Provision of partition work in certain officers at ICGAS Chennai and Provision of storage shed for MES office at CGRA Thalakancherry Chennai and Provision of false ceiling tilling to building No P 16 AGEs Office at CGRA Meenambakkam under GE (I) (CG

Amount

Supply and fix 12mm thick Frosted toughened Glass with edges polished including Aluminum powder coated frame work for door and partitions etc. with 100x45x2 mm thick box section for alround frame and other middle members both in horizontal and in vertical directions where requried including suitable size aluminium glzing clips or squrae tube, rubber bearing etc for fixing panels of size 2mx2m or as per site requirement complete all as requried and directed.Note :(i)Make of Glass : Saint gobain/Modi Guard/ Glod Fish (ii) minimum thickness of powder coating:50 micron

Supply and fix 12mm frosted toughened glass door with necessary cut outs and holes with Floor Spring Patch set (Consists of Bottom Patch, Top patch, Top Pivot, Bottom Pivot, Floor spring, Corner lock) and including Centre fitting, Side connector, Over Panel Connector, Handle 'H' type 'U' channel, Backer rod Silicon etc complete all as specified and as directed. Note :(i)Make of Glass : Saint gobain/Modi Guard/ Glod Fish (ii) minimum thickness of powder coating:50 micron

Supply and fix 12mm frosted toughened glass polished and fixed with bottom patch, top patch and gap filled with silicon complete all as specified and as directed. ote :(i)Make of Glass : Saint gobain/Modi Guard/ Glod Fish (ii) minimum thickness of powder coating:50 micron

Supply and fix Powder coated aluminium frame for doors, grills, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note :(i) Minimum thickness of powder coating 50 microns.(ii) Make of aluminium frame: Jindal/Hindalco/Indal

Supply and fix Powder coated aluminium window and ventilator shutters fixing type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , anodized alumnium snap beading screws etc complete all as specified and as directed. Note :(i) Minimum thickness of powder coating 50l microns.(ii) Make of aluminium frame: Jindal/Hindalco/Indal

Supply and fix Powder coated aluminium window and ventilator shutters ,side hung type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , anodized alumnium snap beading screws, anodised aluminium fiiting such as peg stays 150mm long (1 no) hinges type B-21 100mm long(2 no), suitable handle (1 no) etc complete all as specified and as directed. Note :(i) Minimum thickness of powder coating 50 microns.(ii) Make of aluminium frame: Jindal/Hindalco/Indal

Supply and fix Plain sheet glass ,ground or obscured or frosted in one side , 4.00 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.Note :(i) Make of Glass : Saint gobain/Modi Guard/Gold Fish

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC Ç'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Supply and fix 100 mm butt hinges extruded aluminum anodised fixed with screws complete all as specified and as directed. Make :Crown/Classic /ESS ESS

Supply and fix 150 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed. Make :Crown/Classic /ESS ESS

Supply and fix 150 mm long aluminium alloy handles Fabricated type complete all as specified and as directed. Make :Crown/Classic /ESS ESS

Supply and fix 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed complete all as specified and as directed. Make :Crown/Classic /ESS ESS

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for Screed bed or bedding layer of mortar 15mm thick of CM 1:6 for laying of floor finishes complete all as specified and as directed.

Material and labour for Rendering 10mm thick in CM 1:3 on fair faces of brick wall such as backing coat in dado/skirting finished even and smooth complete all as specified and as directed.

Material and labour for Premium quality Non skid ceramic coloured tiles (Squase or Rectangular) of size 7-8mm thick area of each tiles exceeding0 .11 Sqm but not exceeding 0 .18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile complete all as specified and as directed..Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Vitrified tiles 10 mm thick (square/rectanguar) polished with light shade ,area of each tile not exceeding 0 .36 Sqm, in floors and wall etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile complete all as specified and as directed..Note :Make of Vitrified tile:Johnson/Khajaria/Somany

Material and labour for Glazed ceramic coloured tiles , Premium quality in vertical surface such as skirting,Dado/Risers of size 350x250x x 7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cementto match with the shade of the tile complete all as specified and as directed..Note :Make of Glazed ceramic tile:Johnson/Khajaria/Somany

Supply and fix GI steel water tubing of bore 15 mm, medium grade, ISI marked including all fittings such as bends, elbows, tees, short pieces, connectors back nuts, diminishing piece, caps plugs and unions etc laid complete laid in floors / fixed to wall and ceiling complete all as specified and as directed. Make:Tata/Jindal/Prakash Surya

Supply and fix GI steel water tubing of bore 20 mm, medium grade, ISI marked including all fittings such as bends, elbows, tees, short pieces, connectors back nuts, diminishing piece, caps plugs and unions etc laid complete laid in floors / fixed to wall and ceiling complete all as specified and as directed. Make:Tata/Jindal/Prakash Surya

Supply and fix 110 mm dia PVC (SWR) pipe single socketed in any length laid in trenches or in floors/fixed towalls complete all as specified and as directed.Make: Finolex/Tru bore /Supreme

Supply and fix 75 mm dia PVC (SWR) pipe single socketed in any length fixed to wall/floors in trenches or in floors/fixed towalls complete all as specified and as directed.Make: Finolex/Tru bore /Supreme

Supply and fix 110 mm dia PVC (SWR) Bends any radius fitted with overall access door complete all as specified and as directed.Make: Finolex/Tru bore /Supreme

Supply and fix 75mm dia PVC (SWR) Bends any radius fitted with overall access door complete all as specified and as directed.Make: Finolex/Tru bore /Supreme

Supply and fix in repairs 110 mm dia PVC (SWR) Junction single (single T) equal or unequal with access door complete all as specified and as directed. Make: Finolex/Tru bore /Supreme

Supply and fix 75mm dia size (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed Make: Finolex/Tru bore /Supreme

Supply and fix Brass chromium plated bottle trap 40mm dia, for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. Make: Waterman/Metro/Gem

Material and labour for Brick work with Fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 in Half brick thick wall complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in CM 1:6 on fair faces of brick wall surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 3mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to get glossy surface and including applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.note:Make of wall putty :JK wall care putty/Birla wall care putty

Material and labour for Preparation of newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed

Supply anfd fix Vitreous china wash down water closet pan (pedestal pattern ),white (excluding fixing bolts flushing cistern and flush pipe ) including connection to drain pipe and to flushing pipe etc and provision of plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices with including 'P' or 'S' trap complete all as specified and as directed

Supply and fix vitreous china wash basin, white flat back size 630 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and as directed.

Supply and fix Waste coupling of PTMT (half or full threaded) of bore dia 32 mm (Minium weight-45gms) complete all as specified and as directed.Make:Prayag/M/S Shakthi Industries

Supply and fix Bib cock 15 mm chromium plated long body complete all as specified and as directed. Make : Marc - moy 1030/ Jaquar - 037

Supply and fix Two way bib cock 15 mm chromium plated long body (fancy type) complete as specified and as directed. Make : Jaquar/Marc

Supply and fix Angular stop cock chromium plated 15 mm dia (fancy type) complete or as specified and directed. Make : Jaquar/Marc

Supply and fix wall mixer chromium plated including telephonic shower (fancy type) complete or as specified and directed. Make : Jaquar/Marc

Supply and fix basin mixer chromium plated 15 mm including 18 inch long braided pouch connection with brass nuts complete or as specified and directed. Make : Jaquar/Marc

Supply and fix Chromium plated shower rose 100 mm dia with swivel joints, including fixing to steel pipe or union complete or as specified and directed. Make : Jaquar/Marc

Supply and fix CP hand shower( health faucet) with 8mm dia and 1000mm long flexible tube with wall hookcomplete or as specified and directed. Make : Jaquar/Marc

Supply and fix in repairs Soap dish brass chromium plated /vitreous china of approximate size 160mm X 160mm X 90mm fixed with and including chromium plated brass screws with wooden plugs complete all as specified and as directed

Supply and fix in repairs Toilet paper holder, brass chromium plated/ vitreous china box type fixed with and including chromium plated brass screws with wooden plugs including cutting recess in wall complete all as specified and as directed.

Supply and fix PVC flexible connection 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.Make:Prayag/M/S Shakthi Industries

Supply and fix PVC waste pipe 32 mm dia of length 900mm complete all as specified and as directedMake:Prayag/M/S Shakthi Industries

Supply and fix brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges including brackets complete all as specified and as directed.

Supply and fix corner glass self made of 12mm thick 250mm radius between flanges of brass chromium plated ''D'' clamps complete all as specified and as directed

Supply and fix cabinet mirror of size600mmx450mmx130mm made with 5 mm thick PVC Sheet ,coloured and fixed to wall inlcluding shleves and shutters topped with mirror fixed in repairs complete all as specified and as directed.Make :Commander/ESS ESS

Supply and fix Anodised aluminium snap grid frame work (size of grid 605 mmx605mm) ceilingcomplete all as specified and as directed. Note:(i)Type of Grid : Armstrong Shilhouette grid .(ii)Minimum thickness of anodisation shall be 15 microns. (iii) Make of aluminiumgrid : Jindal/Hindalco/Indal

Material and labour for Hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G I flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia ,40 mm long complete all as specified and as directed

Supply and fix 12 mm thick gypsum board Panels 600 mmx600 mm suitably placed in false ceilig grid aluminium as per specification complete all as specified and as directed.Make:Armstrong/Gyproc/M/S Gypsum (India) Ltd

Demolition of plain cement concrete in groud floors and pavings (below or above ground level) not exceeding 15 cm thickness including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Material and labour for Plain cement concrete 1:2:4 concrete type B-1 using 20 mm graded stone aggregate as in sub base of floor/hard standing/Path etc. including formwork complete all as specified and as directed.

Material and labour for Preparation of new or previously untreated painted surfaces of steel or iron surface materials of any description not exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over one a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Supply and fix Mild stee; Roof Trusses (framed) trussed purlins crane gantries,rails and fastening and heavy backet framing (Beam, tee, angle, Channel or flat sections) including distances pieces, cleats etc confirming to Fe-410-W (Gde=E-250) Quality=B complete all as specified and as directed.

Removing building material etc., to a distance of 5km , including loading, unloading & stacking at the destination complete all as specified and as directed.Note : One Load = 100cft

Shifting of split type Air conditioner any capacity including supply and fix factory fabricated support suitable to mount out door unit (one pair per AC unit) and duty making holes into the wall for insertion of copper pipe, drain pipe and FRLS PVC copper cable of size 3 crore and making the good the distrubed surfaces complete and including servicing complete unitcomplete all as specified and as directed.

Material and labour for Circuit/ Sub main wiring with two run single core 2.5 sqmm along with of size 1X 2.5 Sq mm single core PVC insulated copper conductor cable (Fire Retardant) in surface/rcessed with non metallic rigid PVC conduit of 20 mm dia complete unit all as specified and as directed. Note:: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii) Two run of 2.5 Sqmm one run of 2.5 sqmm and one run of PVC conduit shall be measured as unit. (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian.Make of PVC conduit :Finolex/Avon plast'Presto plast

Supply and fix Single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps ,240 Volts complete all as specified and as directed . Make:Indo Asian/ABB/L&T

Supply and topping up of gas or filling of gas of split AC with R-22/R-410A/R-32 gas complete all as specified and as directed ..

Material and labour for Suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure steam Crude Everest Non Asbestos Fibre Cement plain Board (E-Board Classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.and the main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid as per IS 14862 complete all as specified and as directed ... Make:Everest Industries Ltd

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed

Excavation in trenches. n. exc 1.5m wide & n.exc 1.5m in depth and n. exc 10 sqm on plan for foundation and getting out in soft/loose soil complete all as specified and as directed.

Material and labour for Vitrified tiles 10 mm thick (square/rectanguar) polished with light shade ,area of each tile not exceeding 0 .36 Sqm, in vertical wall etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile complete all as specified and as directed..Note :Make of Vitrified tile:Johnson/Khajaria/Somany

Taking down shutters of any description of area exceeding 1.0 sqm but not exceeding 2.0 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Demolition of reinforced cement concrete of any description in any position including cutting reinforcement as required to facilitate demolition and removal of debris off the premises outside the MD land complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed..

Supply and fix Rolled mild steel Steel tubular truss pipe as in truss including special shaped washer etc. complete using ERW or induction butt weled tubes confirming to IS 1161 1979 Grade St-240 complete all as specified and as directed.

Supply and fix Mild steel plates, plain or chequerred, 5mm thick or over in thickness in available sizes confirming to Fe-410-W(Gde- E- 250) quality-B complete all as specified and as directed.

Supply and fix Rolled mild steel in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etcconfirming to Fe-410-W(Gde- E- 250) quality-B complete all as specified and as directed.

Material and labour for Brick work with Fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Mild steel TMT bars 5 mm dia and over upto 10 mm dia as in stirrups,spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Steel Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , rough finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for Steel Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for Steel Form work to sides and soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200 mm thick Horizontal or sloping etc for rough finished flat surfaces of concrete completre all as specified and as directed.

Material and labour for Steel Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) for rough finished surfaces of concrete completre all as specified and as directed.

Material and labour for Steel form work to chullah hoods, chajjas, troughs and similar items including edges, for rough finished flat surfaces of concrete completre all as specified and as directed.

Material and labour for Steelf Form work to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantilevers, shelves including supports, etc for rough finished flat surfaces of concrete completre all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete (1 : 1.5 : 3) Type A1 using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete(1 : 1.5 : 3) Type A1 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete(1: 1.5 : 3) type A1 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete(1: 1.5 : 3) type A1 using 20 mm graded aggregate as in Chullah hoods; stairways including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks of capacity upto 1500 litres complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete(1: 1.5 : 3) type A1 using 20 mm graded aggregate as in Chajja etc complete all as specified and as directed.

Material and labour for providing Reinforced Cement Concrete(1 : 1.5 : 3) Type A1 using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Material and labour for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Supply and fix Mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Material and labour for Rendering in CM 1:4, ,15 mm thick on fair faces of brick work surfaces and mixed with WPC as per manufacuture instructions,finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separtely

Supply only Liquid Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Material and labour for Second class hard wood plain, solid , hard wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Factory made 35 mm thick, Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides fitted to chowkats or frames complete all as specified and as directed.

Supply and fix in repair Factory made Second class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided in to square, with plain edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat complete all as specified and as directed.

Material and Labour for Plain cement concrete 1:3:6 type C1 (using 20 mm graded aggregate ) as in hold fast block including necessary form work etc. complete all as specified and as directed.

Supply and fix mild steel small items such as hold fast , stays for rain water pipe , bend straps . support etc.including bolts if required confirming to Fe=290, Gde-E-165 complete all as specified and as directed.

Supply and fix 100 mm butt hinges medium weight, cold, rolled medium teel complete all as specified and as directed.

Supply and fix 75mm butt hinges medium weight, cold, rolled medium steel complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium handles cast type anodised complete all as specified and as directed.

Supply and fix sheet glass 3.00 mm thick ordinary quality and glazing with oil putty and securing pins of area n exc 0.5 sqm in each pane complete all as specified and as directed.Note :Make of glass : saint gobain/modi guard/Gold fish

Supply and fix Mild framed work such as grills, grating etc. with ends of bars or forged into spikes, framed guard bars, barred iron doors, ladders, railing and similar works confirming to Fe 290 Grade E-165 complete all as specified and as directed.

Material and labour for 18/19 mm thick Prelaminated particle board ,exterior grade ,prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame as in pelmets in repairs complete all as specified and as directed.Make:Novopan/Kitply/Century

Supply and fix 5.50mm thick Plain glass for fixing in aluminum door and Window,ventilator etc. complete all as specified and as directed..Note :Make of glass : saint gobain/modi guard/Gold fish

Material and Labour 25 mm thick PCC 1:2:4 type B0 (using 12.50 mm graded aggregate ) as in floors including necessary form work complete all as specified and as directed.

Material and labour for Preparation of newly plastered or unplastered surfaces of walls, chajja, facing and applying two coats of exterior Emulsion Paint (weather Coat) over one coat of water based primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over on coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over on coat of pink primer complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia concealed /surfacein wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with switches/socket/Fan regulator etc as required with modular point wiring cover for one light or fan point controlled by one switch complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex (iii) Modular box and modular frame shall be measured and paid seperately under respective items,

Supply and fix Wiring for Circuit / Submain Wiring of FRLS cable size 2 x 2..50 sq.mm along with earth wire of size 1 x 2.50 sq.mm, Single Core, PVC insulated copper conductor (Fire Retardant) Cable in surface/recessed drawn through and including non metallic rigid PVC Conduit of size 20 mm dia complete all as specified and as directed. Note: (i) Rate quoted shall include for cutting chasing and making good existing surfaces (ii) Three runs of 2.50 Sqmm and PVC conduit shall measured as one unit. (iii)Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. (iv)Make of PVC conduit : Avon plast/ Kon seal / Garware

Supply and fix Wiring for Circuit / Submain Wiring of FRLS cable size 2 x 1.50 sq.mm along with earth wire of size 1 x 1.50 sq.mm, Single Core, PVC insulated copper conductor (Fire Retardant) Cable in surface/recessed drawn through and including non metallic rigid PVC Conduit of size 20 mm dia complete all as specified and as directed. Note: (i) Rate quoted shall include for cutting chasing and making good existing surfaces (ii) Three runs of 1.50 Sqmm and PVC conduit shall measured as one unit. (iii)Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. (iv)Make of PVC conduit : Avon plast/ Kon seal / Garware

Supply and fix Modular switch 6 Amps one way flush type 240v AC complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Modular socket 2 /3 pin 6 Amps flush type 240v AC, 2 Module complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Modular switch 16 Amps one way flush type 240v AC complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Modular socket 2 /3 pin 16 Amps flush type 240v AC, 2 Module complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Stepped type electronic fan regulator flush type , 120 W , 2 Modulecomplete all as specified and directed Make :Legrand/Anchor/Rider

Supply and fix modular white cover plate with frame 1- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 2- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 3- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 4- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular metal flush box for 1/2 Module complete all specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix i modular metal flush box for 3 Module complete all specified and as directed. Make:- Legrand/Anchor/ABB

Supply and fix modular metal flush box for 4 Module complete all specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix sheet steel enclosure with socket plug top and MCBs complete single pole and neutral enclosure with two Pin and earth plug and socket complete with single pole MCB 20 Amp capacity including fixing in walls duly embedded complete all specified as directed. Make:Indo Asian/L&T/Siemen

Supply and fix Wiring for Circuit / Submain Wiring of FRLS cable size 2 x 4.0 sq.mm along with earth wire of size 1 x 4.0 sq.mm, Single Core, PVC insulated copper conductor (Fire Retardant) Cable in surface/recessed drawn through and including non metallic rigid PVC Conduit of size 25 mm dia complete all as specified and as directed. Note: (i) Rate quoted shall include for cutting chasing and making good existing surfaces (ii) Three runs of 4 Sqmm and PVC conduit shall measured as one unit. (iii)Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. (iv)Make of PVC conduit : Avon plast/ Kon seal / Garware

Supply and fix Powder coated Double door Single Pole and neutral 6 way with 200 Amps rated bus bar sheet metal enclsoures for DB when MCBs to be used complete all as specified and as directed. Make:Indo Asian/L&T/Siemen

Supply and fix MCB single pole 5-32 Amps, 240 Volts of rupturing capacity 10 KA C curve complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB 5-32 Amps,single pole and neutral 240 Volts of rupturing capacity 10 KA C curve complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN021C LED20S PSU CDL GR or M/S Wipro Cat Part No D632065 20W-6500K

Supply and fix in repair High Efficiency LED 34 Watts Recess mounting type square(2'x2') flat panel Luminaire suitable for fixing in Armstrong grid ceiling with super bright LED complete with MS clamp ,internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make: Philps model No: RC 380 B L ED 34 S-6500 L 60 W 60 PSU OD S 1 or equivalent price, specification and cat part no in M/S WIPRO

Supply and fix in ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Material and labour for Plain cement concrete 1:4:8 type-D2 (40 mm graded aggregate) as in foundation of columns, filling and mass concrete complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cms thick in excavated soil complete all as specified and as directed

Removing surplus excavated soil to a distance n. exc 50 m and depositing at a level n. exc 1.5m above the starting point complete all as specified and directed .

lakshmibuilders

SK Guha and co

S VENKATESAN

VIJAYALAKSHMI ENTERPRISES