| 1 | Dismantle, Transfer, Shifting and Installation, Commissioning, performance run of GSR Plant and Machinery | Design, Dismantle, Transfer, Installation, Commissioning, Performance run of GSR Plant and Machinery (15 TPH) Mechanical Work at near by location ( Washing Section, Drying Section, Screening Section, Packing Section, Boiler unit) | 1 | Set | Nagda@SSL | 120 |
| 2 | All Machinery Maintenance, Repairing and Colour work | All Machinery Maintenance, repairing and colour work after dismantled from existing plant - Apoxy Coated | 1 | Set | Nagda@SSL | 120 |
| 3 | | Earth work in excavation by mechanical means (Hydraulic excavator) / Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift to 1.5m, disposed earth to be levelled and neatly dressed. All Kind of soil. | 430 | Cum | Nagda@SSL | 120 |
| 4 | Providing and laying in position cement concrete. All work upto Plinth level 1, 3, 6 1Cement, 3Coarse sand, 6graded stone aggregate 20mm nominal size | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of cantering and shuttering - all work upto plinth level 1 3 6 (1 cement 3 coarse sand 6graded stone aggregate 20mm nominal siz | 60 | Cum | Nagda@SSL | 120 |
| 5 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level in cemetn sand mortar 1, 3 1Cement 3Coarse sand | provding and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1 3 (1cement 3coarse sand) and making good the joints and cost of plasticizers (if required) excluding the cost of centering, shuttering and reinforcement M20 grade nominal mix/ design mix PWD BSR 2022 Add extra for providing richer mixes respectively at all floor levels Providing M35 Grade concrete by using cement as per codal provision instead of M20 grade design mix. | 297 | Cum | Nagda@SSL | 120 |
| 6 | Providing and fabricating reinforcement for RCC work | Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete upto0 floor V level. (Orginal produce who manufacture billet directly from inron ores and roll the billet to produce steel confirming to IS 1786) Thermo - Mechnically treated bars (Confirming of relevent IS Code) | 15,000 | Per Kg | Nagda@SSL | 120 |
| 7 | Centering and shuttering with plywood or steel sheets | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of form work for foundation, footing, strap beam, raft, bases of foundation etc. | 760 | Sqm | Nagda@SSL | 120 |
| 8 | | Structural steel work riveted, bolted or welded in built-up sections, trusses and framed work, including cutting, hoisting (Height upto 10m), fixing in position and applying a priming coat of approved steel primer all complete. | 65,000 | Kg | Nagda@SSL | 120 |
| 9 | Providing Non-asbestos high impact polypropylene reinforced cement 6mm thick corrugated A C Sheets | Providing non-asbestos high impact polypropylene reinforced cement 6mm thick corrugated A.C. sheets (As per IS 14871) roofing upto any pitch and fixing with polymer coated J or L hooks, bolt and nuts 8mm dia G.I. plain and bituman washer or with self driling fastener and EPDM washer etc complete excluding the cost of purlins, rafters and trusses corrugated sheets and including cutting to size and shape wherever required. | 4,650 | Sqm | Nagda@SSL | 120 |