IITJMU/MT/SP-062/2019-20

Amount

Wall Bench (WB - 1) Size: L 2275 mm x W 900 mm x H 900 mm - Work top in 18 ± 1 mm thick Black Granite construction 2.05 Sqm - 750 mm wide storage module with one drawer two shutters 3.00 Nos - Worktop mounted electrical raceway in GI powder coated construction 2.28 Rmt - 6/16 Amp electrical sockets and 16 Amp one way switch 6.00 Nos - Filler Panel in G.I. Construction 2.00 Nos

Wall Bench (WB - 2) Size: L 1800 mm x W 900 mm x H 900 mm - Work top in 18 ± 1 mm thick Black Granite construction 1.62 Sqm - C-Frame Structure in 60 x 30 x 2 mm thk hollow pipe construction 1.80 Rmt - Worktop mounted electrical raceway in GI powder coated construction 1.80 Rmt - 6/16 Amp electrical sockets and 16 Amp one way switch 6.00 Nos - Modesty Panel in G.I. Construction 2.00 Nos - Filler Panel in G.I. Construction 2.00 Nos

Island Bench (IB - 1 - 4) Size: L 5275 mm x W 1500 mm x H 900 mm - Work top in 18 ± 1 mm thick Black Granite construction 7.91 Sqm - 750 mm wide storage module with one drawer two shutters 10.00 Nos - 750 mm wide storage module with two shutters 2.00 Nos - Knee Space without Foot Rest 2.00 Nos - Single piece molded PP sink (L 600 x W 450 x D 315) 2.00 Nos - Worktop mounted three way water tap with swan neck spout 2.00 Nos - Peg Board in Phenolic resin construction with 20 Nos. PP Pegs - 2.00 Nos - Double sided double tier reagent rack with electrical raceway 4.40 Rmt - 6/16 Amp electrical sockets and 16 Amp one way switch 24.00 Nos - Service Pendant1.00 Nos - MS Support 3.00 Nos - Filler Panel in G.I. Construction 2.00 Nos

Wall Bench (WB - 3) Size: L 6220 mm x W 900 mm x H 900 mm - Work top in 18 ± 1 mm thick Black Granite construction 5.60 Sqm - 750 mm wide storage module with one drawer two shutters 6.00 Nos - 750 mm wide storage module with two shutters 1.00 Nos - Knee Space without Foot Rest 1.00 Nos - Single piece molded PP sink (L 600 x W 450 x D 315) 1.00 Nos - Worktop mounted three way water tap with swan neck spout 1.00 Nos - Peg Board in Phenolic resin construction with 20 Nos. PP Pegs 1.00 Nos - Worktop mounted electrical raceway in GI Construction 5.47 Rmt - 6/16 Amp electrical sockets and 16 Amp one way switch 14.00 Nos - Service Pendant 1.00 Nos - MS Support 4.00 Nos - Granite Skirting 1.00 Nos - Close Panel in G.I. Construction 1.00 Nos - Filler Panel in G.I. Construction 2.00 Nos

Coner Bench (CB - 1) Size: L 1180 mm x W 1180 mm x H 900 mm - Work top in 18 ± 1 mm thick Black Granite construction 1.39 Sqm - Corner storage module with one shutter 1.00 Nos - Worktop mounted electrical raceway in GI powder coated construction 2.06 Rmt - 6/16 Amp electrical sockets and 16 Amp one way switch 4.00 Nos - MS Support 4.00 Nos - Filler Panel in G.I. Construction 2.00

Wall Bench (WB - 4) Size: L 1525 mm x W 900 mm x H 900 mm - Work top in 18 ± 1 mm thick Black Granite construction 1.37 Sqm - 750 mm wide storage module with one drawer two shutters 2.00 Nos - Worktop mounted electrical raceway in GI Construction 1.53 Rmt - 6/16 Amp electrical sockets and 16 Amp one way switch 4.00 Nos - Filler Panel in G.I. Construction 2.00 Nos

Glassware Storage Cabinet (GSC) Size: L 1000 x D 450 x H 1830mm Storage Cabinet in GI Powder coated construction, cabinet will have 5 nos. adjustable shelves comparting 6 compartments, double skin Glass doors with SS Handles.

Emergency Safety Shower Floor standing, overhead emergency shower with eyewash unit, main frame in S.S fabrication

Low Const. Volume type Bench Fume Hood(Size: L 1200 x D 915 x H 2300 mm) (For AC Labs) Consisting of following : (As specified in Annexure - II) Fume Hood Superstructure Fume Hood Worktop Service Valves Electrical Fittings Controls Fume Hood Understructure Fume Hood Under-Cabinet (General Storage Purpose) Accessories

Exhaust Fan (315 mm Dia) - one fan for 1 No 1200mm wide Fume Hood - Single piece molded UV treated chemical resistant SISW direct driven centrifugal fan in PP constuction with suitable stand in MS powder coated construction, CFM 400 to 500 - Corrosive resistant PP Impeller with extra strength,high efficency, properties which produces lower noise and power consumption. - Drive - 1.0 HP, 1400 RPM, 415V, 50Hz., TEFC Class B insulation induction motor with IP55 enclosure, in Non- FLP const. - 16A, 3Ph MCB for Fan - Legrand or eq. Make - DOL Starter for Motor. - Ducting (1 Lot)

Fume Hood Superstructure consisting of - Structure frame in 2.0mm thick GI construction - Inner lining, rear baffles and top baffles in 6mm thk. Phenolic resin construction - Outer panels in 1.2mm thick GI construction. - Aerodynamic Shape front posts, in GI construction - Flip-on type Airfoil in 1.6 mm thick SS construction - Streamlined shaped exhaust duct collar in PP const. - Combination type, frameless design sash in toughened glass const. with full length sash handle in anodized Al const. - Sash movement mechanism with counter weight. - Twin LED tube type light with fittings

Fume Hood Worktop In telephone black natural granite construction, having raised rails on all four sides, with 1 No. oval shaped cup sink, in PP const., on left rear side.

Service Valves Having body in forged brass const., extended spindle in Aluminum construction, color coded knobs in plastic const. angular shaped serrated nozzles, in epoxy coated forged brass const. 1.5mt. long flexible tubing with end fittings for following services: Services Tube Construction Compressed Air - PU-4 Vacuum - SS braided Teflon Hose Nitrogen - PU-4 Potable Water - Nylon braided PVC Hose

Electrical Services with internal wiring (all in non-FLP const.) - Controller for Blower & light (Touch Pad) - 16A, 2 Pole MCB - Legrand or eq. Make - 5/15A 3-pin Socket with switch/ MCB - Legrand or eq. Make

Controls Air velocity Monitor with low air alarm, Model AFA/1000 TEL - UK Make

Fume Hood Understructure Fabricated out of heavy gauge rectangular shape hollow pipes in MS construction, duly finished with corrosion resistant specialty coatings.

Fume Hood Under-Cabinet (General Storage Purpose) Detachable design general purpose twin cabinets fabricated out of GI sheet, consisting of, - Special arrangement for air ventilation inside the cabinet - Twin doors in double wall const. - Flushed type recessed handle. - 1 No. removable shelf. - Recessed base frame in heavy duty GI const. - Twin castors for easy removal of the cabinet.

Accessories: 200 mm dia. Duct damper in PP const. complete with pre drilled flanges on both sides, manual operation handle and extended spindle, suitable for motorized drive.

Accessories: Ceiling Enclosure Panels in GI const; duly powder coated

Accessories: Scaffold Grill (1030 x 750mm) in Vertical rod design, fabricated out of 12.0mm dia., Epoxy rods, having 150mm pitch between two rods.

Citizen Industries