Execution of work under Minor Civil and Electric Work (Conservation of Ancient Monument) To Laying out of Underground Irrigation Pipe Line at Chaurasi Gumbad kalpi, Jalaun

Amount

Execution of work

Supply and installation of 3 HP, 3 phase submersible monoblock motor pumping set (Crompton, Kirloskar, CRI or any other ISI Brand) with required head and discharge suitable for the Baori including all other charges for installation.

Provision towards the supply and installation of HDPE (10kg/sqcm) suction pipe of 50 mm dia tightened for installation with motor pumping set in to the well as per actual requirement including all charges for the job complete.

Provision for 3 core 2.5 sqm. Copper wire cable (Finolex or other ISI marked) for the electric connection from the Borewell to panel board.

Provision for Supply fitting of Starter Panel Board suitable to run / operate 10 Hp Motor pumping set (L&T or any reputed Brand) including all fitting and labour charges

Provision for supply and installation of M.S. Cabin room of size 1.5 mtr. X 1.0 mtr. X 1.0 mtr., 40mm X 40mm X 5mm angle frame in all the four sides with supporting flat 25mm X 5mm size in two rows of all sides and frame of Single leaf door should be framed with 25mm X 5mm M.S. flat (18 Gaze Sheet) with inter lock and key system. The cabin will be installed on a cement concrete base of 1.5m X 1.0 m X 0.3m at the ration 1 cement: 1 sand: 2 concrete, the corner angles of the cabin i.e., 0.3 mtr. Extra should be installed in the cement concrete base. The work is including all the cost of required materials, manufacturing charge, labour charge and installation at site and painted with green enamel paint (2 coat)

Excavating of trenches of required width for pipes not exceeding 80mm dia including excavation for sockets and dressing of sides, ramming of bottoms, depth upto .6 m including getting out of excavated soil and then returning the soil as required in layers and not exceeding 20cm in depth including each deposited layers should be consolidating by ramming., watering etc. And depositing of surplus soil as directed within a lead of 50 mtr. (the length of trench may be decrease or increase as per the actual requirement of the site ) Total Length of Underground Pipe Line

Supplying and layout of HDPE pipes confirming to PN – 10 or PE – 100, Blue Line Marked (Kisan / Supreme / Kasta or other reputed brand) with all Taxes, Transportation charges and charges of plumbing work at site including the cost of socket, elbow, tees, and other fitting items as per requirement of site to job in complete. 3” Size

Supplying and layout of HDPE pipes confirming to PN – 10 or PE – 100, Blue Line Marked (Kisan / Supreme / Kasta or other reputed brand) with all Taxes, Transportation charges and charges of plumbing work at site including the cost of socket, elbow, tees, and other fitting items as per requirement of site to job in complete. 2.0" size

Installation of 25 mm HG.I. hydrant by providing required length of G.I. Short piece, bend, socket, solvent cement and all other charges for 0.30m x 0.30m x 0.30m size cement , sand, concrete base as per the diresction of the site -in-charge.

Supplying and fitting of 3” Size HDPE control valve heavy duty, (Supreme or any ISI marked) including all the charges of fittings and mechanical expenditure for the job in complete as per the directions of Site-in-Charge.

Supplying and fitting of HDPE End Caps heavy duty (Supreme or any ISI marked) including all the charges of fittings and mechanical expenditure for the job in complete as per the directions of Site-in-Charge. 3" Size

Supplying and fitting of HDPE End Caps heavy duty (Supreme or any ISI marked) including all the charges of fittings and mechanical expenditure for the job in complete as per the directions of Site-in-Charge. 2" size

Connection the main pipe line with the motor pumping set/ Suction pipe providing necessary G.I. fittings and including all taxes as directed by the Site-in-Charge

UMA CONSTRUCTION

DBS Engineers Pvt. Ltd.