PROVN OF GD HOUSE AND ANCILLARIES BLDG NO P02 OF HR BK AT MIL WING OF 515 ABW AND PROVN OF DHOBIGHAT ALONGWITH WATER PIPE LINES BLDG NO P01 OF HR BK AT MIL WING OF 515 ABW AND PRVN OF VEH PARKING SHED AT HQ KK SUB AREA UNDER GE (SOUTH) BANGALORE

Amount

Excavation in post holes (for similar holes) in soft/loose soil, each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,thick etc complete all as specified.and as directed

Surface excavation n.exc(not exceeding) 30 cmdeep and averaging 15cm deep and getting out in soft/loose soil etc complete all as specified.and as directed

Excavation in trenches, n exc1.5 m wide and n exc 1.5 m indepth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and getting out in hard/dense soil etc complete all as specified.and as directed

Excavation in trenches, n exc1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and getting out in soft/loose soil etc complete all as specified.and as directed

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface with broken stone /boulders etc complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base finished fair and rough to receive top layer etc complete all as specified and as directed

M&L for 25mm thick PCC 1:2:4 type B-0( by using 12.50mm graded stone aggregate as in sub base etc complete all as specified and directed

S&F joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 20mm thick in CM 1:6 etc complete all as specified and as directed.

S&F coloured glazed ceramic tile in vertical surface such as skirting ,dado,risers of steps 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over a back coat of 10mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width, in cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate), set in cement mortar 1:4 complete all as specified and directed.

M&L for cement concrete 1:4;8 type D2 (using 40mm graded stone aggregate) as in foundations, including rafts,footings, foundation beams;plinth beams; bases columns, etc.; basement slabs,under-reamed piles and mass concrete etc all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete wall surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair face of brick or concrete wall surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of dry distemper over a coat of clearcolle etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper etc over a coat of alkali resistant primer etc complete all as specified and directed.

M&L for preparation of newly cement plastered surfaces of wall and applying two coats of cement base /cement paint over a coat of cement primer etc complete all as specified and directed..

M&L for preparation of newly plastered surfaces of walls and applying two coats of white wash, including cleaning all window panes from splashes of white wash, etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick. in hard/dense soil etc complete all as directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointe etc complete.all as directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping or 'L type or 'J' type screws as specified and as directed.

S&F for 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with self tapping or 'L type or 'J' type screws as specified and as directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W(gde-E-250) quality 'A'complete all as specified and directed.

S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1998 grade St.-240 etc complete all as specified and directed.

M&L for preparation of new or previously untreated iron and steel surfaces exc 10 cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including joints filling etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick (Horizontal or sloping) etc all as specified and directed

S&F for TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns hooking ends and bindng with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F for GI tubes 'medium grade', 15 mm bore, with fittings fixed to walls, ceiling or laid in floors , complete all as specified and directed.

S&F for GI tubes 'medium grade', 20 mm bore, with fittings . fixed to walls, ceiling or laid in floors , complete all as specified and directed.

S&F for 15mm bore bib taps,fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F for 20mm bore stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe /PP-R or for brass ferrule for unions and fixed etc complete all as specified and directed.

S&F for 75mm dia PVC (SWR) foor trap, plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

S&F for 75mm dia PVC (SWR) bends any radius etc complete all as specified and directed.

S&F for 2000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position etc complete all as directed and as specified in SSR Part -I

M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.etc complete all as specified and as directed.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil etc complete all as specified and as directed.

M&L for loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells with broken bricks etc complete all as specified and as directed

M&L for loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells with broken bricks etc complete all as specified and as directed

M&L for Sand filling under floors for laying top layer including watering and consolidation etc complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces etc complete all as specified and as directed.

M&L for drilling and tapping cast iron water mains of 20mm bore (in position) for branch connections of the internal dia etc complete all as specified and as directed.

S&F in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and as directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) etc complete all as specified and as directed.

M&L for ATT Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area etc complete all as specified and as directed.

M&L for ATT Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) etc complete all as specified and as directed.

M&L for ATT Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface etc complete all as specified and as directed.

M&L for ATT Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area etc complete all as specified and as directed.

S&F TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and bindng with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for reinforced cement concrete, M-25 design mix (using 20mm graded stone aggregate) in, foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed.

M&L for reinforced cement concrete, M-25 design mix (using 20mm graded stone aggregate) as in Columns, pillars, piers,posts etc complete all as specified and as directed.

M&L for reinforced cement concrete, M-25 design mix (using 20mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.

M&L for cement concrete, 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in cills,bands and similar works complete including necessary formwork etc complete all as specified and as directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete all as specified and as directed

M&L for formwork to chullah hoods, chajjas,troughs and similar items including edges etc complete all as specified and as directed

M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exc 20cm wide etc complete all as specified and as directed

M&L for rendering 5mm thick in CM 1:3 on fair face of brick or concrete surfaces in ceiling and finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with 2% by wt. of integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified. (Note :- Water proofing compound shall be measured and paid separately under relevant item of this schedule)

Supply only integral water proofing compound all as specified

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified. and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 with WPC laid over the RCC roof slab surfaces finished even and smooth without using extra cement complete all as specified. and directed.

M&L for APP modified water proofing membrane as per IS 16540-2017 mineral finish 3mm thick and weighing not less than 3.8kg/sqm reinforced with non woven polyster/HMHDPE mett blck finished over compatible primer bonding bitumen with 100mm overlap after necessary preparation of surfaces complete as per manufacturers instructions with bituminious aluminium paint on top @ 0.1 ltr/sqm etc complete all as specified and as specified..

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified. and directed.

M&L for 40mm thick Cement concrete ,1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth without using extra cement etc complete all as specified.and as directed.

S&F for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 20mm thick in CM 1:6 etc complete all as specified and as directed.

S&F for coloured glazed ceramic tile in verticle surface exc 0.11 Sqm and not exc 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over a back coat of 10mm thick cement mortar 1:4 complete all as specified and directed.

S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and as directed.

S&F for 35mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc, complete, all as specified and as directed.

S&F for 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats etc, complete, as specifiedand as directed.

S&F in repairs steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,without glazing bars, dovetailed or welded etc, complete, as specifiedand as directed.

S&F in repairs Steel windows or ventilators, fixed type, with glazing bars etc, complete, as specifiedand as directed.

S&F for Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc, complete, as specifiedand as directed.

S&F for 4.0 mm thick sheet glass ordinary quality and glazing with metal clips/beads /oil putty in square n. exc 0.5 sqm in each pane.including hacking out the existing glass etc complete all as specified.and directed.

S&F for 3.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane.etc complete all as specified.and directed.

S&F for solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixed in opening as per specification and drawings.all as specified & directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site complete all as specified and directed.

S&F for 100 mm long extruded aluminium anodised barrel tower bolts and fixed.etc complete all as specified.and directed.

S&F for 300 mm long extruded aluminium anodised barrel tower bolts and fixed.etc complete all as specified.and directed.

S&F for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified.and directed.

S&F 300mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and directed.

S&F 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 etc complete all as specified.and directed.

S&F 125mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 etc complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified.and directed.

S&F for 125 mm long extruded aluminium alloy handles, fabricated type anodised etc complete all as specified.and directed.

S&F for 150 mm long extruded aluminium alloy handles, fabricated type anodised etc complete all as specified and directed.

S&F in repair 150mm long Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor etc complete all as specified.and directed.

S&F Harrison rails,anodised aluminium alloy with fixing brackets,stops, rollers etc. complete all as specified and directed.

M&L for machine cut cudappah stone 20-25mm thick over 20mm thick screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as specified and directed.

S&F 125 mm long Brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union etc complete all as specified.and directed.

M&L for PCC 1;2;4 type B0 (using 12.50mm graded stone aggregate) as in back filling to pressed steel door frame etc complete all as specified and as directed.

S&F vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling etc.complete all as specified and directed.

S&F 15 mm dia pillar taps cast copper alloy with capstain head chromium plated screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipes.etc complete all as specified.and directed.

S&F Towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) etc complete all as specified and directed.

S&F Vitreous China urinals, bowl type,flat back of size 465x355x265mm white (minimum) , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. etc complete all as specified.and directed.

S&F vitreous China wash down water closet pan (pedestal pattern), white , ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests and trap including connection to drain and to flushing pipe including making good to floor and flush pipe and joint between flushing pipe and socket of water closet pan etc complete all as specified and directed.

S&F 10 ltr capacity PVC valveless syphopnic action type flushing cistern, low level, coloured , with inlet, ball valve, float and handle including brackets and 32mm flush pipe complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F 15mm bore Stop valves,fancy type, chromium plated with long shank and cup (concealed) type cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for ironpipe /PP-R or for brass ferrule for unions and fixed etc complete all as specified and directed.

S&F galvanised steel water tubes 'medium grade', 25 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed.

S&F 500 Ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as directed and as specified in SSR Part -I

S&F 25mm bore ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F for 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and as directed.

S&F grating square 150 mm size of PTMT (Minimum weight 100 gms , complete all as specified and directed.

S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) , complete all as specified and directed.

M&L for preparation of previously untreated or newly plastered surfaces of ceiling and applying three coats of white wash, including cleaning all window panes from splashes of white wash, etc complete all as specified and directed.

M&L for preparation of previously untreated or newly plastered surfaces of walls and applying three coats of white wash, including cleaning all window panes from splashes of white wash, etc complete all as specified and directed.

Surface excavation n.exc(not exceeding) 30 cmdeep and averaging 15cm deep and getting out in hard/dense soil etc complete all as specified and as directed

Removing excavated material exc. 500m and not exc 1000m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width, in cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate), set in cement mortar 1:6 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F machine pressed rubber moulded precast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment laid over and including 50 mm thick consolidated sand cushioning complete all as specified and as directed. Note : The gap between kerb stone & paver block to be filled by cement mortar and finish to match the shade of interlocking paver block as directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in hard standing and finishing the surface even and fair without using extra cement incl brooming down whilst concrete is in green complete all as specified and directed.

S&F rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-410-W (Gde-E-250) quality 'A' incl painting with one shop coat of zinc chromate primer paint complete all as specified and directed.

M&L for point wiring conduit type with PVC insulated, unsheathed, single core multistranded copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through 20mm dia PVC conduit ISI marked with its acessories and fixed in sunk boxes and covered with 3.0mm thick ISI marked laminated sheet cover and brass screw with cup washers for switches/sockets/regulators etc for one light /CB/fan point controlled by one switch complete all as specified and as directed.

All as per item No. 117 here-in-before but for one 3 pin 5 Amps socket outlet point on independent board complete all as specified and directed.

All as per item No. 117 here-in-before but for one 3 pin 5 Amps socket point on the same board with other switches complete all as specified and directed.

All as per item no 117 here in before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 Amp socket.

S&F switch piano, 5 Amps, flush type single pole, one way complete all as specified and as directed.

S&F switch socket combination 2in 1,3 pin 5 and 15 Amps flush type universal complete all as specified and as directed.

S&F ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed.

S&F MCB SP 06-32A AC 240V 50Hz 10KA rating'C' curve complete all as specified. Make: Indoasian cat No 811122 to 811129/Legrand cat No 408587 to 408595/Schnider cat no A9N1P06C to A9N1P32C

S&F MCB SPN 06-32A AC 240V 50Hz 10KA rating'C' curve complete all as specified .Make: Indoasian cat No 811144 to 811151/Legrand cat No 408609 to 408617/Schnider cat no A9N2P06C to A9N2P32C

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 8 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.

S&F LED batten 20 watt, 4 feet long suitable for indoor applications with integrated electronic driver of operating voltage 110 to 270 Volts , Lumin output not less than 1800 lm including connecting up and taking down existing unserviceable surface/ ceiling mounted 28/36 watt FTL fitting complete all as specified and as diretcted. Make:- Bajaj Cat No : BCLSBAL 20W CW/C&S Cat No LTTB4F20WLED/W/ or equivalent in Crompton as approved by GE.

Supply and spread river sand to required width at bottom and top for cable cushioning all as specified and directed.(8cm before laying the cable and 15cm after laying the cable and punned into 18mm thickness) Note: Punned thickness only shall be measured and paid.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and directed.

Supply, lay, test and commissioning of LT UG cable XLPE insulated and armoured, with aluminium conductor, LT 1100 Volts grade of size 10 sqmm 4 core complete all as specified and directed. Note: 1. Exacavation, earth work, sand, bricks and PCC will be measured and paid seperately under relevant items of this schedule.

Supply, lay, test and commissioning of LT UG cable XLPE insulated and armoured, with aluminium conductor, LT 1100 Volts grade of size 16 sqmm 4 core complete all as specified and directed. Note: 1. Exacavation, earth work, sand, bricks and PCC will be measured and paid seperately under relevant items of this schedule.

S&F switch socket combination 2 in 1, 3 pin 5 Amps flush type universal complete all as specified and as directed.

S&F switch socket out let 2 in 1, 3 pin 5 Amps complete all as specified and as directed.

S&F LED batten suitable for indoor application 10W 2' length,polycarbonate housing with end cap made of ABS plastic with white colour finish and high efficiency translucence(HET) diffuser and internal electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing unserviceble tube light fittings/CFL: fittings etc complete all as specified and directed. Make: Crompton greaves Cat No LCTL-9-CDL/bAJAJ Cat No BCL3B10WH/C&S Cat no LTTB2F10WLED/W

S&F LED street light 25W with pressure die cast housing along with prismatic polycarbonate diffuser and LED's with secondary optics and IP65 protection complete with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size 24/0.2mm and including taking down existing unserviceble street light fittings etc complete all as specified and as directed.

Supply, fabriction and installation of street light mounting brackets suitable for fixing 01 no street light fittings made out of 25mm dia and 1.5mtr length of GI tube including painting with two coats of aluminium paint over a cot of primer etc complete all as specified and directed.

S&F Exhaust fans AC single phase 230/240V of size 300mm sweep with louvers etc complete all as specified and directed.

S&F Ceiling fan with electronic regulator and accessories 230V 1200MM sweep,BEE 5 Star rated etc complete all as specified and directed. Make:-Bajaj Cat No 250524.or equivalent as approved by GE

M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-1 connected to earthing test point all as specified or indicated includingincluding GI pipe of 15mm dia light grade for earth wire protection,necessary excavation,earth work in any type of soil PCC chamber and RCC cover slab connecting lesd wire from test point to DB etc complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 by using 40mm graded stone aggregate for sub base complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 22mm thick,set, jointed and pointed in neat cement slurry in floors over a screed of 20mm thick in CM 1:6 and securing properly edges of path/similar work in PCC 1:2:4 type B-1(using 20mm graded stone aggregate)etc complete all as specified and as directed.

Removing excavated material n exc. 250m and not exc 500m and depositing where directed at a level n exc. 1.5 m above the starting pointe etc complete all as specified and directed.

M&L for salt glazed stoneware drain pipes laid in trenches 150mm dia and jointed complete all as specified and directed.

M&L for plain cement concrete bed (1:3;6) type C-2 (using 40mm graded stone aggregates) to drain pipes including packing under and haunching against the sides for 150 mm dia pipe after they are laid and tested complete all as specified and directed.

M&L for cutting into existing man hole for connecting into new drain,making good to pipe and rendering,cutting out existing benching for and forming channel(1/2 round or3/4 section) in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate,smooth finishing and remorming benching as required for 150mm bore SGSW pipe etc complete all as specified and directed.

M.G. Enterprises