ADDN/ALTN TO CIVILIAN MARRIED ACCN AT AF STATION YELAHANKA AND PROVISION OF INTERLOCKING TILES FOR SMQ AREA AT AFS YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0 kg of cement per sq. metre all as directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) or laying floor finishes complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs pillar window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding to edges of granite slab of cooking platform over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as directed.

M&L 75 mm thick cement concrete type B-2,1:2:4 (40 mm graded stone aggregate) for plinth protection including use and waste of form work/screed strips and to divide the area in panels complete all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ thickness of concrete slab 100 mm all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as directed.

Demoliion of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as directed,

M&L for brick work with sub class 'B' old size bricks , straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks , straight or curved on plan to any radius built in cement mortar 1:4 in half brick thick complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement on internal surfaces of walls complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement on external surfaces of walls complete all as specified and directed.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble masonry complete all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coat of oil bound distemper over a coat of interior wall care putty 3mm thick complete all as specified and as directed

M&L for Preparation of newly plastered wall surfaces and applying two coats of cement base paint on walls including priming the surfaces with alkali resistant priming paint etc complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying three coat of White wash all as specified and directed.

M&L for preparation of old decorated wall surface and applying two coat of white wash all as specified and directed.

M&L for preparation old painted wooden surface of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel surface of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel complete all as specified and directed.

M&L for complete removal of existing treatment on the old surfaces of wall and applying two coat of cement base paint ,complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

All as per item No 26 here-in-before but 20mm bore all as specified and directed.

S&F 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store all as directed

S&F 25 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

S&F in repairs gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F in repairs gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engr-in-charge.

S&F in repairs 10 litre capacity PVC symphonic action type, low level flushing cistern including all fittings and including flushing pipe complete all as specified and as directed. Make: Cat No S1053121 of "Cera" or Equivalent

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets and fixing of pillar tap all as specified and as directed. Note : Supply only pillar tap for fixing will be measured and paid seperately.

Supply only Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipe and fixed completed all as specified.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F plastic pedestal pattern seat cover white with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed.

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed. Make : (FVR-CHR-29037 of "JAQUAR" or Equvalent).

S&F in repair 15mm dia, stop valve concealed type chromium plate fancy type with long shank and cup complete all as specified and directed. Make : (CON-CHR-083 FTK of "JAQUAR" or Equvalent).

S&F 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed. Make : (ARI-CHR-39053 of make "JAQUAR" or Equvalent).

S & F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed.

S&F sink cock 15mm dia fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make : (FLR-CHR-5347N of "JAQUAR" or Equvalent).

S&F Towel Rack with lower hanger (stainless steel), fixed with screws , complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H) or equivalent.

S&F PVC mirror cabinet of size 600 x 450 x125 mm all as specified and directed.

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union of 15mm bore all as specified and directed. Make : (OHS-CHR-1719 of "JAQUAR" or Equvalent).

S&F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed. Make : (SHA-CHR- 483 FTK of "JAQUAR" or Equvalent).

S&F in repairs PVC connection 15mm dia with PTMT nuts of length 600mm complete all as specified and directed.

S & F of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed.

S&Fin repair Chromium plated towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs complete all as specified and directed. Make : (AKP-CHR- 35711PS of "JAQUAR" or Equvalent).

S&F Chromium plated Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and as directed. Make : (ACN-CHR- 1121BN of "JAQUAR" or Equvalent).

S&F Stainless steel Soap dish fix to wall all as specified and directed. Make : (ACN-CHR- 1131N of make "JAQUAR" or Equvalent).

S&F Corner glass shelf large of size 300x300mm all as specified and directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin all as specified and directed.

S&F in repair brass Chromium plated Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed. Make : (ALD-CHR- 587 of "JAQUAR" or Equvalent).

S&F Stainless steel Plate Rack of size 0.75 Mtr x 0.78 Mtr all as specified and directed.

S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old pipes complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia in any radius with access door all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old pipes complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia in any radius with access door etc all as specified and directed.

S&F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc all as specified and directed.

S&F Chromium plated grating of size 100/75mm fixed with white cement all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank 500 ltr capacity including threaded type cover hoisted and fixed in position all as specified in SSR Pt - I including dismantling and taking down old unserviceable tank all as specified and directed.

S&F in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed.

S&F in repair PTMT Nipple 25mm dia suitable for HDPE water tank. (Minimum weight 25mm- 65gms) all as specified and directed.

S&F in repair PTMT Nipple 20mm suitable for HDPE water tank. (Minimum weight 20mm-45gms) all as specified and directed.

Taking down door chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

All as per item No 69 above but exceeding 1.50 sqm but not exceeding 4.00 sqm all as specified and directed.

Taking down cupboard shuttes of any description exc 1.00 Sqm and n.exc 2.00 Sqm each, all as specified and directed.

Taking down cupboard shuttes of any description exc 2.00 Sqm each, all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4, type B 0 (using 12.5 mm graded stone aggregate), depth of embedded portion of hold fast not exceeding half brick all as directed.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing including edges to match with the prelaminated sheet complete all as specified and directed.

S&F of Factory Made Solid PVC Moulded Door Shutter, with particel board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face including necessary fittings etc complete all as specified and directed.

S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F of powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) of powder coating not less than 50 micron complete all as specified and directed.

S& F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge.

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats all as specified and directed.

S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extruded section all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm long of extruded section all as specified and directed.

S&F for aluminium handle of size 150mm cast type anodised all as specified and directed.

S&F for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm length of cover plate all as specified and directed.

S&F of brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed as specified and directed.

S&F Continuous (piano) hinges, brass, bright finish of electrogalvanised 40 mm width of flap all as specified and directed.

M&L for Cover fillets of standard 6mm thick hard board, 40mm wide, and fixing with screws all as specified and directed.

M&L for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as specified and directed by Engineer-in-Charge

All as per item 93 above but figured glass pin head type all as specified and directed.

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprenee gasket complete all as specified and directed

S&F of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F of Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L for preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of red oxide primer complete all as specified and directed.

S&F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete all as specified and directed. Note: Bracket will be measured and paid separately

S& F aluminium powder coated fancy type suitabe brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necesary drilling & finished with polishing Each opening shall have two fillets at both ends all as specified and directed.

M & L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m, etc complete all as specified and directed.

M&L for screed bed of 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note:- supply only of water proofing compound will be measured and paid seperately under relevant item

Supply only liquid water proofing compound all as specified and directed. Make : conplast x 421 IC of M/s Foroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications as specified and directed. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane.

S&F of polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staircase complete all as specified and as directed.

S&F of 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 complete all as specified and as directed.

Demolition of plain cement concrete (unreinforced) in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 m but not exceeding 100 m away to low lying areas complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

M & L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.50 mm graded stone aggregate) as in sub base of fooring all as specified and directed.

M & L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and surface finished even and fair without using extra cement complete all as specified and directed.

M&L for applying three coats of brush bond acrylic based cementitious material of approved quality (Dr. Fixit- Pidifin 2K or Brushbond RFX of Fosroc India (P) Ltd. or equivalent) for sunken portion treatment all as per manufacturer instruction and providing 150micron thick polythene film over bitumen primer @ 0.5 kg /Sqm all as specified and directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregates) as in foundation , filling and mass concrete complete all as specified and directed

S&F for Low density polyethyene pipes (LDPE) 50mm bore pipe of rating 6 kg / sqcm complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil all as specified and directed.

Material and labour for providing hardcore of brocken stone or boulder of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 25 mm thick river sand filling in bedding layer for laying floor finished complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade jointed with grey cement and no pigments complete all as specified and directed.

M&L for precast cement concrete type C1 1:3:6 (using 20 mm graded stone aggregate) block masonary with solid blocks n exc 10cm in width and setting in CM 1:6 complete all as specified and directed.

M&L for two coat of water based road marking paint over one coat of primer on plastered surfaces complete all as specified and directed.

Taking down the unserviceable aluminium point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, switch sockets combination, ceiling roses, pendent regulators, bell bush, calling bell etc and making good distrubed surfaces of walls and floors etc all as directed

Taking down existing old unserviceable submain wiring complete all as specified and directed. Note : 3 runs of cable and conduit shall be measured as 01 unit.

M&L for point wiring complete with 1.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including non metallic rigid PVC conduit not less than 20mm dia or PVC Casing caping and conduit/casing caping accessories fixed to wall/floors/ceiling etc and provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor,1.5 sqmm for earth continuity conductor and connected to common earth dolly including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlests, fan regulators including fixing PVC round block 8 cm dia and 4 cm in depth etc., complete all as specified and directed for the following: -

(a) One light point controlled by one 5 Amps switch

(b) One ceiling fan/Exhaust fan controlled by one 5 Amps switch

(c) One socket 5 amp on independent board.

(d) One socket 5 amp on Same Board with other switches.

(e) One Bell Point controlled by one Bell Push

All as per item No-123 above but wiring with 2.5 sq mm FRLS copper cable including earth continuty conductor with 2.5 sq mm FRLS copper cable for one 6 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch. Note : Cutting chases for routing conduit and making good as per the existing where ever necessary shall be measured and paid seperately.

S&F switch piano 5 Amps flush type one way all as specified and directed.

S&F socket outlet 3 pin 5 Amps flush type all as specified and directed.

S&F switch socket combination 2 in 1, 5 Amps flush type all as specified and directed.

S&F switch socket combination 6/16 Amps multi pin flush type all as specified and directed.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and directed.

S&F Bell push 5A flush type, 230 volts, ISI marked complete all as specified and directed.

S&F Bell ding dong AC 230 V complete all as specified and directed.

S&F fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed.

M&L for sub-main wiring with two runs of 4 sqmm unsheathed PVC insulated, single core FRLS cable with copper stranded conductor drawn through and including suitable dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with FRLS cable of 4 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed by Engr-in-charge. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. .

S&F in repairs LED Tube light fitting 1 x20 W, 4 feet ,220V housing with PC diffuser box type with driver,holder including LED tube light connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal all as specified and as directed.

S&F in repair LED light fitting 10 W surfce type 2 feet complete with drivers ,holders LED lamps including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and as directed.

S&F in repairs MCB DB SPN 8 way, Double door, 240 V, AC, 50 Hz, with 200Amp rated bus bar including dismantling existing one complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including dismantling existing one complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning including dismantling existing one complete all as specified and directed.

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for taking down existing ceiling fan of any size and any capacity including painting and writing MES No. of exhaust fan with one coat of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc all as specified and directed.

Fixing only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose/connector to fan all as specified and directed.

Making suitable size Core cutting on stone/Bricks wall for fixing of exhaust fan 300 mm sweep and making good to the distrubed surface complete all as specfied and directed.

Supply and fixing exhaust fan steel body AC single phase 230 Volts of size 300mm sweep with blade and frame and louvers complere all as specified and directed.

Taking down existing KWH meter carefully by disconnecting incoming and out going connection and kept aside including recordrd the SL No ,Qtr No and meter reading ,and reconnecting the same after complete the work all as specified and directed.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as specified and directed.

chowdeshwariconstructionco

AURA ENTERPRISES

Lakkaiah Rangaswamy

M/s BHOOMI ELECTRICALS