Kgi Dt Kptm Block Mines and Minerals fund 2023-24 New anganwadi at Thimmapuram pts Pckg No - 2023-2024-KPTM-65

Amount

1. Construction of Anganwadi Building at Thimmapuram Village H/o.Thimmapuram Estimate Amount : 14,31,000/-

Earth work excavation and depositing on bank with in initial lead of 10 mand initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Supply and Filling of M Sand including cost and Conveyance of all site etc. Complete.

Supply and Filling the basement Excavated earth other than sand including cost and Conveyance of all site etc. Complete.

Cement concrete 1:4:8 mix using 40mm metal including cost and Conveyance of all site etc. Complete.

Brick work in cm 1:5 Mix using new country bricks including cost and Conveyance of all site etc. complete.

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle

Grade beam

Columns

Lintel Roof level beam beam

Sunshade

Cement concerete 1:1.5:3 using 20mm.H.B.G.jelly for all R .c.c. items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing but providing fixtures like fanclamps

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Plastering with CM 1:3, 10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Plastering with CM 1:4, 20mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dses

Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth

Paving the floor with coloured joint free virtified tiles of size 600x600x8mm of best quality and approved variety complying/conforming ISI specification land over cement mortar 1:3(one of cement and three of sand) 20 mm thick and pointed with same colour cement neatly etc., all complete

Paving the floor with Ceramic tiles ( 305x305x6 mmRequired shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Providing the following thickness of Granolothic pattern floor finishing with plain cement concrete cc 1:2: 4 using 10 mm to 12 mm size hard broken stone jelly and the top rubbed smooth etc complete complying with standard specification 25mm thick.

Distembering two coats including priming coat with best approved distember and primer including costand conveyance of all materials to site and all labour charges etc

Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New Cement Plastered surface including cost and conveyance of materials and labour charges etc complete

Supply and Cost of Steel door , Window, Ventilator

Door (0.75x 1.20m) D

Door (1.00 x 2.10m) D1

Door (1.10 x 2.10m) D2

Windows (1.20 x 1.60m)

Ventilator (0.90x0.45m)

Fixing Charges of Steel Door

Fixing Charges of Steel windows and ventilators

Supply and fixing following thickness of cuddapah slab

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 20

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and run of 4x6 sqmm (84/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 68

Supply and run of 4 X 6sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 73

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Supply and fixing of Exhaust fan SD no 115

Supply and fixing of CFL bulb SD no 80

Bul head light SD 83

Tube light SD 88

Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125

Supply and fixing of DPI main switch SD no 142

EB Deposit

Provision of Water Supply & Sanitary arrangement

500 Ltr Tank

32mm PVC Pipe

32mm PVC Bend

25mm PVC Pipe

25mm PVC Elbow

25mm PVC Tee

25mm x20mm PVC Reducer

20mm Tap

110mm PVC Pipe 6ksc

110mm PVC Bend

110mm PVC Tee

Provision for RWH including pipes

Provision of IWC

Provision of EWC

Provision of Name Board

Provision of Manhole Cover 60x60cm Heavy

Provision of Animation Drawing

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}