Construction of S&T Service Rooms using Concrete 3D printed panels/3D printed elements at 17 non-interlocked Level Crossing gates over Sambalpur Division.

A-Execution of CPWD's DSR-2023 items 20481791.20 Below/P

C-Steel Reinforcement for RCC work 7225950.00 Below/P

D-Execution of NS items for using 3D printed panels/elements. 36230720.00 Below/P

E-Execution of NS item for Consultancy works 154083.92 Below/P

Soil exploration, architectural planning, preparation of all architectural and structural drawings and proof-checking of structural design through a reputed institution such as IITs, NITs, or any other Government-recognized institute. The scope will also include coordination with relevant 1 authorities for approvals wherever necessary. Note: Unless otherwise specified, the unit rate shall include the cost of following: (a) All labour and materials, tools and plants, equipment, machinery etc. (b)All lead, lift, ascent, descent etc. (c) All handling, rehandling, loading, unloading, freight, transportation, vehicles, deploring and when & where required and crossing one or more lines if necessary. (d) All taxes including GST, royalty and all incidental charges complete. Above/

F-Execution of CPWD's DSR-2023 Items for Transportation of 3D printed

Item Breakup - A-Execution of CPWD's DSR-2023 items

Item Breakup - B-Execution of USSOR-2021 items

34.00 undisturbed samples of soil from bore holes, including provision of air tight containers for packing and, labeling incl. transporting the samples to laboratory. Piston sampler shall be used for extracting undisturbed samples where necessary. Samples shall be collected as per IS:2720.

34.00 samples of soil from bore holes, including provision of air tight containers for packing, labeling and transporting the samples to laboratory. Samples shall be collected as per IS:2720.

34.00 IS:2131 at approximate1.5m intervals in bore holes, as directed by the Engineer in charge Conducting laboratory Tests on collected soil samples as per relevant IS code

Each Conducting Laboratory tests on collected ROCK SAMPLES as per relevant IS code

Each Total 188144.14

Item Breakup - D-Execution of NS items for using 3D printed panels/elements.

Construction of Signaling Equipment Building Sqm using Concrete 3D printed panels/3D printed elements, complete as per approved drawings and design specifications. For Soil strata: Dense sand (20-40 T/sqm) or Medium Dense sand (10- 20 T/sqm)

Construction of Signaling Equipment Building Sqm using Concrete 3D printed panels/3D printed elements, complete as per approved drawings and design specifications. For Soil strata: Clay (5-10 T/sqm) or Soft Clay (<5 T/sqm) Total 36230720.00

Item Breakup - F-Execution of CPWD's DSR-2023 Items for Transportation of 3D printed panels/elements.