ADDN ALTN TO 44 QTRS AT SP MARG UNDER GE (NEW DELHI), DELHI CANTT-10

Amount

Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed

Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster incl. Removing un-serviceable material out side MOD land complete all as specified and directed

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed

(a) M & L clean the surface , remove dust, dirt , loose particles and unsound substrate and grading with cement mortar (1:4), 15 mm thick, at junction of slab & parapet, grading with a slope of 1 in 120 mixed with integral water proofing compund as per manufacturer instruction of make:- M/s Fosroc Chemicals, M/S STP Ltd, M/S IWL Ltd or equivalent as approved by GE. (b) Applying evenly a tack coat of M/s Fosroc Chemicals, M/S STP Ltd, M/S IWL Ltd or equivalent water proofing primer @ 0.25 to 0.30 kg / Sqm as a bonding layer over finished plaster surface incl cleaning the surface . (c) Over the coat of bitumen bonding layer as above APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm)and 3 mm thick reinfoced with polyster non wove fabric, unrolled and bonded completely to the substrate with side over lap of 75 mm or end over lap of 100 mm. The overlaps are then sealed/ fused by flam technology method as per manufacture instruction.

M&L cement concrete tiles of size 25 cm x 25 cm x 22 mm thick, machine pressed, set, jointed and pointed in neat cement slurry with grey cement and no pigment in roofs, floors over and including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L providing cement concrete in roof kerbs or mud stops rounded or chamfered on edges, with type B-1, 1:2:4 using stone aggregate incl form work etccomplete all as specified & directed .

Dismantling A.C/Fibre sheet corrugated or semi corrugated sheet in roof coverings complete all as specified & directed

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified & directed

Taking up or down steel tubing and connection incl cleaning for refixing or removal to store for 15 mm dia pipe complete all as specified & directed

All as per item No 9 here-in-before but for 20mm dia.

All as per item No 9 here-in-before but for 25mm dia.

All as per item No 9 here-in-before but for 40 mm dia.

All as per item No 9 here-in-before but for 80 mm dia.

S&F GI tubing ,medium grade, galvanised with all fittings fixed complete to walls and ceilings or laid in floors for 15mm bore pipe concealed / open complete all as specified & directed

All as per item No14 here-in-before but for 20mm bore pipe.

All as per item No14 here-in-before but for 25mm bore pipe.

All as per item No14 here-in-before but for 40mm bore pipe.

All as per item No 14 here-in-before but for 80 mm bore pipe.

Refixing old GI 15 mm dia tubing incl. new fittings to walls, ceilings or floors in old / new position complete all as specified & directed

All as per item No 19 here-in-before but for 20mm dia pipe.

All as per item No 19 here-in-before but for 25mm dia pipe.

All as per item No-19 here-in-before but for 40mm dia pipe.

All as per item No-19 here-in-before but for 80mm dia pipe.

Cutting chases pinning in making good to facings to brick walls if required & pointing in CM 1:3 to ends or edges or edges of landings steps, cills, sunshades shelves & cutting chases for concealed water tubing or concealed water tubing, etc and making good, cutting n.exe 10cm. girth complete all as specified & directed

S&F, in repair, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 15mm dia pipe (ISI Marked) complete all as specified & directed

All as per item No-25 here-in-before but for 20mm dia pipe.

All as per item No-25 here-in-before but for 25mm dia pipe.

All as per item No-25 here-in-before but for 40mm dia pipe.

All as per item No-25 here-in-before but in repair for 80 mm dia pipe.

Dismantling of old PVC water tank & S&F rotational moulded polythene water storage tanks in double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs incl making connection with fitting for inlet & outlet pipe complete all as specified & directed

S&F PTMT ball valves high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25mm dia complete all as specified & directed

S&F , in repair, PTMT ball valves high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 40 mm dia complete all as specified & directed

M&L cleaning RCC OHT of capacity upto 20,000 Ltrs cleaning walls & floors of tanks by wire brushing & gunny bags etc removing all scale, dirt & mud etc and removing out side the MOD land including washing with bleaching powder and painting the internal surface with black japan bituminous paint complete all as specified & directed

Demolition of cement concrete incl terrazo / tile finish in floors and paving exe 15 cm thick above ground floor (sunken floor) incl removing the demolished material outside the MOD land complete all as specified & directed

M&L cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment as under :- (a) Providing min 3" concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate admixed with WPC conplast WL . Cement slurry admixed with bonding compound Nitobond AR to be used for bonding of coving with RCC member. Covering CI pipes with PCC 1:2:4 type B-0 using 20mm graded stone aggregate admixed with integral WPC conplast WL (Fosroc Chemicals India Ltd). (b) Drilling 50mm deep holes at a distance of 1m c/c and cleaned with water and air, fixing nozzles of 12mm dia on drilled holes, injecting non shrink cement slurry at a pressure of 40 psi and nipples plugged with quick setting compounds. (c) Applying 2 full coats of brush bond acrylic emulsion based elastromeric water proofing coating after the primer with a min time gap of 4-6 hrs between 1st & 2nd coat. (d) Applying 15mm thick plaster in CM 1:4 admixed with WPC conplast WL after ponding test for a period for 72 hours of sunken floor . (e)GI tubing 40 mm dia of medium grade for spout of 150 Cm long for each sunken floor. Note :- Plastered surface area shall only be measured for the purpose of payment.

M&L for lean concrete 1:5:10 type E2(using 40 mm graded brick aggregate) as in filling of sunken portion complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4,type B-1 using 20mm graded aggregate mixed with water proofing compound @ 3% by wt of cement as in sunken floors. complete all as specified & directed (Note :- Water proofing compound to be measured & paid separately).

Supply only integral water proofing compound complete all as specified & directed

Dismantling of cast iron pipe in any type of joints and taking out of walls/trenches of 100mm dia pipe complete all as specified & directed

All as per Srl item No 39 here-in-before but 75mm dia pipe

Taking down eaves gutter & rain water pipes ( any size or pattern), incl. all fitting, heads , shoes, bends, swan necks, incl cleaning for refixing or removal to store complete all as specified & directed

S&F 100mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified & directed

All as per item No-42 here-in-before but fixed on walls

S&F 75mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified & directed

All as per item No-44 here-in-before but fixed on walls

Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 100mm pipe complete all as specified & directed

All as per item No -46 here-in-before but 75mm dia bore pipe.

S&F, in repairs, cast iron floor trap with Cockroch Proofing CP grating with or without hole including jointing to waste pipes , fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified & directed

S&F,in repairs, 100mm dia spun cast iron sanitary connection bend (92.5°) with arm 380 to 450mm long (ISI MARKED) complete all as specified & directed

All as per item No-49 here-in-before but 75mm dia

S&F , in repairs, 100mm dia cast iron bends (any radius) diminishing pieces or tapers ( larger bore measured) (ISI MARKED) complete all as specified & directed

All as per item No-51 here-in-before but for 75mm dia.

S&F , in repair, 100mm dia cast iron bends (any radius) diminishing pieces or tapers ( larger bore measured) fitted with oval access door. (ISI MARKED) complete all as specified & directed

All as per item No 53 here-in-before but for 75mm dia.

S&F, in repairs, branch piece, single, for 100mm dia Cast Iron spun pipe (equal or unequal) ordinary or inverted fitted with oval access doors complete all as specified & directed

All as per item No 55 here-in-before but 75mm dia

S&F , in repairs, cast iron cowls for 100mm bore pipe complete all as specified & directed

S&F, in repairs, 100mm dia cast iron sanitary connection- short connections pipe of length 300mm (ISI MARKED) complete all as specified & directed

S&F,in repairs, salt glazed stone ware gully traps square or rounded mouthed type P or S of size 150 x 150mm incl excavation earth work conc in Beds, surrounds kerbs & CI grating etc complete all as specified & directed

S&F, in repairs, stack clamps out of 50 mm X 5 mm flat iron and 16 mm dia round bars incl bolts and nuts and securing ends of stays to walls or on roof fixed in repairs 100 mm bore pipe complete all as specified & directed

All as per item No- 60 here-in-before but for 75mm dia bore pipe.

S & F PVC (SWR) pipes single socketed, 50 mm bore in any length with rubber ring joints, fixed to walls complete all as specified & directed

S&F PVC (SWR) bends/Tees of any radius of 50 mm bore complete all as specified & directed

S&F cast iron rainwater socketed pipes 100mm dia with cement joint without ears incl holder brackts fixed on walls.( ISI MARKED) complete all as specified & directed

All as per item No 64 here-in-before but 75mm dia. ( ISI MARKED).

S & F , in repairs, cast iron bend or elbow for cast iron rain water pipe of dia 100 mm complete all as specified & directed

All as per item No 66 here-in-before but 75mm dia.

S & F, in repairs, cast iron branch, single for cast iron rain water pipe of dia 100 mm complete all as specified & directed

All as per item No 68 here-in-before but 75mm dia.

S & F, in repairs, cast iron offset projection upto 150 mm, for cast iron rain water pipe of dia 100 mm complete all as specified & directed

All as per item No 70 here-in-before but 75mm dia.

Dismantling floor, hearth or wall tiling including CM bedding / terrazzo finish & removing serviceble tiles to store rubbish off the premises out of MOD land complete all as specified & directed

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified & directed

M&L light shade vitrified tiles 9 to 10 mm thick ( Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed..

All as per item No 74 here-in-before but as in skirting/dado etc over and including renderning 10 mm thick CM 1:4

M&L non skid ceramic tiles of approved colour and design 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed..

All as per item No 76 here-in-before but as in skirting/dado etc over and including renderning 10 mm thick CM 1:4

M&L Glazed ceramic tiles of approved colour and design in vertical surfaces 300x450x7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slury and pointed in white or coloured cement to match incl 10mm thick rendering in CM 1:4 complete all as specified & directed

M&L for circular cutting or notching and waste on glazed tiles complete all as specified & directed

M&L for double charged / ultra charged/Dark Shade vitrified tiles 10 mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but n exc 1.00 sqm , in floors etc set and jointed to over and including 15mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match over & including tucking of existing floors complete all as specified and directed..

All as per item No 80 here-in-before but as in skirting/dado etc over and including renderning 10 mm thick CM 1:4

S&F in repair vitreous china wash down water closet pedestal pattern white incl valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern.complete all as specified & directed Ist quality.

S&F in repair water closet vitreous china squatting pan of ORISSA pattern size 580 mm X 440 mm white with integral foot rest incl setting the cast iron trap & pan into cement and sand mortar, provn of lime concrete bedding complete.incl valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete all as specified & directed

S&F in repair vitreous china wash basin white flat back size 550 x 400 mm including brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, 32mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out, complete including provision of pair or bracket of angle iron 35x35x6mm duly painted with two coat of synthetic enamel paint over one coat of red oxide zinc chromate primer and embedded one end of bracket in PCC 1:2:4 type B-1 bed blocks and cutting for and pinning in ends of brackets in walls and making good complete all as specified & directed

S&F floor mounted bath room vanity unit of over all size 960 x 460 x 760mm ( Appx) and compring of cabin made of stainless steel having multiple cabins , china ware ceramic wash basin mounted on top with drain out pipes of standard size,make/quality, looking mirro of size 800 x800 mm,. The colour of vanity unit shall be got approved from GE before procurement. This unit shall installed and make functiuonal with all necessary accessories and essential parts complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1.00mm thick with plugs, washers & wastes inc bedding in cement mortar to dwraf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm. ISI marked complete all as specified & directed

S&F plate rack as in repair of size 1000 X 750 X 250 mm stainless steel made out of 1.00 mm thick steel sheet fixed to walls incl rawl plugs, drilling etc complete incl taking down old wooden plate rack complete all as specified & directed

S&F in repair 15mm dia Bib taps brass chromium plated long shank with cup fancy type with crutch or butterfly handle, screwed for iron pipe or brass ferrule complete all as specified & directed

S&F in repairs brass chromium plataed sink mixer with regular swimming spouts suitable for kitchen (wall mounted model with connecting legs/wall flanges) complete all as specified & directed

S&F in repair bib taps 15mm standard of PTMT any colour screwed for iron pipe min wt 90 gm complete all as specified & directed

S&F as in repair two con-ceated stop cocks with Basin spouts (composite one piece body) for wash basin, of brass chromium plated mixer for mixing hot and cold water suitable for wash hand basin, complete fixed to wash hand basin complete all as specified & directed

S&F in repair single level exposed shower mixer with provision of connection to exposed shower pipe (SHA-1211) with connecting legs and wall flange complete as wall mixer for mixing hot and cold water of brass chromium plated complete all as specified & directed

Supply and fix , in repair, brass chromium plated angle valve long shank with cup suitable for 15mm bore pipe, complete all as specified & directed

S&F as in repair chromium plated shower rose of size 100 x 100 mm square (ABS Chrome plated with rubit cleaning system) with or without swivel joints any type including chromium plated shower arm fixing to steel pipe and union complete all as specified & directed

S&F in repair 15mm size PVC connection 600mm long incl PTMT nuts and PVC washers at both ends screwed both ends for iron pipe complete all as specified & directed

S&F in repair brass chromium plated toilet paper holder, complete all as specified & directed

S&F in repair , brass chromium plated Health Faucet including flexible pipe of 15 mm bore and 1.20M long with and including 15 mm bore . complete all as specified & directed

S&F in repair brass chromium plated soap dish fixed with steel screw complete all as specified & directed

S&F as in repairs PVC bath room cabinet mirror of size 500 x 400 mm with single side hung shutter incl. single looking mirror with PVC inner shelves of any colour complete all as specified & directed

S&F , in repair, toughened corner glass shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified and directed

S&F in repair brass chromium plated towel rail 20mm dia D type 60cm long between flanges of brass chromium plated complete all as specified & directed

S&F, in repair, brass chromium plated towel ring square with round flange fixed with steel screw on wall as specified complete all as specified & directed

Taking down chowkhats or frame of any description n.exc 1.5 Sqm each with shutters(without taking off shutters from the frame) complete all as specified & directed

Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each with shutters(without taking off shutters from the frame) complete all as specified & directed

Taking down chowkhats or frame of any description n.exc 1.5 Sqm each complete all as specified & directed

Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each complete all as specified & directed

Taking down shutters of any description n exc 1 Sqm each complete all as specified & directed

Taking down shutters of any description exc. 1 Sqm and n exc 2 Sqm each complete all as specified & directed

M&L for refixing of shutters of any description in same opening after taking down for resecuring ,easying, repairing or adjusting etc n.exc 1.0 sqm each complete all as specified & directed

M&L for refixing of shutters of any description in same opening after taking down for resecuring ,easying, repairing or adjusting etc exc 1.0 sqm but n exe 2.0 sqm complete all as specified & directed

M&L for refixing of chowkhats or frames in same opening after taking down for resecuring , tightening of joints, fixing of hold fast etc n. exc 1.5 sqm each complete all as specified & directed

M&L for refixing of chowkhats or frames in same opening after taking down for resecuring , tightening of joints, fixing of hold fast etc exc 1.5 sqm but n exe 4.0 sqm each complete all as specified & directed

M&L 2nd class hardwood plain, solid, straight chowkhats and frames, wrought frames rebated on the solid rounded or chamfered put together with glue pinnes at joints complete all as specified and directed.

S&F 35 mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial type on both sides.Flush shutters shall have teak wood edging complete all as specified & directed

S&F factory made 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc(without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc ; size of members of shutters as specified in SSR part I sec 8,clause 8 .24(a).

All as per item No 116 here-in-before but 30mm thick for window and ventilator provided with stiles and rails as specified in SSR part I section 8 clause 8.24(b).

M&L treating end of posts , backs of chowkhats etc with tar or coal tar black paint area tarred exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified & directed

All as per item No118 here-in-before but treating small article such as stop, covers, hold fast, end of posts , back of chowkhats ,gully grating etc area n.exc 0.1 sqm.

Dismantling timber in fillets, rails posts rafters, purlins etc under 40 sqcm in section in unframed work complete all as specified & directed

M&L for 2nd class hard wood ,plain fillets square, rectangular or triangular in section exc 13 & n.exc 25 sqcm in section , wrought, secured with nails complete all as specified & directed

M&L for 2nd class hard wood ,fillets square, rectangular or triangular in section but bull nosed , splayed , chamfered or rounded on one edge or face exc 3 & n.exc 6 sqcm in section ,wrought, secured with nails complete all as specified & directed

Dismantling of existing wooden pelmet box incl curtain rod of any description and size and making good the disturbed surface to match with the existing complete all as specified & directed

S&F Drappery curtain rods decorative type stainless steel 304 Grade, 25mm nominal dia and having wall thickness 1.40 mm of approved quality/make including fixing of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 2.50m long) complete all as directed and specified.

S& F ,in repair, 18/19 mm thick prelaminated particle board, exterior grade,prelaminated both sides with decorative choice lamination , fixed with screws to timber frame work as in CB shutter,crockery show cases, kitchen cabinet shutters with 6 mm thick teak wood liping alround incl polishing to lipping complete all as specified & directed

S&F in repairs factory made18 mm thick pre laminated Celluca ply for show case including provision of shelves, partiations, shutters fixed with steel screws and solvent cement adhesive including 1mm thick lipping all around the edges complete all as per manufactured instructions. The celluca ply shall be manufactured by an ISO 9000 certified company and celluca ply density shall not less than 600 kg/sqm. The show case shall be manufactured at site as per drawing provided by Engr-in-charge at site complete all as specified.

M&L in repairs for 25 mm thick block board, grade -2 quality, interior grade, commercial type fixed with screw to timber frame work as in loft door shutters, shelves etc with 6 mm thick teak wood liping alround incl polishing to lipping complete all as specified & directed

S&F 18 mm thick prelaminated celluca ply, having density not less than 600 kg/cum with PVC lipping 1 mm thick on all outer edges of approved manufacturers , as in kitchen cabinets of box type as used in modular kitchen with pull and push type drawers as well as openable shutters, partiation/shelves to adjust the stainless steel accessories/ basket as described in item No 279 here in after complete all as specified & directed

S&F stainless steel “L Bihari” hinges having minimum thickness 2 mm suitable for kitchen cabinets/boxes for modular kitchen complete all as specified and directed.

S&F stainless steel telescopic channel with ball bearing slide system suitable for kitchen drawers complete all as specified and directed.

S&F stainless steel handles “D” type of size 150 mm long suitable for kitchen cabinet complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing, and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary portland cement 43grade and 2part of Ghagger sand mixed with adhesive/admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in Cement Mortar 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. (All services and work incl internal and external surfaces and members of six storey building).

S&F continuous (piano) hinges, mild steel bright finish or electro galvanised width of flap 40mm complete all as specified & directed

S&F ball catches with 8 mm dia steel ball, and brass bodyand striking plate including letting in to, complete all as specified & directed

S&F Cupboards knobs 40 mm dia, fixed with nut, screw and washer of mild steel, bright finish complete all as specified & directed

M&L expanded metal,cut to length, bent to shape required of mild steel wire mesh of size 100 x 100 mm x 3.15 mm dia welded mesh tying with mild steel wire not less than 0.90 mm dia binding wire or galvanised wire stales complete to existing reninforcement or steel members. (Mesh weight not exceeding 4.00 kg/sqm) complete all as specified and directed.

S&F hasp and staple of size 100mm, safety type of alumium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete.

S&F,in repair, hasp and staple of size 100mm, safety type of alumium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed

S&F wardrobe hooks (single) 50mm to 60mm of aluminium of approved make complete all as specified & directed

S&F, in repairs, wardrobe hooks (single) 50mm to 60mm of aluminium of approved make complete all as specified & directed

S&F, in repair, mild steel chromium plated, harrison rail with fixing braket complete all as specified & directed

S&F, in repairs, aluminium peg set of 6 peg, 30 to 45 CM long,wixed with pvc rawl plug & steel screw complete all as specified.

S&F wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple size of mesh 12mm complete all as specified & directed

S&F stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples complete all as specified & directed

S&F in repair stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples complete all as specified & directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, conc or brick surrounds, glazed with putty or fixed with beads exc. 1.5 Sqm complete all as specified & directed

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 Sqm in each pane 4mm thick complete all as specified & directed

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane 4mm thick complete all as specified & directed

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading as in aluminium door / window shutter, in square exc 0.5 Sqm in each pane complete all as specified & directed

S&F small fittings in repairs such as bracket of any type latch and hinges blocks shaped door and window stops and the like incl all necessary articles exc 200 cu cm n.exc. 500 cu cm each of II nd class Hard Wood complete all as specified & directed

S&F as in repair beads (any size) for glazed /gauzed joinery, renewed, incl mitreds etc & removing old beads to store of II nd class hard wood complete all as specified & directed

S&F butt hinges 100 mm long ,stainless steel with mild steel hinge pin , bright polished fixed with steel screw complete all as specified & directed

S&F butt hinges 75 mm long ,stainless steel with mild steel hinge pin , bright polished fixed with steel screw complete all as specified & directed

S&F butt hinges 100 mm long ,medium weight , cold rolled mild steel complete all as specified & directed

All as per item No 154 here-in-before but 75mm size .

S&F butt hinges , in repairs, 100 mm long ,medium weight , cold rolled mild steel complete all as specified & directed

All as per item No 156 here-in-before but 75mm size .

S&F double action spring hinges 150 mm, mild steel with steel wire spring, stove enamelled black complete all as specified & directed

S&F , in repairs, double action spring hinges 150 mm, mild steel with steel wire spring, stove enamelled black complete all as specified & directed

S&F aluminium alloy ,anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy (ISI marked) complete all as specified & directed

S&F in repair aluminium alloy ,anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy (ISI marked) complete all as specified & directed

S&F extruded aluminium alloy handles , fabricated type , anodised of size 150mm. (ISI Marked) complete all as specified & directed

S&F in repairs, extruded aluminium alloy handles , fabricated type , anodised of size 150mm. (ISI Marked) complete all as specified & directed

S&F extruded aluminium alloy handles , fabricated type , anodised of size 100mm. (ISI Marked) complete all as specified & directed

S&F in repairs, extruded aluminium alloy handles , fabricated type , anodised of size 100mm. (ISI Marked) complete all as specified & directed

S&F 300 mm size aluminium anodised barrel tower bolt of extruded section & fixed.(ISI Marked) complete all as specified & directed

S&F in repiars, 300 mm size aluminium anodised barrel tower bolt of extruded section & fixed.(ISI Marked) complete all as specified & directed

S&F 200 mm size aluminium anodised barrel tower bolt of extruded section & fixed.(ISI Marked) complete all as specified & directed

S&F in repiars, 200 mm size aluminium anodised barrel tower bolt of extruded section & fixed.(ISI Marked) complete all as specified & directed

S&F 100 mm size aluminium anodised barrel tower bolt of extruded section & fixed.(ISI Marked) complete all as specified & directed

S&F , in repairs, 100 mm size aluminium anodised barrel tower bolt of extruded section & fixed.(ISI Marked) complete all as specified & directed

S&F 150 mm ordinary helical door springs incl roller & roller plate complete of mild steel complete all as specified & directed

S&F, in repair, 150 mm ordinary helical door springs incl roller & roller plate complete of mild steel complete all as specified & directed

S&F brass chromium plated magic eye complete all as specified & directed

S&F mortice night latch of size 100mm, 4 levers of mild steel complete all as specified & directed

S&F floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring and fixed of 140 mm overall length of cover plate complete all as specified & directed

S&Fin repairs floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring and fixed of 140 mm overall length of cover plate complete all as speciified.

S&F gate and shutter hooks and eyes of aluminium plate type II of size 150 mm complete all as specified & directed

S&F , in repair, gate and shutter hooks and eyes of aluminium plate type II of size 150 mm complete all as specified & directed

S&F Fibre Glass Reinforced (FRP) door frames of cross section 90 mm x 45 mm having single/double rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. The Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides, MS stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer, made with fire – retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) wire gauzed door shutter of required colour and approved brand and manufacturer, made with fire – retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with wire gauzed panels instead of 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer-in-charge. Note :- Wire gauze shall be measured and paid separately.

S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) glazed door shutter suitable for windows of required colour and approved brand and manufacturer, made with fire – retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with glazed panels instead of 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer-in-charge. Note: - Glass panes shall be measured and paid separately.

Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, vertical surface of walls etc. complete all as specified & directed

Labour only for making half curving the edges of marble / granite slab and polishing complete all as specified & directed

Taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of bolts and nuts as required for smooth functioning of shutters and refixing the same incl hood cover complete all as specified and as directed.

S& F in repairs mild steel lock plate & handles made of of Flat iron 35 X 5 mm incl welding and painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed

S & F in repairs mild steel helical wire springs (confirming) as to IS-6248-1970) for shutters not exc 12 Sqm of approved make complete all as specified.

S & f in reapairs 3.15mm thick mild steel bracket plate hexagonal or circular in shape incl welding complete all as specified & directed .

S & F in repairs MS Black pipe 40mm dia medium grade for rolling shutters shaft incl drilling holes for fixing springs and welding to MS brackets plate complete all as specified & directed (Note MS brackets plates shall be measured and paid for separately).

S & F for replacement of inter locking lath section formed from rolled MS strips 1.20mm thick for shutters above 3.5m width complete all as specified & directed

S & F in replacement of steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position as directed complete manual type thickness of lath 1.00mm complete all as specified & directed

S&F ball bearing for rolling shutter complete all as specified & directed

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified & directed

S&F welded steel wire fabric, n.exc 4 Kg weight per sqm, cut to length bent to shape required and fixing with and including annealed mild steel wire not less than (0.90 mm dia or fixing with galvanised steel staples or welding supplied and fixed complete to wood or steel members complete all as specified & directed

M&L framed mild steel work of any description such as grills, gratings, railing for balcony area etc with ends of bars shouldered and/or riveted, welded or forged into spikes framed guard bars, barred doors & walk ways railings frame work of water tank and similar work confirming to Fe-290 Gde -E-165 complete all as specified & directed

M&L framed work such as wicket gate incl pintle hinges,stops,hand made sliding bolts etc with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, barred doors & walk ways railings .similar work confirming to Fe-290 Gde -E-165 complete all as specified & directed

S&F in repair plain black mild steel sheeting 0.80mm thick in garbage bin & water tank cover by making it into proper shape & one end moulded to form, hinges to move upside down on bearing bar incl provision of bearing bar incl welding etc complete all as specified and directed

Welding in repair not exc 2.5cm in length, metal thickness to be welded not exc 6 mm thick complete all as specified & directed

Providing & injecting chemical emulsion for post constructional antitermite treatment along external wall below conc or masonry apron using chemical emulsion @ 2.25 ltrs per linear meter incl drilling and plugging holes etc in apron complete all as specified & directed

Treatment of soil under existing floors using emulsion @ 1 Ltrs per hole, 300 mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified & directed

Providing & injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same complete all as specified & directed

Cutting shrubs wild growth trees n exc 30 cm girth or removing complete vegetable growth weeds from roof / wall including taking out roots from roof/ brick wall and injecting chemical for stoping further growth and making good to disturbed surfaces with pcc 1.2.4 type b0(using 12.5mm graded crushed aggregates) & disposed the rubbish out of MOD land for a block of 11 flats complete all as specified & directed

Demolition of reinforced cement concrete in roof, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspende work complete all as specified & directed

M&L cement concrete 1:4:8 type D-2 (40mm graded stone aggregate) as in sub base , and mass concrete complete all as specified.

M&L 75mm thick PCC 1:3:6, type C-2 (40 mm agg) as in plinth protection finished even & smooth without using extra cement complete all as specified & directed

Cement concrete 40mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) in floors pavings etc finished even & smooth with out using extra cement complete all as specified & directed

S&F glass dividing strips 3mm thick and 38mm wide inserted in position complete all as specified & directed

M&L for precast cement concrete coloured tile (PU coated) over 15 mm thick screed in CM 1:6 as in flooring over 75mm thick PCC 1:3:6 type C2 ( using 40mm graded aggregates) complete all as specified & directed

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate (nominal mix ) in slabs supported on walls, beams and columns in floor, roofs, conopies and in shelves and the like complete all as specified & directed

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate (nominal mix ) in chajjas complete all as specified & directed

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate (nominal mix ) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed

Form work to sides and soffits of floor or roof beams, cantilevers, shelves incl supports, overhang for rough finished flat surfaces complete all as specified & directed

Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for rough finished surfaces complete all as specified & directed

Taking down cement or cement lime plaster including raking out joints hacking for key, scrubbing with water etc. to receive new plaster, brick wall built in cement mortar complete all as specified and directed.

M&L renderning 15 mm thick ready mix plaster of approved make including application of bonding coat on brick/concrete ( internal surfaces) finished even and smooth complete all as specified and directed.

M&L renderning 15 mm thick ready mix plaster of approved make including application of bonding coat on brick/concrete ( External surfaces) finished even and smooth complete all as specified and directed.

M&L renderning 10 mm thick ready mix plaster of approved make including application of bonding coat on brick/concrete soffits/ceiling finished even and smooth complete all as specified and directed.

M&L renderning 15 mm thick ready mix plaster of approved make including application of bonding coat on brick/concrete on chajja/facias, finished even and smooth complete all as specified and directed.

M&L setting coat 5 mm thick cement plaster in CM 1:2 trovelled even & smooth finish, bedding layer of cement mortar in 10 mm thick 1:4 in skirting not exc 15cm width complete all as specified & directed

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar complete all as specified & directed

M&L brick work with old size subclass B" bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed

M&L brick work with old size sub class B" bricks straight or curved on plan exc 6m mean radius in CM 1:4 (work incl parapet walls) complete all as specified & directed

M&L for preparation of exposed surface of rusted steel reinforcement with metal wire brush cleaning the rusted surface free from loose rust and application of rust remover cum passivator applied with brush to the rusted reinforcement, application of rust remover with the help of wire brush, sand paaper and thoroughly washed with water with the help of pressure jet and allowing it to dry at all heights level complete. Note :- Area of cleaned reinforcement steel bars shall be measured for payment.

M&L for Preparation of surfaces of steel reinforcement by cleaning thoroughly and providing, mixing and applying zinc-anti-rust agent as zink rich epoxy anticorrosive coating for corrosion protection system in two coats @ 0.20 kg/sqm/coat. The product should confirm carbonation resistance of 2 mm and bond strength > 1 N/ sq mm according to ASTM C 882-78. and as per manufacturers method of application to rebar corrosion protection system to reinforcement at all height levels complete all as specified & directed. Note :- Surface Area of steel reinforcement bar shall be measured for payment.

M&L for polymer modified cement bonding coat, prepared and applied on the concrete/masonry surface with 1 part of Sika latex with 4 part of water and 6 part of cement by weight. Coverage Sika latex 0.25 kg/sqm for one coat at all heights levels. Adhesive bond strength not less than 2.5 MPa including chipping of the loose concrete all as specified & directed .

M&L for rebuilding the section of structutal damaged spalled concrete or RCC elements to its original size or as per recommendations by engineer-in-charge in thickness up to 40mm in layers of 20 mm each of average thickness 30mm by providing and applying with pre-batched, one component fiber reinforced cementitious polymer modified mortar having compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 5N/ mm2 (7 days) according to ASTM C 293-79 all as specified & directed .

M& L for fixing rebar of required length & diameter for structural connection in RCC slab, Baems and similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxy Arcylate based anchoring adhesive at all heights and levels, 16 mm dia hole suitable for inserting 12 mm dia reinforcement bars all as specified & directed ..

M& L for fixing rebar of required length & diameter for structural connection in RCC slab, Baems and similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxy Arcylate based anchoring adhesive at all heights and levels, 14 mm dia hole suitable for inserting 10 mm dia reinforcement bars all as specified & directed ..

M& L for fixing rebar of required length & diameter for structural connection in RCC slab, Baems and similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxy Arcylate based anchoring adhesive at all heights and levels, 12 mm dia hole suitable for inserting 08 mm dia reinforcement bars complete all as specified & directed

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed

S&F TMT bars 5 mm dia upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips including Ü"shape stirrups with necessary welding required at site complete all as specified & directed

M&L for laying Micro-concrete cement based pre-packed single component, chloride free, sulphate free, non shrink, free flow, self compacting, ready to use after mixing water in specified proportion of approved quality. The unit rate shall include the cost of form work for providing micro concrete patch repair as required at site with steel jack system and steel props to support the form work in this application of high strength, dual shrinkage, compensated, micro concrete for placing in nominal thickness of 50 mm to 150 mm for concrete repair complete all as specified & directed.

Cutting openings through brick walls built in cement mortar for doors & window & other opening or enlarging existing opening incl rubbish off the premises complete all as specified & directed

Forming Jambs etc to opening incl cutting toothing and properly bonding in to old work complete new work built in CM 1:4 complete all as specified & directed

Cutting holes in bricks walls built in cement mortar or cement lime mortar or stone walls built in lime mortar for inserting hold fasts and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-I exc. half brick but not exc one brick complete all as specified & directed

M&L for 75mm thick precast cement concrete ,type B-0, 1:2:4 (12.50 mm graded stone aggregate) as in louvres & jallies ( measured solid), set in CM 1:4 complete all as specified & directed

M&L for MS round bar 8mm dia , bent to hook shape & fixed in wall with PCC block of 1:2:4 type B-0 of size 250x100x100 mm , 2 no hook fixed in each block, overall length of hook 300mm incl. one coat of primer, complete all as specified & directed

S&F for stainless steel wire of 12 gauge complete all as specified & directed

M&L for complete removal of existing treatment on walls complete all as specified & directed

M&L for applying 3 coats of white wash on wall surface on new plastered or unplastered surface incl surface preparation surfaces complete all as specified & directed

M&L for applying 3 coats of white wash on old wall surface on undecorated plastered surfaces complete all as specified & directed

M&L for preparation of new plastered or unplastered surface of ceiling and applying 3 coats of white wash complete all as specified & directed

M&L for preparation of old plastered or unplastered surface of ceiling and applying 3 coats of white wash complete all as specified & directed

Distempering with Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gms/Ltrs, of approved manufactures, of required shade and colour complete as per manufacturers specification. Two or more coats on new work including providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

Distempering with Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gms/Ltrs, of approved manufactures, of required shade and colour complete as per manufacturers specification. Two or more coats on old prepared surface including providing and applying putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer incl preparation of surfaces over 10 cm width of girth complete all as specified & directed

M&L for two coats of synthetic enamel paint on old wooden painted surfaces incl preparation of surfaces over 10 cm width of girth complete all as specified & directed

M&L for two coats of synthetic enamel paint on new steel and iron surfaces over a coat of red oxide primer incl preparation of surfaces over 10 cm width of girth complete all as specified & directed

M&L for two coats of synthetic enamel paint on old steel and iron surfaces incl preparation of surfaces over 10 cm width of girth complete all as specified & directed

French polishing on surfaces of any description width or girth incl cleaning & preparing the surfaces incl one coat of wood filler on old surfaces with one or more coats complete all as specified & directed

M&L for 2 coat of super quality weatther proof exterior emulsion paint over & incl one coat of primer from the same manufacturer on external walls / ceiling surfaces after preparation of surface by wall care putty on old surface complete all as specified & directed

M&L finishing wall with Acrylic smooth exterior paint of required shade: New work ( two or more coats applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm) complete all as specified & directed

M&L for preparation of old painted stone wall surfaces and applying two coat of synthetic enamel paint complete all as specified & directed

S&F powder coated aluminum frame / guiding rail for sliding or side hung windows/ventilators and incl. for sliding shutters with one or more rebates incl. necessary joining cleats, rubber gasket/beading glazing clips for fixing, etc complete all as specified.

S&F powder coated aluminum glazed/gauzed window and ventilators shutters, side hung type( or sliding type) without sash bars, aluminum section weighting 0.55 kg per mtr including necessary joining cleats, glazing clips, rubber packing, aluminum snap beading, screws including fittings such as peg stays 150mm long (2 Nos) to each leaf, hinges 100mm long (2 Nos) each leaf and suitable handle (1 no.) to each leaf and locking arrangement complete all as specified.

M&L for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, welded or forged into spikes framed guard bars, barred doors & walk ways railings frame work of water tank and similar work confirming to Fe-290 Gde -E-165 complete all as specified & directed.

M&L marble work 18-20 mm thick udaipur green marble stone (table rubbed & polished) in steps window cills and like , machine cut laid over and including 15 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing complete all as specified & directed

All as per item No 258 here-in-before but for makrana white as in strips/borders of Size 10 cm wide in between and around the marble stone slab flooring

All as per item No 258 here-in-before but as in vertical surfaces such as dado/skirting laid over and including renderning 10 mm thick in CM 1:4 jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing

M&L granite 18-20 mm thick of any type work ( table rubbed and polished) for wall linning) in vertical surface as in skirting / dado etc. machine cut laid on 15 mm thick cement screed bed in CM 1:6 , laid and jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing complete all as specified & directed

M&L red colour granite( of any type) 18-20 mm thick table rubbed and polished as in cooking platform, face lifting of lift area and the like cooking plateforms, and like , machine cut laid over and including 15 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting and polishing complete all as specified & directed

All as per item No 262 here-in-before but as in vertical surfaces such as dado/skirting laid over and including renderning 10 mm thick in CM 1:4 jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing

M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling coarse over RCC slab to bring the desired slope, using water prrofing compound as per manufacturer instruction complete all as specified & directed. . Note:- Water proofing compound shall be measured and paid separately.

M&L for Preparation of RCC slab surface cracks and making V groove & repairing of crack with Single component Polyurethane sealant to make the surface water tight complete all as specified & directed

S&F brass mortice lock four lever, vertical type size 100 mm with keys fixed in position complete all as specified & directed.

S&F in repairs including making groove to existing doors for inserting lock, brass mortice lock four lever, vertical type size 100 mm with keys fixed in position complete all as specified & directed.

S&F 50mm wide and 5 to 6 mm thick rubber beading( door seal) fixed to door shutter with nails complete all as specified.

S&F PVC coloured sheet strips of 3 to 4 mm thick of size 450 mm x 150 mm with embrassing house No in three digits including fixing the sheet to wall at appropriate location, with rawl plug and screws complete all as specified & directed. Note :- The exect location of sheet shall be decided by the GE

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground levels,incl removing the demolished material outside the MOD land complete all as specified & directed

Taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed.

M/L renderning ready mix plaster 15mm thick , of approved makae on brick or conc surfaces finished even and smooth mixed with by adding permeability reducing polymer Sika Latex @ 400gm/sqm as per manufacturer's recommendations including all levelling the surface, curing etc complete. (Note :- Water proofing compound to be measured and paid separately).

M&L for preparation of new plastered wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of primer including 3mm thick wall care putty complete all as specified & directed.

M &L for providing and applying a bond coat of Sika Latex:Water:cement - 1:4:6 with sika Latex consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete all as specified & directed

Supply of Sika Latex complete all as specified & directed

Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes: Drilling holes 10mm diameter in masonary structure along the side of the joint at 45° angle so as to cross the brick/block at the intervals spacing if 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge. Cleaning of holes: Clean the holes by air blower prior to fixing nozzles. Install Sika® Packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using Sikadur 31. Cutting of Packers: Cut the packers after completion of grouting without damaging structural elements.

Supply and apply of a 3 part, very low viscous, elastic polyacrylic injection resin Sika® Injection 306 with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, Tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump Sika® Injection-306 at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or Sika® Injection-306 appears at the next packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line

M&L providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, knobs, washers etc including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc, of required size on the top of floor or the side of waste slabs with suitable arrangements as in stair case railing and balcony railing with specific size of balusters etc as defined and directed at site complete all as specified & directed

S&F stainless steel grade 304,modular kitchen accessories , 6 mm size rod thickness including :- (i) Perforated cutlery basket (ii) Grain trolley (iii) Thali basket (iv) Cup and saucer basket (v) Glass basket (vi) Plate basket (vii) Premium magic corner (viii) Oil pull out tray (Tripple basket Layer) of size as per site requirement all as specified and directed by Engr-in-Charge including roller or channel/soft closing of required size channel, bearing of stainless steel gde 304 complete all as specified & directed

M&L machine cut kota stone slab flooring 20-25 mm thick over cement screed base 15 mm thick in cement mortar and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed

All as per item No 280 here-in-before but in vertical surfaces such as dado/skirting over and including rendering 15 mm thick in CM 1:4

Description of Work / Item(s)

Amount

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittings etc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following :- (a) One light/ point controlled by one no, one way 5 Amp switch.

(b) One Ceiling fan/exhast fan point controlled by one no, one way 5 Amp switch.

(c) One light point controlled by two nos., two way 5 Amp switches.

(d) One bell/buzzer point controlled by one bell push button

(e) One three pin socket outlet 5 amps point controlled by one no, one way switch on independent board.

(f) One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board.

All as per item No. 2 here in before but with 4.0 sqmm (for phase, neutral) and 4.0 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.

Note for item No 2 & 3:- (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.

(ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required.

(iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F modular switch 230/250 volts grade one way (as catered in point wiring above) of following rating complete all as specified & directed:- (a) SP 6 Amp rating.

(b) Bell push SP 6 Amp rating.

(c) SP 16 Amp rating

All as per item No. 4 here in before but 2 way 6 Amp.

S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade (as catered in point wiring above) of following ratings complete all as specified & directed:- (a) 2/3 Pin 6 Amp combined 2 module type.

(b) 2/3 Pin 16 Amp combined 2 module type.

S&F electric bell AC 230 Volt ding-dong type comlete all as specified and directed .

S&F ceiling rose 3 phase / PVC/polycarbonated, isolated body ISI Marked complete all as specified & directed.

Disconnecting mains connection and taking out old sheet steel enclosure (DB) with metal clad 2 pin and earth plug and socket SPN, 20 amps distribution board and making good to the disturbed surface complete all as specified & directed

S& F Modular AC/Geyser plug and socket SPN, 20 amps, 240 volts AC complete with one SP MCB, 20 amps complete all as specified & directed

Disconnecting mains connection and taking out old distribution board any way SPN with 200 amp rated bus bar complete with MCB and making good to the disturbed surface complete all as specified & directed

Supply only in replacement of factory made TPN DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TPN as incomer & MCB SP/SPN as out going complete all as specified & directed

S&F factory made sheet steel distribution boards, double door, SPN, 8 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified & directed

S&F in replacement of MCCB TPN 100 Amp, 25kA thermal type complete all as specified.

S&F in replacment of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified & directed. Note : Make of the MCB should be the same as that of DB:- (a) MCB SP 10 to 32 Amps

(b) MCB SPN 63 Amps

S&F LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F in replacement aesthetically designed Wall mounted decorative bedlight LED light of 9 W fixture with opal diffuser to give glare free light including suitable LED lamp of 3 W having Lamp base E27 complete all as specified & directed

S&F in replacement aesthetically designed Wall mounted decorative mirror LED light of 3.6 W fixture with opal diffuser to give glare free light including suitable LED lamp of 3.6 W having Lamp base E27 complete all as specified & directed

S&F in replacement aesthetically designed surface mounted round shaped decorative wall/ceiling LED light of 10 W fixture with opal diffuser to give glare free light including suitable LED lamp of 15 W having dimenstion dia of 300mm. AND height 92 mm complete all as specified & directed

S&F in replacement aesthetically designed Wall mounted decorative wall LED light of 24 W fixture with opal diffuser to give glare free light including suitable LED lamp of 24 W having Lamp base E27 complete all as specified & directed

S&F in replecement of existing ceiling fan 5 star rating (Opal white)Energy saving BLDC Fan , economy range high speed having full copper motor & ribbed alluminium blades for higher air delivery,power coating provides longer life complete with accessories 230 volts 1200 mm sweep,300 RPM with air delivery 255/265 Cum/min including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified & directed Note :- Rate for taking down ceiling fan and safe deposited to MES store yard shall be deemed to be included in the quoted rates by the contractor.

S&F in addl ceiling fan 5 star rating (Opal white)Energy saving BLDC Fan , economy range high speed having full copper motor & ribbed alluminium blades for higher air delivery,power coating provides longer life complete with accessories 230 volts 1200 mm sweep,300 RPM with air delivery 255/265 Cum/min including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified & directed

S&F in replacement stepped type modular electronic fan regulator on the 2-module modular sheet etc. as required complete all as specified & directed

Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc including spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Litres capacity to reach upto satisfied finish of painting after cleaning and preparation of surface. complete all as specified and directed.

S & F in addition geysers 25 ltr capacity , properly fixing with nuts bolts / fasteners connecting with 02 Nos new CP connection complete all as specified & directed

Taking down /dismentling of LT panel meter board complete all as specified.Note:-the LT panel meter board with complete accessories to be safely deposited to MES store yard complete all as specified & directed

Taking down old sub main wiring 2 x16 sqmm sqmm aluminum/copper conductor cable and 1X10 sqmm from the concealed conduit from the wall/ceiling and making good to the disturbed surface complete all as specified & directed.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x16 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 10 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed

Disconncting,dismantling the exsiting LT panel Meter board for LIFT of size 600mmX1400mmX300mm with angle frame 50mmX50mmX6mm ,415 Volt,3 phase,4 wire with bus bar 400 amp capacity from exsiting foundation after taking proper shut down and restoration of electric supply to quaters by necceasary arrangements as directed and keeping safe custody for re fixing back including connecting up all connections, new foundation,connecting up all dismantled connection and ensure proper electricsupply distribution to users DB after carry out the following repair works in panel and necceassary PCC work of grade 1:2:4 in meter room to make sure all panels fitted properly and all soil is cover by PCC work complete all as specified & directed

Note :- (i) complete painting with two coats of enamel paint of approved colour with writing/makelogo of connection details including Bldg no.,danger sign board etc.

(ii) Welding of rusted out sheets with new sheets of thickness 2 mm.

(iii) Replacemnent of view glass for meter compartment.

M & L for plate earthing with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 32x6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc complete all as specified & directed

M & L in replacment earth continuity conductor or main earthing lead fixed to wall on batten or reccess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32X6 mm galvanised iron strip complete all as specified & directed

Taking down MCCB any type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc complete all as specified & directed

S&F MCCB, 4 pole, 415 volt of capacity 160 amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. all as specified and directed

S&F rigid non-metallic PVC conduit medium grade 20 mm dia for telephone cable complete with all fixing accessories complete all as specified & directed

Taking down/ dismantelling and refixing exhaust fan complete including Painting ,minor repair of fans complete, in situ with synthetic enamel paint by sprayingincluding filling cavities with filler, one coat after cleaning all dust etc. in all respect all as specified including making of hole and civil works and making good surfacing of existing wall all as directed

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including making of hole and good surface of existing wall complete all as specified & directed.

LIGHTENING PROTECTION Taking town carefully,repair and refixing for existing Aluminium Strip 25x3 mm lighting conductor with Saddles and fixing Screws for Roof/ Earth Conductors and Down Conductors above Ground all Joints complete all as specified and as directed. NOTE :(i) All Joints should be joined by Brazing or by using of nuts and bolts.

M&L Earthing with GI plate electrod of size 60 cm x 60 cm x 6 thick burried directly in ground vertically earth pit not less than 2.5 mtr deep below normal ground level with the top edge of the earth plate at a depth not less 1.5 mtr below normal ground level connected to GI strip earth lead of size 32X6 mm by means of bolts, nuts, washers made of galvanised iron and connected to test points.all as specified and shown in Electrical plate No 3 of MES shcedule (SSR) Part-I, 2009 connected to continuous earth strip to test point.Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of strata, charcoal, salt and PCC 1:2:4 type B1 in chambler RCC 1:2:4 type B1 cover slab with 6 mm dia mild steel bars at 100 mm center to center both ways and with 6 mm dia MS hook complete and making a good surface of existing PCC hard standing/surface area. and testing resistence all as specified and as directed. Note:-(i) GI earthing strip size 25X4mm upto 7.5 Mtr is included as above quoted rates.

S & F test point terminal block made of gunmetal or prosperous bronze size 75x75x25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal screw complete all as specified & directed

India Guniting Corporation

JYOTI ENTERPRISES

M/s Innovative Coolings and Constructions

Phoenix Infra

CHOPRA BUILDERS

M/s KUMAR BUILDERS

GOYALA INFRA PROJECTS PVT LTD.

SANJEEV ENTERPRISES

imran construction company

M/S Parshant Associates

L G BUILDERS

Gaurav Construction Company

M/S ANIL KUMAR

M/s R. K. Bhambri

JYOTI ENTERPRISES

Phoenix Infra

India Guniting Corporation

M/S ANIL KUMAR

CHOPRA BUILDERS

M/s Innovative Coolings and Constructions

GOYALA INFRA PROJECTS PVT LTD.

M/s KUMAR BUILDERS

imran construction company

L G BUILDERS

M/S Parshant Associates

Gaurav Construction Company

SANJEEV ENTERPRISES

M/s R. K. Bhambri

Bidder Name

M/s R. K. Bhambri

M/S ANIL KUMAR

SANJEEV ENTERPRISES

imran construction company

L G BUILDERS

M/S Sunil Steel Works

M/S Parshant Associates

M/s KUMAR BUILDERS

Gaurav Construction Company

M/s Innovative Coolings and Constructions

GOYALA INFRA PROJECTS PVT LTD.

India Guniting Corporation

Phoenix Infra

CHOPRA BUILDERS

JYOTI ENTERPRISES