SPECIAL REPAIR / RENOVATION TO TOILET BLOCKS (BOYS AND GIRLS) OF KV SCHOOL BUILDING KAMPTEE.

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Material and labour flyash Birck curved on plan exc 6 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

Taking down cement plaster on brick/stone walls /ceiling etc including raking out joint, hacking for key scrubbing down with water etc., complete all as specified and directed.

Material and labour rendering 10 mm thick in cement mortar 1:6 on walls, surface finished even & smooth without using extra cement for internal wall etc., complete all as specified and directed.

Material and labour 15 mm thick rendering in two layers (first coat 10mm thick in cement mortar 1:6 and second 5mm thick in cement mortar 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with and including liquid water proofing compound as per manufacturer's instructions surface finished even and smooth without using extra cement., complete all as specified and directed. Note - Liquid water proofing compound seperately.

Material and labour rendering 5 mm thick in CM 1:3 on concrete surface of ceiling, chajja etc finished fair and even, complete all as specified and directed.

Material and labour for 1 mm thick Birla white putty/JK white wall care putty on walls, complete all as specified and directed.

Material and labour for 1 mm thick Birla white putty/JK white wall care putty on ceiling, complete all as specified and directed.

Material and labour for preparation of putty surfaces of walls and applying two coat of anti fungal plastic emulsion painting on walls over a coat of primer, complete all as specified and directed.

Material and labour for preparation of putty surfaces of walls and applying two coat of anti fungal plastic emulsion painting in ceiling over a coat of primer, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above the ground level, complete all as specified and directed.

Material and labour PCC type B-0, 1:2:4 (using 12.50 mm graded stone aggregate). 25mm thick in floor, surface finished even & fair, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises, complete all as specified and directed.

Material and labour coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n. exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4, complete all as specified and directed.

Material and labour for 10mm thick rendering with cm 1:3 on fair faces of brick work or concrete surface finishing rough for receiving wall tiles, complete all as specified and directed.

Material and labour for glazed ceramic tiles colour 450x300x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed.

Machine cut Cudapph stone slab on platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) , complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame), complete all as specified and directed.

Supply and fix rolled mild steel section in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging of grade Fe 410-S, complete all as specified and directed.

Supply and fix, Factory made kiln seasoned chemical treated 35mm thick 2nd class hard wood plain framed paneled shutter (2 or 4 number of panel with panels of timber flat on both sides, complete all as specified and directed.

Supply and fix 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

Supply and fix steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and fix steel ventilator factory made with top hung shutter including hinges steel peg stay with glazing bars, complete all as specified and directed.

Supply and fix framed work such as grills , gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165, complete all as specified and directed.

Supply and fix 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane, complete all as specified and directed.

Supply and fix 100mm long butt hinges medium weight cold rolled mild steel and fixed , complete all as specified and directed.

Supply and fix 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed , complete all as specified and directed.

Supply and fix 250 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

Supply and fix 150mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

Taking down steel tubing and connections of 15 mm bore , complete all as specified and directed.

Taking down steel tubing and connections of 20 mm bore, complete all as specified and directed.

Ditto all as per Item Sr. No.33 above but 25 mm bore complete, complete all as specified and directed.

Supply and fix 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Ditto all as per Item Sr. No.35, but 20 mm bore.

Supply and fix tubes 25mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Dismantling of water tanks and removing to store exc. 250 ltrs & not exc. 500 ltrs, complete all as specified and directed.

Supply, Hoisted and fixed in position rotational molded polyethylene water storage tanks (cylindrical with closed top) capacity 500 ltrs, complete all as specified and directed.

Supply and fix in repair 20 mm PTMT float valve, high pressure with Polythene floot and flynut complete, screwed for Iron pipe etc, complete all as specified and directed.

Supply and fix in repair gun metal gate valve of 20 mm dia with iron wheel screwed both for iron pipe, complete all as specified and directed.

Supply and fix in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule, complete all as specified and directed. Make-Plumber, Parryware & Prayag or equivalent as approved by GE.

Supply and fix in repair 15mm bore angle stop valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union, complete all as specified and directed. Make-Plumber, Parryware & Prayag or equivalent as approved by GE.

Supply and fix in repair 15mm bore concealed stop valves fancy type chromium plated cast copper alloy pressure with crutch or butter fly handles screwed both ends with long shank and cup (concealed type)for iron pipe or for union, complete all as specified and directed. Make-Plumber, Parryware & Prayag) or equivalent as approved by GE.

Supply and fix in repair chromium plated shower rose fancy type fixed to 15mm bore pipe, complete all as specified and directed. Make-Plumber, Parryware & Prayag or equivalent as approved by GE.

Supply and fix in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes,, complete all as specified and directed. Make-Plumber, Parryware & Prayag or equivalent as approved by GE.

Supply and fix in repair soap dish chromium plated (Polythurethane), complete all as specified and directed. Make-Prayag, CAT No-BA-05) or equivalent.

Supply and fix in repair stainless steel towel rail, 600 mm long, complete all as specified and directed. Make-Prayag, CAT No-BA-01) or equivalent.

Supply and fix in repair cp glass shelf with glass (Make-Prayag, BEA-49) or equivalent.

Supply and fixing low density polyethylene pipe connection with PTMT nuts suitable for 15 mm bore GI pipe 450 mm long , complete all as specified and directed.

Supply and fix in repair vitreous china squating pan WC Orissa pattern white size 580 x 440 mm with integral foot rests with ‘P’ or ‘S’ trap including provn of lime concrete bedding, complete all as specified and directed.

Supply and fix in repair PVC low level flushing cistern white slimline 10 ltrs capacity including PVC bend pipe, handle and float valve , brackets etc., complete all as specified and directed.

Supply and fix in repair vitreous china WHB coloured size 550 x 445 mm counter below or top with cp waste fittings size 32 mm, PVC waste pipe, hanging clamps etc, complete all as specified and directed. Make- Parryware (Cascade NXT brand) or equivalent )

Supply and fix in repair EWC vitreous china wash down water closet (pedestal pattern) white with integral foot rests with 'P' or 'S' trap including provn of lime concrete or bedding, complete all as specified and directed.

Supply and fix Plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P or aluminium hinging device, complete all as specified and directed.

Supply and fix vitreous in repair china half stall urinal with grating, union and spreader complete set with 40 mm dia GI light grade waste pipe incl. brackets etc, complete all as specified and directed.

Supply and fix in repair Vitreous china squatting plate urinal, white including foot rest (excluding flushing cistern, flush pipe and waste pipe) for girls, complete all as specified and directed.

Taking down eaves gutter , gas pipe, sewage pipe and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks etc., including cleaning or refixing or removal to store , complete all as specified and directed. Note: mesured overall as fixed along the centre line over fittings the accessories.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches 110 mm bore, complete all as specified and directed.

Supply and fix cast iron floor trap with CP grating 100 mm dia including jointing to waste pipe fixed in PCC type B-1 (1:2:4) etc., complete all as specified and directed.

Supply and fix PVC (SWR) junction single, (double T) equal or un equal of 110mm bore of pipe, complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl ISI marked 110mm bore , complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/ Prince or equivalent as approved by GE.

Supply only liquid water proofing compound, complete all as specified and directed.

Material and labour two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces, complete all as specified and directed.

Material and labour two coat of synthetic enamel painting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth , complete all as specified and directed.

Material and labour for 15mm thick screed bed or bedding layer of cement plaster 1:4 with water proofing compound for sunkan floor treatment finishing even and smooth without using extra cement, complete all as specified and directed. Note:WPC will be paid separately.

Material and labour applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm incl. cleaning surfaces, complete all as specified and directed.

Material and labour cement concrete Type B1 (1:2:4) (using 20mm graded stone aggregate) in sunken floor, complete all as specified and directed.

Material and labour for Precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6, complete all as specified and directed.

Material and labour mild steel TMT bar 6 to 8 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia., complete all as specified and directed.

Removing building materials to a distance of 100m or under, beyond the lead incl in the rates incl loading, unloading and stacking at the destination, complete all as specified by Engineer in charge.

E/M Works:- (Internal Electrification) Taking down unserviceable point wiring with copper/aluminium conductor cable of (light, fan, plug and power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fittings, regulator etc, and making good disturbed surfaces of walls/floor etc to match with existing surfaces including white/ colour washing/distempering all as specified and as directed.

Taking down carefully unserviceable sub main wiring of any size/capacity and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Taking down old unserviceable sheet metal enclosure with MCB's ,main switch, etc., and making good the disturbed surfaces of wall all as specified and as directed.

Material and labour for concealed point wiring 1100 volt grade single core PVC FRLSH insulated and unsheathed cable with multi-stranded copper conductor 1.50 Sqmm drawn in with and including electrical grade PVC conduit not less than 20 mm dia with IS 9537 (Part-III) 1983 marking, medium grade concealed on wall/ceiling as per site requirement including PVC FRLSH insulated and unsheathed cable with copper conductor of size 1.50 Sqmm as earth conductor and modular boxes sunk on wall for mounting modular switches, switch sockets. fan regulator, etc including modular cover with frame of any size, including making good the disturbed surfaces complete all as specified and as directed for:- (a) One light point controlled by one No. one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. Make: Cable:- Polycab/Havells/Anchor/Finolex PVC Conduit:- Polycab/Superplast/Finolex Modular Box:- Legrand/Anchor

Ditto all as per item Sr No. 76 above but, one Ceiling/ Exhaust fan point controlled by one No. one way switch and regulator.

S&F modular switch 1 way 6 Amps 250 Volts AC, 1 Module, complete all as specified and directed. Make: Legrand/Hager/Crabtree/schneider/siemens

Supply & fix ceiling rose ,3 phase /PVC/polycarbonate ,isolated body surface, complete all as specified and directed. Make: Legrand/Crabtree/Anchor

Supply and Fix Highly durable surface mounted warm type 18/20 watts LED Batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed. Make: CG/ Bajaj/ Philips.

Supply & fix sheet metal enclosure single pole & neutral for 240 volts 4/ 6 way with 200 Amp rated bus bar flush surface mounting double doo, complete all as specified and directed. Make: Legrand/ L&T/ Schenieder

Supply & fix MCB SP 6 to 32 Amps, 240 Volts,, breaking capacity 10 KA, complete all as specified and directed. Make: Legrand/L&T/Schenieder/Siemens

Supply & fix MCB SPN 6 to 32 Amps, breaking capacity 10 KA, 240 Volts, complete all as specified and as directed. Make: Legrand/L&T/Schenieder /Siemens

M&L for sub main wiring 1100 volt grade single core FRLSH PVC insulated & unsheathed cable with multistranded copper conductor drawn in electrical grade PVC conduit not less than 20mm dia marking medium grade concealed in wall/ceilling including FRLSH PVC insulated unsheathed earth wire with copper conductor of same size as of phase and neutral wire complete all as specified and making good distrubed surfaces.(Cable make: Polycab, Havells, Finolex, L&T, Legrand) (PVC Conduit make: Polycab, Superplast, Finolex) Note: accessories for point/sub main wiring like PVC junction box, bend, Tee, Elbow shall be of same make. 2 x 2.5 Sqmm + 1 x 2.5 Sqmm earth wire.

S&F Exhaust fan 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and as directed. Make: Bajaj/ CG/ Havells.

Material and labour for making holes for exhaust fan 300 mm sweep, complete all as specified and as directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.34,174.00/- ]

chronicle enterprises

H.M Traders

M/s Rahul Traders

Bidder Name

chronicle enterprises

M/S L M Chourasia

M/s Rahul Traders

H.M Traders