Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹8.0 Craccepted-aoc | ₹8.0 Cr | accepted-aoc |
Tender Value
₹7.8 Cr
EMD Value
₹11.8 L
Closing Date
4 Jul 2026, 9:30 pmClosed
University of Agricultural Sciences Bengaluru
EO - KRISHNAMURTHY D
08023332765
9449866905
Construction of Boys Hostel at college of Sericulture, Chintamani
UASBNG/2026-27/OW/WORK_INDENT131
UASBNG/2026-27/OW/WORK_INDENT131
Open
Other Works
Two Tender Document System(Two Cover)
Vice Chancellor Office Bengaluru
6 documents required · 6 mandatory
List of Financial Resources with Certificates
Should have Satisfactory completed as a prime Contractor, at least one similar work to an extent of 80% (Rs. 740.00 Lakhs) of the cost of the work in the last five years.
Executed in any one year (for a continuous period of 12 months), the following minimum quantities of work. 1.Earth Work-1635.00 Cum 2.Antitermite treatment-1386.00 Sqm 3.PCC/RCC-1386.00 Cum 4.SSM-214.00 Cum 5.TMT steel-149.00 Tonne 6.Solid concrete block-3051.00 Sqm7.MS grill/ Steel work -12,916.00 Kg 8.UPVC windows/ventilator/door shutters-650.00 Sqm 9.G.I sheet V 118.00 Sqm 10.Granite stone flooring/Shira stone slab V 1455.00 Sqm 11.Water proofing - 1669.00 sqm 12.Vitrified/ceramic/glazed tiles - 2222.00 sqm 13.Plastering-12,807.00 Sqm 14.Painting-12,216.00 Sqm 15.D.G set 62.5 KVA -1 nos 16.Solar water heater - 4 nos
Equipment Capacity: Each tenderer should further demonstrate availability of following key and critical equipment: 1. Concrete Mixers- 2 Nos 2. Vibrators- 2 Nos 3. Lorry/Tipper- 2 Nos 4. Centering materials- 2500 Sqm
The Tenderer or his identified sub-contractor should possess valid license for executing Water Supply / Sanitary Engineering works and should have executed similar Water Supply/Sanitary Engineering Works totaling Rs. 35.50 lakhs.
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract with minimum numbers and qualification as mentioned below. B.E 2 Nos, Diploma 2 Nos. (CIVIL AND ELECTRIAL) & Supporting staff 5 Nos
Registration Certificate of Establishment, Form-C certificate issued by Dept. of Labour Govt. of Karnataka. ESI/EPF paid details of last 6 months.
The statement as per section-3 (1.5A) of KW4 existing commitments and on going works.
The statement as per section-3 (1.5B) of KW4 works for which tenders already submitted
Assessed available tender capacity AxNx1.5-B as per clause 3.6 Section 2-ITT of Conditions of contract
Site visit certificate
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 21-22, 22-23, 23-24 , 24-25 & 25-26 achieved in at least two financial years an average annual financial turn over of Rs.1850.00 Lakhs
Reports on the financial standing of the tenderer, such as profit and loss statements and CA audited reports for the last five years.( i.e 21-22, 22-23, 23-24 , 24-25 & 25-26)
GST paid details and IT returns copies for the previous 5 years
Liquid Assets and / or availability of credit facilities of not less than Rs.308.00 lakhs (Credit lines /letter of Credit /Certificates from banks for meeting the fund requirement, etc
The Tenderer or his identified sub-contractor should posses required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs. 65.85 lakhs
₹5,000
₹11.8 L
4 Jul 2026
19 Jun 2026
7 Jul 2026
3 Jul 2026
2 Jul 2026
Construction of Boys Hostel at college of Sericulture, Chintamani
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Concrete, Formwork & reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
DO: b) first floor
DO: c) Terrace floor
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
DO: Combined Footing (Additionalities of Formwork for Combined footing at 3%)
DO: Column Upto Plinth (Additionalities of Formwork for Columns & Piers 70%)
DO: Walls (Additionalities of Formwork for Walls at 50%)
DO: Plinth beam (Additionalities of Formwork for Plinth beam at 50% )
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
DO: Roof Beam and Lintel Beam (Additionalities of Formwork for Roof Beam, Lintel Beam @ 60%)
DO: Roof Slab (Additionalities of Formwork for Roof Slab @ 50%)
DO: Staircase (Additionalities of Formwork for Staircase @ 50% )
DO: Chajja (Additionalities of Formwork for Chajja @ 45%)
DO: FIRST FLOOR Columns (Additionalities of Formwork for Columns @ 70%- First Floor)
DO: Roof Beam and Lintel Beam (Additionalities of Formwork for Roof Beam, Lintel Beam @ 60%)
DO: Roof Slab (Additionalities of Formwork for Roof Slab @ 50%)
DO: Staircase (Additionalities of Formwork for Staircase @ 50%)
DO: Chajja (Additionalities of Formwork for Chajja @ 45%)
DO: TERRACE FLOOR Columns (Additionalities of Formwork for Columns @ 70% Terrace Floor)
DO: Roof Beam and Lintel Beam (Additionalities of Formwork for Roof Beam, Lintel Beam @ 60%)
DO: Roof Slab (Additionalities of Formwork for Roof Slab @ 50%)
DO: Chajja (Additionalities of Formwork for Chajja @ 45%)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
DO: Terrace Floor
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
DO: b) first floor
DO: c) Terrace Floor
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/msqm conforming to IS...
DO:b)First floor
DO:c) Terrace Floor
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/cum and minimum compressive strength of 4.00 N/msqm conforming to IS...
DO:b)First floor
Providing and constructing 75mm thick jaali wall using 200x200x75mm clay jaali with cement mortar 1:3 with 12mm deep recessed pointing with CM 1:3 after raking joints to depth of 12mm nicely lining ,i...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
DO:b)First floor
DO:c) terrace Floor
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
DO:b)First floor
DO: c) terrace Floor
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
DO: b)First floor
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
DO:b)First floor
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per gr...
DO:b) First floor
DO:c) terrace Floor
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specifi...
DO: b) First floor
DO:c) terrace Floor
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
DO: b) First floor
DO:c) terrace Floor
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer...
DO:c) terrace Floor
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
DO:b) First floor
DO:c) terrace Floor
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
DO:c) terrace Floor
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...
Door Works Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concret...
DO:b) First floor
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...
DO:b) First floor
Melamine polishing on wood work (one coat) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per ...
bDO:) First floor
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
DO:b) first floor
Providing and fixing Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm)
DO:b) first floor
Providing and fixing PVC Edge beading
DO:b) first floor
Wardrobe shutter
providing and fixing openable double shutters for wardrobe fixed with Ms frame of size of 35mm x35mm x 5mm ,using 25mm thick ply wood ,with 25mm x6mm thick plain teak wood beading ,l...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
DO:b) first floor
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
DO:b) first floor
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
DO:b) first floor
Providing and fixing bright finished brass door aldrop with necessary screws etc., complete
-do- 250x16x5mm
a) Ground Floor
DO:b) first floor
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete
a) Ground Floor
DO:b) first floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
a) Ground Floor
DO:b) first floor
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :
25x85x5.5 mm (heavy type)
a) Ground Floor
DO:b) first floor
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
a) Ground Floor
DO:b) first floor
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Aldrop 16mm dia, 200mm
a) Ground Floor
DO:b) first floor
Providing and Fixing Holdfast of size 260mm x 25mm x 5mm
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...
DO:c) terrace Floor
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Food Graded Water Proofing Membrane
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofin...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
DO:b) First floor
DO:c) terrace Floor
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
DO:b) First floor
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
DO:b) First floor
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
DO:b) First floor
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
DO: b) First floor
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
DO: b) First floor
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
DO: b) First floor
Providing and fixing shira stone slab cladding for wall or concrete lining etc., over 15mm thick bed of cement mortar 1:4 including pointing in cement mortar 1:3 (1 cement: 3 line aggregates) with adm...
Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , inclu...
Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
DO: b) First floor
DO:d)terrace floor
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
DO: b) First floor
DO:d)terrace floor
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
DO: b) First floor
DO: d)terrace floor
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
DO: b) First floor
DO: d)terrace floor
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/sqm width, along route of walls chipped for...
DO: b) First floor
DO: c) Terrace Floor
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
DO:b) First floor
DO:c) Terrace Floor
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
DO:b) First floor
DO:c) Terrace Floor
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
DO:b) First floor
DO: d) Terrace Floor
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
DO:b) First floor
DO:d) Terrace Floor
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
DO:b) First floor
DO:d) Terrace Floor
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
DO:b) First floor
Providing drip moulding with plastering of 25mmx 100mm in cement plaster 1:4 with rendering for projected surface ,provding and removing the cost of scaffolding inculding cost of material , labours cu...
LT ELECTRICAL WORKS
PVC CONDUITS & ITS ACCESSORIES
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/...
DO:b) 25mm dia 2mm thick
DO:c) 32mm dia 2.5mm thick
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
DO: b) 25mm dia 2mm thick
DO:c) 32mm dia 2.5mm thick
DO:d) 40mm dia 2.5mm thick
Supplying and fixing PVC/metal conduit deep junction box.
a) 19/20mm deep junction box
DO:b) 25mm deep junction box
DO:c) 32mm deep junction box
Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete. a) upto 50mm conduit in CC Floor
Supplying PVC flexible conduit pipe….mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm..using NF...
Supplying and fixing Metal fan box with round hook.
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wir...
DO:b) Medium point above 3Mtr up to 6Mtrs from tapping point to out let via switch box
DO:c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box
DO:d) Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switch box
DO:e) Three outlet in a row, above 6Mtr up to 10Mtr from tapping point to out let via switches box
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and she...
DO:b) 3Cx2.5Sqmm
DO:c) 3Cx4.0Sqmm
DO:d) 5Cx4.0Sqmm
SWITCHES, SOCKETS & ACCESSORIES
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove c...
fDO:) 10-12 Way
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
DO:f) 10-12 Module
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 a) 6 Amps one way
DO:b) 6 Amps Two way
DO:c) 6Amps 3way socket.
DO:d) Stepped fan regulator Two module
DO:e) 32A,DP,Switch
DO:f) 16Amps one way switch
DO: g) 6/16Amps universal socket
CONTROL SWITCH GEARS & ACCESSORIES
Supplying push button operated, direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic ther...
Supplying and fixing regular Vertical Type MCB distribution panel confirming to IS 8828 , on wall/wood board/ flush mounting using required clamps, bolts, nuts etc.. With provision for fixing of suita...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
DO:b) 6-32Amps DP
DO:c) 50-63Amps DP
DO:d) 6-32Amps TPN
DO:e) 40Amps TPN
DO:f) 50-63Amps TPN
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase ...
DO:II) Double Door
DO:II) Double Door
DO:III) Double Door
DO:III) Double Door
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.a)16 - 25Amps 4 pole
DO: b) 32-40Amps 4 pole
DO: c) 63Amps 4 pole
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron ….and M.S. flat with bolts, washers etc… and painted with 2 coats of red oxide and then two coats of approved paint. 40...
Supplying and fixing of metal Socket set of 2 pole and earth plugs and socket for incorporating SP and TP MCB (without MCB). The entire Plug and Socket shall be mounted in athermoplastic / powder coat...
DO: TP & N 30Amps
EARTHING AND L.T. U.G. CABLES
Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reduc...
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.a) GI strip
DO:c) 600x600x3mm GI Plate
Guy Wire & GI Wire as per IS-2141, 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 2 core 1...
DO: 4 core 10 sq.mm (10 GI Strips - 4 x 0.8 mm)
DO:4 core 16 sq.mm (11 GI Strips - 4 x 0.8 mm)
DO:3.5 core 50 sq.mm (16 GI Strips - 4 x 0.8 mm)
DO:3.5 core 70 sq.mm (18 GI Strips - 4 x 0.8 mm)
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
LT Cable a) 2.5 sqmm to 25 sqmm
DO:b) 35 sqmm to 95 sqmm
Brass Cable Gland a) 25mm
Aluminium End Terminal (Lug) a) 2.5 to 10 sq.mm
Heavy Duty Copper Terminal Long Barrel a) 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm
DO:b) 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm
Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.
DO: b) 300x50mm
Fixing charges of Post top/gate/garden fitting/LED on the existing CI/GI or any other pipe using required size of reducer, wiring using suitable wires.
Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, requ...
Using 2 Mtr long 19mm 18SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel plated.
Extra length of GI pipe of class b 19mm dia for down rod.
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necessary...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
LIGHT FIXTURES AND FANS
Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.
Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8. Power Input : 220-240V @ 50 Hz & power f...
DO: b) Led light fitting 1X4' - 20 / 22 watts
DO: c) Led light fitting 1X4' - 36/ 40 watts
Supply of round/square Recess/surface mounted rolling type LED Downlight with......WGU10LED Lamp Rib Fabricated from die cast aluminium with white powder coated prewired to mains connector & has swive...
LED square or round down light 10-12W
LED square or round down light 15-18W
Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with ...
Supply of LED Flood light with ......W system power consumption pressure die cast aluminum housing with powder coating with IP 65 protection. 1 200-270v voltage with electronic driver, PFgreater than ...
Fabricating, supplying and erection of… Mtrs long hot dip Galvanized Conical Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includin...
Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete a) Single Arm Bracket with 1000mm Sta...
Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply.. 12" sweep (300mm)
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...
Supplying wall mounting fan suitable to operate at single phase 230v AC supply.
Design, manufacture, supplying, fixing in position, testing and commissioning of following MV switchgear panels made up of 14/16G, suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...
Supply and fixing of fully enclosed Automatic Transfer Switch (ATS) Pre-wired with flexible settings and seamless transfer between twom power sources. The enclosure made of MS Power coated of necessa...
Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal ...
DO: FOUR POLE 100Amps 25kA
DO: 125Amps 25kA
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12/24V DC.
Supplying, fixing and wiring 3 phase Digit Digital Ammeter/Voltmeter
Supplying, fixing and wiring 50/5A to 400/5A 5VA burden current transformer class 0.5 accuracy with Tape wound
Supplying of multi function Meter digital three line back light LCD type display of voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 ...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital read out of percentage leakage curr...
Supplying …….amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator w...
DO: 250Amps 5x30x10mm Aluminum Strips.
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
DO: 6-32 Amps TPN
DO: 40 Amps TPN
DO: 50-63 Amps TPN
CIVIL WORKS RELATED TO ELECTRICAL WORKS Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring...
Supplying and laying double walled corrugated (DWC) HDPE pipe including all necessary connecting sockets/couplings/tees/bends/end caps of same materials in existing trench as per IS 14930 part-ii suit...
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60cm long and fixing the same in ground...
STREET LIGHT POLE FOUNDATION Supplying and Making of following necessary works for light pole foundation.Concrete Foundation 1:2:4, 300 Dia, 700mm Deep with above ground coping. MS Base Plate 225 x 2...
Supplying of two buckets standalong with buckets
Supplying of HAND GLOVES
Supplying of first aid box
Supplying of SAFETY MASK
Supplying of FIRST AID CHART with lamination
SupplyingandinstallationofRUBBERMAT1mtrx1mtr-1Ommthick.completeincludingcostofmaterials,labour,usagechargesofmachinerycomplete as per specifications.
CAMERAS & ACCESSORIES
Supply, Installation, Testing & Commissioning of 1/3" progressive scan CMOS, 5.0 megapixel, IP based Colour camera, Up to 30 m IR range, Color: 0.01Lux, 1000TVL, Digital WDR (Wid...
Supply, Installation, Testing & Commissioning of 24port 10/100/1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories.
Supplying, installation, testing and commissioning of 16 channel embedded 4K Network video Recorder (NVR) with following technical specifications. Embedded 4K NVR: Third-party network cameras supporte...
Supply, Installation, Testing & Commissioning of HDMI, Display Monitor 40" high resolution, Monitor with all mounting bracket accessories.
NETWORKING AND COMMUNICATION :
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. ...
DO: b) RJ45/I.O. outlet (For Data)
Supplying and drawing UTP-CAT 6 LAN cable.
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. a) 2 Pair
Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable. RG-6.
Supplying and fixing of switch mounting rack with power manager & cable manager.
9U with 450mm depth
Supplying and fixing of power strip.
Supplying and fixing of fan.
Supplying fixing of Network Switches
24 Port Gigabyte (manageable)
DO: 10Port Gigabyte (manageable)
Supplying & fixing of ….mtrs Cat6 Patch Cable - a) 1 mtr
Supplying & fixing of Patch Panel for LAN cabling.
DO: 16 Port 10/100 patch panel
Supplying and Fixing of MDF Krone junction box with KRONE module / Telephone cable termination.10 pair
Supply and laying 6 Core Multimode Ocum outdoor Fibre cable
Supply and providing 12F, 1U1 LC MM OM+B407, Loaded with pigtails, splice tray, adapter & splice protectors
DG SET WORKS Supplying, installing, testing and commissioning of Diesel Generator set with following specification. Power rating as per standard reference condition as per BS 5514/ISO 3046/ISO 8528 &...
Supply, Erection, testing and commissioning of AMF panel suitable for …….KVA DG set. The panel is of cubical type base /floor mounting control panel with hinged doors, undrilled bottom gland pla...
PHE WORKS Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and makin...
DO: b) First floor
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fittin...
DO: b) First floor
Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with screws, fixing materials and sealant to all sides of wall flange complete.
Make : Jaquar, M...
Providing and fixing Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges complete. ...
Providing and fixing Shower Arm Casted 120mm Long Heavy Body Round Shape for Wall Mounted Showers with Wall Flange complete Make : Jaq...
Providing and fixing C.P. brass bib cock of approved quality conforming
a) Ground Floor
DO: b) First floor
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
a) Ground Floor
DO: b) First floor
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comple...
DO: b) First floor
Supplying & fixing testing and commissioning of stainless steel soap dish Holder.
Model No- ACN -1131N
Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
a) Ground Floor
DO: b) First floor
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making ...
Supplying & fixing of Sink Cock with Regular Swinging Spout (Wall Mounted Model) With Wall Flange complete.
Model No- F-5347D
Supplying, Installing in position Grab Bar (Stainless Steel) 600mm Long with pair of fixing screws and fixing material complete.
Model No- AHS-1507
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. bra...
DO: b) First floor
INTERNAL SEWERAGE SYSTEM Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
a) Ground Floor
DO: b) First floor
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
DO: b) First floor
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
DO: b) First floor
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing & fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete..
Supplying and fixing PVC P' trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors.
Providing & Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete.
Providing and grouting sleeves made in beam/ slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all ...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
DO: b) First floor
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
DO: b) First floor
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
DO: b) First floor
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :20 mm nominal bore.
a) Ground Floor
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore.
a) Ground Floor
DO: b) First floor
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
a) Ground Floor
DO:b) First floor
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
DO: b) First floor
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
DO:b) First floor
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
DO: b) First floor
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
DO: b) First floor
Supplying , fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC shee...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
DO: b) First floor
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
DO: b) First floor
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 160 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete 1 Gully
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
DOMESTIC WATER TRANSFAR PUMP
Supplying, installing, testing and commissioning of submersible / Mono blockelectrical driven pump 1set . (1 working & standby) domestic water pumps for pumping domestic ...
Providing and fixing gun metal non- return valve of approved quality
32 mm nominal bore
Providing and fixing gun metal non- return valve of approved quality
40 mm nominal bore
Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in...
Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rungs...
Supplying fixing, testing, and commissioning of solar water heating system suitable / designed for forced circulation with solar panels hot water storage tank with suporting heating element coil syst...
Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank.
Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using sqm0 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
notification.docx
Others - Tender notification • 0.01 MB
1.docx
Tender Document • 0.57 MB
DRAWINGS.pdf
Design Document • 13.66 MB
Item no 320 detailed specification.docx
Others - Item no 320 detailed specification • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].