Waterfront Development and Beautification of Modipada Pond in ward no-25

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.

Providing and fixing in position of 3 seater designer benches of approved design & make or minimum area 1.5 mtr x 0.60 mtr. Over all minimum height 0.80 mtr consisting of FRP channel strip -seat back with ent cap (C-section of thickness up to 5mm, 1200 mm long with wooden finish bolted to side frames ). BENCH FRAME(cast iron designer frame conforming to IS 1730 made from sand casting method )

Iron work wrought & put up in trusses as per direction of Engineer-in -charge including cost of all labour, T & P, cost of all materials required for the work.

Supply, fitting & Fixing G.C.I. Sheet (Durashigne Coloured sheet 0.6mm thick) of approved quality in roofing drilling holes in wind ties with “L” or “J” hooks and bitumen and G.I. Washer etc. and ridges as required for the work including cost, conveyance and other taxes of all materials cost of all labour T&P articles required for the work etc. complete in all respect as per direction of the Engineer – in – Charge.

Fixing tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete.

Painting two coats with enamel paints of approved shade over a coat of primer in all floors to iron / wood work including sand papering, polishing the surface, including cost, conveyance, royalties and all taxes of all materials along with T & P required for the work including cost of paints etc. complete in all respect.

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment).

Fine dressing of the ground