INTERNAL/ EXTERNAL PERIODICAL SERVICES INCL CONNECTED SERVICES, REPAIRS TO CHAJJA AND EXTERNAL PLASTERING WORKS, ROOF POINTING/ ROOF REPAIR/ MAINTENANCE FOR BLDG TILING (WALL AND FLOORS), PAVERS BLOCKS AND CONNECTED WORKS AT DID LINE, KABUL LINE(OFFR

Dismantling of Brick tiles or terracing tiles, single layer on roofs.

M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed and specified.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Providing and fixing GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingtiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, incl dismantling of old ceiling any type all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

S&F in repair 125mm Chromium plated shower roses with or without swivel joints, with shower arm 300/600 mm long any size, including fixing to steel pipe or union complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortor 1:4 on brick/ concrete surfaces with water proofing compound and finishing the surface even and fair without using extra cement complete all as specified directed.

M&L for prepration of new plastered surfaces of wall/ Ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces. complete all as specified and directed. (Note : Finishing coat to be applied with roller)

Complete removal of existing treatment of old surface of ceiling and applying 1mm thick putty again sanding and appying two coats of acrylic emulsion paint exterior grade over primer complete all as specified and directed by Engineer-in-Charge. (Note : Finishing coat to be applied with roller)

M&L for preparation old decorated external wall surface and applying two coats of Cement base paint complete all as specified and directed by Engr-in-charge.

Complete removal of existing treatment of old surface of wall/ceiling and applying two coat of Asian paint Smartcare HYDRO LOC or Dr fixit Sure seal or Asian paint Smartcare Dampproof and applying 1mm thick putty with waterproof compound again sanding and appying two coats of acrylic emulsion/OBD (as per site requirment) paint interior grade over primer complete all as specified and directed by Engineer-in-Charge.

down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bedding in CM 1:6 including dismantling of old complete all as specified and directed by Engineer-in-Charge.

S&F in repair Waste pipe of 1 to 1.5 mtr long complete.

S&F for 16 to 18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment omplete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm incl dismantling of AC sheet complete all as specified & directed by engr-in-charge

Description all as per item No 67 above but 75 mm dia PVC SWR pipe.

Description all as per item No 69 above but 75 mm dia PVC SWR bends.

S&F for 2mm thick fibre glass reinforced translucent plain/corrugated (as directed at site by Engr in charge) sheeting fixed with coach screw and washer in roof, wall etc. including dismantling of old sheet complete all as specified.

per day

M & L for outdoor coloured ceramic tiles 8-9 mm thick ( square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed CM 1:6 complete all as specified and directed by engr in charge.

Each Set

Water proofing treatment to sunken floor and verticle comprises the following provisions as under:- (a) After demolition of floor & lime concrete etc removal all loose particle alongwith existing water profing treatment (any No of layer) with wire brushes and cleaning the surface with water.(b) Brushsing cement slurry with 1.2Kg/Sqm of cement duly blended with and including water proofing compound (Make -Dr Fixit). (c) 15 mm thick (average thickness) plastering in CM 1:3 mixed with WPC in sunken surface ,including wall . the corner of sunken portion shall be roounded in concave shape and adequate slope shall be maintain during plastering to accomodated sump pipe and ponding the sunken portion with water minimum 48 Hrs .(d) Applying self adhesive type APP base polymeric membrane minimum weight not less than 3.00 Kg /Sqm and mimimum 3mm thick laide over sunken floor and sides fixed with sealing compound at all joint to entire satisfaction of Engineer -in Charge .(MAKE-IWP, STP) (e) Filling the sunken area with Brick bats or PCC 1 :7:12 as in lean concrete under floor complete all as specified and directed.

S&F for 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and ETICHING as per design approved by GE complete in all aspects complete all as specified and directed.

S&F Top patch of any type as directed at site of make as approved by GE complete all as specified and as directed.

S&F Bottom Patch of any type as directed at site of make as approved by GE complete all as specified and as directed.

S&F Top Pivot of any type as directed at site of make as approved by GE complete all as specified and as directed.

S&F Bottom and Top corner patch lock of any type as directed at site of make as approved by GE complete all as specified and as directed.

S&F Door handle of make as approved by GE complete all as specified and as directed.

M&L for Grinding, polishing /bevelling of edges on 12mm thick toughened glass complete all as specified and as directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet f

oundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

S & F in syphon kit for low level cistern of any size as directed at site complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm n .exc 2 Sqm each complete.

Taking down shutter and refixing in same opening exc1 sqm n exc 2 sqm

S&F for Pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr in charge.

S&F for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

M&L Machine cut kota stone slab flooring 15-18mm thick over cement screed base laid and jointed with grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick screed bedding in CM 1:4 as in riser of steps, skirting, dado and pillar including rubbing ,polishing and also incl dismantling of old complete all as specified and directed by Engineer-in-Charge.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl dismantling of existing roof sheet complete all as specified and directed.

Forming jambs, etc. to openings (to foregoing item),CM 1:6 including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete

Making good under cills or over arches, lintels and bressummers. Inc cement Mortar 1:6 luding allpinning when necessary

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.

Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

Supply and fixing factory made prepolished chequred cement concrete coloured tiles 300mm x 300mm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:4 and also incl taking down of old stone/concrete tiles complete all as specified & directed.

Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying twocoat of synthetic enamel paint, over a coat of primer complete all as specified and as directed.

S&F for powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F Extruded aluminum alloy handle, fabricated type, anodized 125mm size.

S&F Extruded aluminum alloy handle, fabricated type, anodized 150mm size.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete.

S&F in repair Door closer hydraulically regulated, aluminum (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.

S&F in repair Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed.

S & F in repairs stainless steel Curtain Rod 20 mm dia with brackets fixed with stainless steel screws and including side finials and bracket/hook for fixing to wall etc complete in all aspects as specified and as directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished

Description all as per item no 9.00 above but 1000 ltr capacity complete all as specified and directed

M&L for providing RCC 1:1.5:3 type A-1 (using 20 mm grade stone aggregate) as in slab supportetd on walls, shelves, Chajjas, cantilevers or similar work complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge prepolished cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; incl taking down of old paver block/tiling complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR.

S&F in repair SS Drawer handles, projection drop (50mm to 65mm) on screwed plate complete

Taking down hood covers of gear operated rolling shutters of opening width exc 4.00 m and height exc 5.00 m, keeping shutter for repair, cleaning old grease, dust etc from gear box, vertical rod, bushes, bearings, springs and guide channels, complete lightening of shutter, strips and other parts, greasing/oiling of all moving components incl springs, minor welding works if required and replacement of worn out/unserviceability or rolling shutter for proper functioning.

S&F, factory made solid panel PVC door/cup board shutte door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement coplete as per specification and shown on drawing SSR Part-II (2020).

M & L for cleaning of water storage tank 500-1000 L capacity and washing with mild detergent or suitable chemical without damaging the existing pipelines incl taking out the water tank and refixing the same after washing (as directed at site by Engr in charge upon requirement) complete all as specified and directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Attending day to day complaint related to welder & black smith/carpeneter/plumber work alongwith helper for the repair to steel windows shutters,grills,doors,rolling shutters/wooden cabinets/plumbing & sanitary works and other related works etc including taking down, easing and refixing in the same position as reqd complete all as specified and directed. Note :- (1) the above task shall be carried out by deploying a min 01 welder having black smith skills/plumber/carpenter on day basis from 0900 hrs to 1700 hrs. (2) In case contractor fails to complete the above task as per scheduled programme a damage of Rs 500/- per day shall be deducted from his payment. 3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine, equipments and safety gear shall be provided by the contractor. 4) All maintenance material/accessories as reqd shall be issued from MES store to complete the maintenance task only ( as decided by Engr in charge) and dismantled old unserviceable item shall be deposited back to MES store yard. (5) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs.

M&L for Glazed ceramic coloured tiles in vertical surfaces 600 x 300 / 450 x 350 x 7-8mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over and incl 10mm thick CM (1:4) backing coat, including dismantling of old tiles removing rubbish off the premises complete all as specified and directed.