CA NO CWE/SGNR/TOKEN/10 OF 2021-22 SPECIAL REPAIRS OF ROAD AND ROAD SIDE FURNITURE FROM TCP-2 TO SHOPPING COMPLEX CIRCLE AT MIL STN ABOHAR

Amount

M&L for repair to pot holes any depth, n. exc. 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in road, path, etc; cutting around edges to at least 25mm in depth, making good byapplying a tack coat @5Kg/10Sqm for putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed depth of potholes exc 30mm complete all as specified and directed by Engineer-in-Charge.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engineer-in-Charge.

M & L for providing 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.50% binder content by weight of total mix, laid with self propelled mechanical paver, rolled and compacted to required camber and gradient with powder roller using paving bitumen over and including a tack coat of bitumen primer @ 5 KG/10 Sqm to existing black top surfaces complete all as specified and directed by Engineer-in-Charge.

M & L for painting lines, dashes, arrows, letters etc on road / pavement and like using thermoplastic road marking paint, for a dry film 2.5mm thick @ 5 Kg per Sqm. Binder contents 18.0% min, glass beads 30-40%, Titanium, Dioxide 10.0% min, CaCos and inert fillers 42.0 max, including preparation of old / new surface complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of dual directional reflective cat eye of size 100mm x 100mm x19mm of impact resistance ABS plastic stud having ultra violet resistance colour with plastic strip containing 31 mini retro reflective glass beads of colour white/red/yellow to each side and fixed with 12mm dia 120mm long zinc plated steel nails at the centre of cats eye by hammering complete all as specified and directed by Engineer-in- charge.

S&F in replacement Solar road stud 125mmx125mmx25mm made from aluminium alloy and consctruction powered by mono crystal solar panel with high capacity Ni-Cd rechargeble battery having view distance 1000 meters LEDs-10mm, 6 pieces for high brightness, 12 hours of continues lighting at night complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, MS round delineator 50mm dia and 600mm long having 2 Nos. 100mm dia highly reflective reflector made of PMMA and mounted on MS pipe of 50 duly powder coated anti rust and anti theft steel net available in Red / White or Yellow and embedding the same in PCC 1:2:4 type B1 using 20mm graded stone aggregate including necessary excavation and earth work complete all as specified and directed by Engineer-in-Charge. Note : Size of PCC block for embedding delineator shall be 30cm x 30cm x 30cm and cost of PCC shall be included in the unit rate of item.

S&F in repairs of solar delineator road of size 1000mm x 47mm, made out of polycarbonate and toughened aluminium body fitted with high intensity retro reflector in yellow / red colour fitted on CRCA pipe 47mm dia and 100cm long powder coated or stove enamelled white / black colour provided with steel wire mesh made up into cage for safety of reflector and embedding the same in PCC 1:2:4 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge. Note : Size of PCC block for embedding delinator shall be 30cm x 30cm x 30cm and cost of PCC shall be included in the unit rate of this item.

S&F speed bump of dimentions 730mm x 245mm x 70mm made out of ABS with resistance and wear and tear properly highly reflective reflectors moulded in PMMA material, welded with ABS base plate fixed on roads with adhesive and zinc plated nails as recommended by the manufacturers and complete all as specified and directed by Engineer-in-Charge.

Desmantling floor, hearth or wall tilling including cement mortor bedding,(but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolation of un-reinfoced cement concrete in ground floor and paving n.exc 15cm thick (below or above level) ground complete all as specified and directed by Engineer-in-Charge.

M&L for 50mm thick layer of sand cushioning under interlocking paving block flooring complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking coloured paving blocks factory casted using grey cement and with pigment and of any shape and size as directed conforming to IS 15658-2006 of 60 mm thickness, M-40 grade complete all as specified and directed by Engineer-in-Charge.

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement :3 coarse sand) inclding making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete all as specified and directed by Engineer-in-Charge

M&L PCC 1:2:4 type B1 (using 20mm graded aggregated) as in kerbs or mud stopes rounded or chamfered on edges and similar work complete all as specified and directed by Engineer-in-Charge

M&L preparing surfaces of concrete surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic paint over a coat of primer complete all as specified and directed by Engineer-in-Charge Note : A sum of Rs. 6400.00 will be deducted on account of credit for taken down material. Please refer details on Srl Page No. 19 (Schedule of Credit) of Tender documents.

Aggarwal brothers and company

AP BUILDERS