CERTAIN MISC REPAIR INCLUDING WATER PROOFING STRUCTURAL REPAIR JOINERY ETC TO BLDG NO P4 P-6 P-10 ZONE A AND B OF KWC RESIDENTIAL AREA UNDER GE I RnD DELHI

Dismantling water tanks and removing to store capacity exc 500ltr n.exc 1000ltr complete all as directed and specified.

Dismantling water tanks and removing to store capacity exc 1000ltr n.exc 2000ltr complete all as directed and specified.

S&F Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 1000Ltr complete all as directed and specified.

S&F Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 2000Ltr complete all as directed and specified.

Supplying and laying in repairs of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

Supplying and laying in repairs of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

Supplying and laying in repairs of 40mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

CPVC 25mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as directed and specified.

CPVC 25mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as directed and specified.

CPVC 25mm Tank Adaptor complete all as directed and specified.

CPVC 25mm UNION complete all as directed and specified.

CPVC 40mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as directed and specified.

CPVC 40mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as directed and specified.

CPVC 40mm UNION complete all as directed and specified.

S&F in repairs in ball valve high pressure of PTMT complete with aluminium rod with polyplast ball for 25mm dia iron pipe complete all as specified

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including removal of debris out side MoD land complete all as spd and directed.

Material and labour for Reinforced cement concrete (nominal mix) type B-1 1:2;4 (using 20mm graded aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as directed and specified.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) Rough finished flat surfaces of concrete all as spd and directed.

M&L Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide in rough finished surface all as spd and directed.

Complete removal of existing roof treatment up to original roof slab and removing the entire rubbish off the premises complete all as specified and directed (work carried out upto G+7 floor).

M/L 25mm thick PCC type B1 1:2:4 (20 mm graded aggregate) Cement concrete type B-1,1:2:4 (20mm graded aggregate) on roofs to maintain level complete all as specified & directed (work carried out upto G+7 floor).

M&L for rendering 15mm thick in cm 1:3 on roof surfaces mixed with WPC 3% by weight of cement finished even and smooth without using extracement.( WPC compound will be paid separately) complete all as directed and specified (work carried out upto G+7 floor).

Supplying only integral water proofing compound complete all as specified and directed.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester mat consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane

S&F Cool roof tiles white colour 30x30cmx 9-10mm thick ,water absorption<0.08< E<3.0%,Modulus of rupture& breaking strength in N(IS:13630(pt-6):2019(EN-100),Scratch hardness(Moh's scale) IS :13630(Pt-13):2019(EN-101),Coefficient of linear thermal expansionIS:13630(Pt-4):2019(EN-103),SRI value >92 over and including 20mm thick cement screed bed in CM 1:3 all as spd and directed.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge:75mm average thickness Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members n.exc 4kg/sqm complete all as directed and specified.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.:Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer in-Charge:50mm thick in Grade M 25 with cement content not less than 330 kg per cum.Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.25 mm average thickness in 2 layers.Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.40 mm average thickness in 2 layers.Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter

M&L rendering 15 mm thick in CM (1:4) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed. Note:- (i) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a height G+7 floor

M&L cleaning open the cracks and widen the cracks to form a 'V' shaped groove. Clean the area throughly to free it from dust and loose particles. It is recommended to use a cutter for opened cracks, use paint water-based Smart Care seal is a ready to use fiber glass reinforced crack filling compound for both interior and exterior surfaces. It ensure unmatched crack bridging ability for plaster cracks of upto 3mm. Step-1 first coat smartcare crack seal putty knife/trowl recoating period 4-6 Hrs. Step-2 second coat smatcare crack seal putty knife/trowl recoating period 4-6 Hrs. Level the wall using paints wall putty and continue normal painting using primer and topcoat. Detail :- (a) Form - Ready to use paste (b) Density at 25 degrees celsius (c) Drying time - minimum 6 hours depending on temperature and humidity. (d) Flash point - crack seal is a water based which is not flammable (e) Consumption - 75-80 running feet/kg/2coats (3mm wide and 5mm deep) drying time to touch 6-8 hours. (f) Apply crack seal at least 3 CM eitherside of the crack for better adhesion. (g) Apply an additional coat of crack seal in case of severe dampness. Note :- 1. Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor. 2. The application will be done by the specialist agency. MOU will be done by the contractor with the OEM.

Cleaning and removing of all dust and paint splashes from the windows/window glasses of high rise building with water/suitable chemical where ever reqd ,upto a height of G+7 floor complete all as specified and directed. Note : Rate also includes necessary scaffolding/Jhoola works, tools & plants to carry out the work/job upto a height G+7 floor.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.Note: Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

M&L for 12mm thick cement plaster on brick/concrete surface in CM 1:6 finished even and smooth surface without using extra cement mixing with liquid WPC complete all as specified. Note : Rate also includes necessary scaffolding/Jhoola works to carry out work upto a height G+7 floor.

M&L rendering 15 mm thick in CM (1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed. Note:- (i) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a height G+7 floor

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja, parapet etc. complete all as specified.Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

M & L Preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of 2mm wall putty all as spd and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint with roller/spray having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including water based priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surface complete all as specified and directed. Make : Asian paints (apex ultima)/Berger (weather coat all ground)/Nerolac (excel total) Note:- (i) The application will be done by the specialist agency. MOU will be submitted by the contractor with the OEM. (ii) Rate also includes necessary scaffolding/Jhoola works to carry out work upto a height G+7 floor.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as spd and directed

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,including 15mm thick Screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.06 sqm,vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl10mm thick cement mortar in CM 1:4 complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc.0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or colour cement to match complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber lead joint fixed with to wall complete all as specified and directed. Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

S&F PVC (SWR) 75mm dia bends all as spd & directed

S&F 75mm PVC (SWR) branch piece, (single Y) equal or unequal complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses complete all as specified and directed.Note : Rate also includes for necessary scaffolding/Jhoola work to carry out work upto a height G+7 floor.

S&F in repair brass CP WHB mixer single lever quarter turn for mixing hot & cold water screwed down for iron pipe and fixed complete all as specification and as directed.

S & F in repairs Wall mixture chromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

Supply and fix in repairs wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

S&F in repair PVC valve less 10ltrs capacity siphonic action type flushing cistern low level white with inlet ball valve float and handle push type including flush pipe 32mm dia and connection to WC complete all as specified and as directed.

S&F in repairs Bib taps 15mm dia chromium plated fancy type with quarter turn screwed down screwed for iron pipe or for brass ferrule & fixed in repair all as spd & directed

S&F in repairs chromium plated brass shower rose 125mm dia with swivel joint complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair angle valve 15mm dia cast copper alloy chromium plated fancy type quarter turn screwed both ends for iron pipe or for union all as spd & directed

S&F in repairs PVC connections 15mm dia & 600mm long with PTMT nuts all as spd & directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)n.exc 1.5sqm and making good to disturbed surface without any extra cost complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exc 1.5sqm but n.exc 4 Sqm and making good to disturbed surface without any extra cost complete all as specified and directed.

S&F Powder Coated(minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder Coated(minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Powder Coated(minimum thickness of powder coating 50 micron)aluminium window and ventilator shutters(wire mesh shutter and glaze shutter), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F aluminium powder coated(minimum thickness of powder coating 50 micron) sliding window 3- track, 2 glass panel and 1 mesh panel sliding window aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Aluminium powder coated decogrill make DG 104(10mm thick section) with frame of section not less than 0.136kg/Rm with F channel complete all as specified and directed.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) upto a height of G+7 including necessary steel/wooden scaffolding etc complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane fixed with wooden beads or putty (in metal/wooden frames etc) upto a height of G+7 including necessary steel/wooden scaffolding etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

M&L brick work with sub class B old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as spd and directed