish and prcpiirins the surmcc by rubbing down smooth with sancl papcrs, covcri rig the knots, if visible, apply ins C t o I’ xvood fi llcr, c1c.ini ng tlie surface, appl ying vnri ous(nai ni mum 2 coal s) o1’ French spirit polisli till the surface tiivcs liigis gloss i nc 1usive o I providing abro tape on edges and nrtic le and clcani rig o1’ adjuccnt surm«e with all tools, tackles and labour etc. cornpl etc the work.

Providing and applying ready to apply POLYURETHANE MODIFIED WOOD VIII SIP on existing polish surface incInd ing removing the old polish and applying with spray iiincliinc after prepari=s S» f«ce by rubbing down smooth with sand paper no.180. this should be followed by smooth srindi s with send paper no320 or 400. wipe the surface to clean off loose dust particles for secong coat applied 0.05L/Sqm (product such as Asian Paints TouchWood, Dulux sadoline interior, Berger wood keeper IKPU ) inclusive of providing abro tape on edges and article and cleaning of adjucent surface with all tools, tackles and labour etc. complete r r the work.

Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 1.1.1) In all types of soils.

Extra for every additional lift of 1.5 m or part thereof. 1.6.1) All types of soils

Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.2.1) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: 3.12.1) Thermo-Mechanically treated bars FE 415

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: 2.1.2) Wall of any thickness including attached pilasters, buttresses etc. in super structure.

Providing and making 12mm thick cement plaster of mix: 11.2.4) In Cement Mortar 1:6 (1 cement : 6 fine sand)

Neat Cement punning.

Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 18.77.1) Tee/ Tee with door/ Bend 45°/ Bend 90°

TOTAL

Quantity