CERTAINS REPAIRS/REPLACEMENT IMPROVEMENT TO WATER

Amount

M& L for taking out old unserviceable GI pipe of 20 mm dia pipe cutting at location/ site to remove rusted/ damaged pipe including S&F for connecting new pipe in replacement of length 0.5 RM with the existing pipe line, including testing of pipe line so repaired for complete satisfaction of Engr-in- Charge. Note:- 1.Excavation, Removal & Returning filling of soil (soft/hard) is deemed to be inclusive in the quoted rate. 2. Cost of GI fittings like socket, union, tees, long screw, nipple, hexa nipple, reducer etc is deemed to be included in the quoted rate. 3. Length of pipes required to be replaced if is more than 0.5 RM the same will be measured in the relevant items of this schedule.

Description all as per ser item no 1.00 here-in-before but GI pipe line of 25 mm dia

Description all as per ser item no 1.00 here-in-before but GI pipe line of 50 mm dia

Description all as per ser item no 1.00 here-in-before but GI pipe line of 80 mm dia

M&L taking out 100mm dia sluice valves and re-facing, regrinding replacing stuffing boxes of sluice valve spindle and gland plate replacement of gasket, nuts, bolts, washers and reassembling in existing state including excavation and earth work and making the disturbed surface as per existing surface after making the sluice valve serviceable to the entire satisfaction of Engineer-in-Charge.

Description all as per ser item no 5.00 here-in-before but Sluice Valve of 150 mm dia

Supply and laying of 100mm bore Cast Iron Pipe class 'LA' centrifugally cast with spigot and socket ends laid in trenches complete all as specified and directed by Engr-in-charge. Make: Electrosteel/Tata

Description all as per ser item no 7.00 here-in-before but Cast Iron pipe of 150 mm dia CLASS 'B'

Cutting CI pipes and reducing to required length in position for inserting of new tees branches, collors, bends etc for 150 mm dia pipes complete all as specified and directed by Engr-in-Charge. (Both sides cutting shall be measured as one unit)

Material & labour for cast iron fittings any type such as bends any types radius and angle tapers any type, (straight bends increasing / decreasing or double sockets etc) Tee pieces single branch, Y junction, double branch cross (all socket or socket and spigot) collars, caps and plugs upto 150 mm bore dia as specified and directed by Engr-in-Charge.

Materal for providing run lead joints for spigot and socket CI pipes of 100 mm dia including lead and sutlee etc complete all as specified and directed by Engr-in-Charge.

Description all as per ser item no 11.00 here-in-before but lead joint for CI Pipe of 150 mm dia

Material & Labour for Galvanised Iron Pipe 20 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in trenches floor complete all as specified and directed by Engr-in-Charge.

Description all as per ser item no 13.00 here-in-before but GI Pipe of 25 mm dia

Description all as per ser item no 13.00 here-in-before but GI Pipe of 40 mm dia

Description all as per ser item no 13.00 here-in-before but GI Pipe of 50 mm dia

Description all as per ser item no 13.00 here-in-before but GI Pipe of 80 mm dia

M&L for Taking up or down galvanised iron tubing 20 mm dia connections from trenches or any position for re-fixing alongwith pipe or removel from site complete all as specified and directed by Engr-in-Charge.

Description all as per ser item no 18.00 here-in-before but Galvanised Iron pipe of 25 mm dia

Description all as per ser item no 18.00 here-in-before but Galvanised Iron pipe of 40 mm dia

Description all as per ser item no 18.00 here-in-before but Galvanised Iron pipe of 50 mm dia

Description all as per ser item no 18.00 here-in-before but Galvanised Iron pipe of 80 mm dia

M&L for Repair and replacement of Cast Iron Air Valves inside ball , conforming to IS 14845 of size 250 mm dia bore 1m height including taking out old unserviceable air valve complete as specified and directed by Engr-in- Charge. Make:- Kirloskar/Leader/ Sant Note:- All minor items required for efficient & complete fitment of the valve is deemed to be included in the quoted rate.

Material and Labour for cast iron pipe 150mm bore with flanged ends centrifugally cast class 'A' in any length laid in trenches including taking out old unserviceable pipes complete all as specifed and directed by Engr-in-Charge. Make: Electrosteel/Tata

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for laying of CI / GI pipes laying in trenches and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in trenches including , leveling watering and well ramming in layers not exc 25 cm in soft / loose soil, complete all as specified and directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at level nexc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

Supply & fix cast iron sluice valve 150 mm dia, flanged ends,stem (spindle) of SS (forged) and check nut of gun Metal, PN rating 1.6,working parts conforming to IS :14846, and flanged ends having drilling as per IS:1538 including taking down old unserviceable sluice valve complete all as specified and directed by Engr-in-Charge. Make : Leader/ Kirlosker /SANT

Supply and fix Gun Metal gate valve with Iron wheel head screwed both ends for GI steel tubing 25mm dia including taking down unserviceable valves complete all as specified and directed by Engr-in-Charge. Make : Leader/NETA/SANT

Description all as per ser item no 1.29 here-in-before but Gun Metal Valve of 40 mm dia

Supply only of Calcium Hypochlorite (Calcium based granular disinfectant for water treatment, more stale than chlorine gas and stronger than bleaching powder and sodium hypo chlorite) packing in 90 Kgs plastic drums, complete all as specified and directed by Engr-in-Charge Make: All make approved by CMPT.

Supply only Water Testing Kit for the estimation of Residual Chlorine, Make: NICE/HACH/Prerana

Supply and fixing high quality chlorine pipe of 4-6 mm dia high pressure pipe for chlorine supply all as specified and directed.

Material and labour replacement of worn out / defective thermal overload relay with range 45-75 Amps suitable for 50 HP star- delta starter 415 V, 50 Hz,complete all as specified and directed by Engr-in-Charge. Make: L&T Cat part No XM81807OOOOO/ SIEMENS/SCHENIDER

Material and labour replacement of worn out / defective 3 Pole power contactor suitable for 50 HP star- delta starter 415 V, 50 Hz,with current rating 70 amps complete all as specified and directed by Engr-in-Charge. Make: L&T Cat part No SS90910 /SIEMENS /SCHENIDER

S&F centrifugally cast (spun) ductile iron pressure pipes with socket& spigot ends having ISI stamping marking with IS 8329/2000 classification K9, In standard length of 5.5 - 6 mtr suitable for and including push on joint (gassket D jointing) with cement mortar lining in the pipes , complete all as specified & directed of 150 mm dia complete all as specified and directed. Make: Electrosteel/TATA/Jindal

Material and labour construction of brick masonary valve pit of size 1200 mm x 1200mm x 1200 mm (Internal size) thickness of walls shall be 23cm in brick work in cm 1:6 internally plastered in cm (1:6) and externally plastered in cm (1:4) over 15cm thick PCC 1:4:8 type D-2 having 15m offset around, including 4 cm thick coping in PCC 1:2:4 type B-1 as the top of the brick wall and 3mm thick mild steel sheet cover and angle iron frame of size 40 mm x 40mm x 6mm including provn of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint, over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge .

Supply & Fixing DI fittings for flanged & spigot socketed pipe e.g. bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces, collars, caps and plugs conforming to IS of size upto 150mm bore complete all as specified and directed.

M&L in replacement of digital water level indicator device, operating on single phase supply, direct display in 150mm size digit system in meter/centimeter of water level of sumps/overhead tank ensuring alarm while water fall or rise at predetermined limit, One minute auto-off alarm. The entire unit must operate through a compact electronic circuit, which must ensure reliable operation at 230V +/-5% with reliable in digit display % alarm at low and high level of sumps/overhead tank. . The circuit must be housed in a MS CRC sheet box with nylon moulded connection strips. The level must be of resistance transducer, which is unaffected by corrosion and other contacts available in water. The product must be controlled by a microswitch . The whole unit must be electronically controlled and upper level and lower level indicator must be highly sensitive micro switch all as directed by Engr-in-Charge.

S&F NRV valve of 15-20mm dia of chlorine dozing pump outgoing to main line all as speciifed and directed by Engr in charge.

Supply only in replacement of unserviceable agitator drum of 200 Ltrs with shaft impellar of dosing system having shaft dia 32mm, min 2 feet long and impeller dia 80mm of material PVC. Make: All make approved by CMPT.

S&F First Aid chart with clear glass cover & wooden frame complete all as specified and directed and as per sample.

S&F in replacement of Iron ladders fabricated from structrual steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one perimer coat, one under coat and one finishing coat of aluminium paint all as specified and directed.

S&F Sheet metal one way enclosure all as per Make Legrand, Cat No. - 6079 44 incld. MPCB three pole, 415 V, 25 KA,160 Amps all as per Make Legrand, Cat No. - 420723 or equivalent in L&T/ Schneider. Note :- The quoted rate is deemed to be inclusive of minor items like nuts, bolts, etc and minor jobs to be done at site for the fitment of the enclosure on the existing angle frame, etc. and including M&L for connetion of incoming and outgoing cable complete to the entire satisfaction of Engr-in-Charge.

Disconnecting from electric mains, dismantling DG set AMF panel from Ph No 6, and to be transported & installed at PH No 8 all as directed by Engr in charge. (Note:- Panel so shifted is to be mounted on a grouted base frame made out of equal angle iron of size 40x40x6 mm duly painted with two coats of black colour epoxy paint over a coat of red primer)

Material and labour Earthing by using MS galvanised earth plate of size, 60x60cmx 6mm thick, as earth electrode surrounded by charcoal salt buried directly in ground vertically in pit of depth not less than 2.25 metres deep below ground with top edge of the earth plate at a depth less than 1.5 metres below normal ground level surrounded from all sides with 15cm thick layers of mixture of charcoal dust and common salt in alternate layers and electrode connected to galvanised iron strip 32x6mm size by mean of bolts, nuts, checknuts, and washers of galvanised iron connected to main switch board or main control board and proteced in GI pipe light grade 40mm dia all as shown in electrical plate No.5 of SSR part-I including necessary exc. and earth work. The rate also include for testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type C1 40mm thick RCC(1:2:4) type B-1 cover reinforced with 8mm dia TMT bars @ 15mm c/c both ways and CI frame etc. and testing complete including taking out old unserviceable earthing complete all as specified and directed by Engr-in-Charge.

Material and labour for cleaning of RCC Overhead reservoir 150000 Glns capacity incl rubbing of internal surface by wire brush/scrubber,desilting of tanks manually cleaning the internal domes with brush, removing loose/deposited dirt etc, cleaning with water thoroughly preparing the surface for painting, providing two coats of cement base paint internally, including cleaning and painting of ladder, rising Main & distribution pipes with two coats of synthetic enamel paint of colour as approved by Engr-in-charge and removal of old paint from outer structure of RCC tank with the help of broom, steel brush and applying two coat of non washable odourless distemper and writing date of cleaning and tank capacity over a coat of black paint,including cleaning of area, cutting the small branches, taking out from roots within the premises complete all as specified and directed complete all as specified and as directed by Engr-in-Charge. Note: (i) All tool and plant, Scafolding shall be made available by the contractor and nothing extra shall be paid.

Material and labour for cleaning of RCC Overhead reservoir 25000 Glns capacity incl rubbing of internal surface by wire brush/scrubber,desilting of tanks manually cleaning the internal domes with brush, removing loose/deposited dirt etc, cleaning with water thoroughly preparing the surface for painting, providing two coats of cement base paint internally, including cleaning and painting of ladder, rising Main & distribution pipes with two coats of synthetic enamel paint of colour as approved by Engr-in-charge and removal of old paint from outer structure of RCC tank with the help of broom, steel brush and applying two coat of non washable odourless distemper and writing date of cleaning and tank capacity over a coat of black paint,including cleaning of area, cutting the small branches, taking out from roots within the premises complete all as specified and directed complete all as specified and as directed by Engr-in-Charge. Note: (i) All tool and plant, Scafolding shall be made available by the contractor and nothing extra shall be paid.

Supply and laying UG cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cable of size 70 sqmm 3.5 core ( heavy duty) 1100 volts grade with stranded aluminium conductor laid in trenches/road crossing/on pole/wall etc. :- Make:- Havells, KEI, Grandlay

Supply and fix in replacement of LED Post top lantern of not less than 20 Watt, IP65 class of Make : Wipro Model No LP07-251-XXX-57-CL or equivalent in Philips/Crompton. Note:- Quoted rated is deemed to be inclusive of fixing of GI pipe of suitable size on/in the RCC pillers so as to fix the post top lantern & it is also deemed to be inclusive of minor spares such as nut, bolts, washers, wire etc. required for the complete & efficient operation of the luminaries.

Materials and labour for fabrication,supply and errection of bakelite flex display boards made out of MS square pipe frame of size 20mmX20mm cover all 4 sides covered with powder coated CRCA sheet & back side covered by galvanised sheet of 24 guage. Front open box type with front side covered by flex board bakelite with digital printed letters and figures as requred The board shall be cubical type with screw fittings for opening and closing front side for maintenances. using MS channel for beading including inside electrical wiring comlete with ube light fittings 1 X40 Watt /1 X20 Watt as directed with starter, electronic ballast switches and necessary fixing arrangement, Size of the board 6 feet X3 feet X 8 inches with 4 Nos flourescent as per the site requirement on roof, wall etc all as directed by Engr-in - Charge.

Supply laying, Rubber matting for LT Panels of size 2mtr x 1mtr x 10mm. Make: Electromat /Jyoti/Dunlop

Supply and fixing fully automatic star -delta starter for submersible pump set of following capacity 40 HP , 415 V , 50 Hz 3 Phase with relay range 36 - 60 Amp, in and including MS fabricated stand made out of 40 x 40 x 5mm angle frame duly grouted in wall, painted 2 coats of synethetic enamel paint over a coat of red oxide for placing starter. Make: L&T Model No. MU-G40, Cat part No. CS90908 or equivalent in Havells/BCH/GE Power

Supply, lowering, jointing, against replacement of unserviceable GI pipe heavy duty 100mm internal dia (3 mtr long with both ends threaded and fitted with heavy duty MS flanges 14mm thick, two Nos groves for submersible cable continuous welded and drilled 4 Nos hole, complete as column pipe including jointing material such as bolts, nuts, washers and rubber gasket etc complete all as specified.

Dismantling and taking out submersible pumps set of 40/41HP capacity and any size from bore well with the help of chain pulley block including dismantling the MS/GI column pipe, and change nuts bolts washers, good quailty ISI marked rubber gasket, lowering the submersible pump set in to borewell after testing including connecting coulmn pipes and cable connections etc, after completion of the work testing of pump set on load to the entire satisfaction of Engr-in-Charge and reading the data complete. Note :- (i) T&P required for raising & lowering, the pumps and pipes will be arranged by contractor and the cost deemed to be included in the unit rate quoted by the contrator for there items. (ii) Small items such as nuts, bolts washers and rubber gasket required will be included in the unit rate for these items.

Supply and fix D-Joint of 150 mm dia in CI/DI pipe line to stop leakage with all necessary items which is required for to stop leakage including necessary excavation and refilling all as specified and directed.

Supply and fix D-Joint of 100 mm dia in CI/DI pipe line to stop leakage with all necessary items which is required for to stop leakage including necessary excavation and refilling all as specified and directed.

HARISH SALES CORPORATION

M/S Sonu Traders