Sub Work. Providing external electrification to the Restaurant and Toilet buildings in Amenity Node in Kirumampakkam Lake at Puducherry.

Amount

Supplying and fixing of following ways surface / recess mounting, vertical type, 415 V, TPN MCB distribuition board of sherrt steel, dust protected, duly powder painted, inlusive of 200 A tinned copper bus bar, common netural link, earth bar, din bar for mounting MCB'S (but without MCB,S (but without MCB's and incomer ) as required. (note : Vertical type MCB TPDB is normally usd where 3 phase utlets are required) - 4 way (4 + 12), double door.

Supplying and fixing Cable End Box (Loose wire Box) (IP 43) suitable for tripple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface / recess, complete with testing and commissioning etc .as required.

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. - Single Pole.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc .as required. - Triple Pole.

Supplying and fixing following rating, three pole, 415V, miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc as required - 63 A Make: Legrand/Polycab/Sncab.

Supplying and fixing following rating, double pole, 240 V, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required - 100 A.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc.as required.

Supply of 31/2C x 50sqmm PVC/XLPE sheathed armoured aluminium U.G cable- 1.1KV grade. Make:Finolex/ Polycab/ Paragon/ Havells

Supply of 31/2C x 35sqmm PVC/XLPE sheathed armoured aluminium U.G cable- 1.1KV grade. Make:Finolex/ Polycab/ Paragon/ Havells

Supply of 2 x 10sqmm PVC sheathed armoured aluminium U.G cable- 1.1KV grade. Make:Finolex/ Polycab/ Paragon/ Havells

Supply and drawing of 2.5 sq.mm 3 core flexible power cable Make: Legrand/ Polycab/ Sncab

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc.as required - Upto 35 sq.mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required - above 35 sq.mm and Upto 95 sq.mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC / HUME / METAL pipe as required - above 35 sq.mm and upto 95 sq.mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X50 sq.mm (28 mm).

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X35 sq.mm (32 mm).

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 2 X 10 sq.mm (19mm).

Supply, Installation, testing and commissioning of 415V cubical type, fully compartmenalised, floor mounted type EB metering panel fabricated with 14/16G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with welded & bolted design and all incoming & outgoing switch gear as per the following. Suitable aluminium busbars, bus couplers, control wiring, control MCBs INCOMER: 100ATPN Fuse Cut-out with neutral link: 1 Set, Outgoing: a) Three phase Energy meter as per PED requirement - l No. b) 1 Set - 3 phase supply consists of 1 No. 100A, TPN FSU with HRC fuses, c) 100A 4P MCB - 1 No.

Supply, Installation. testing and commissioning of 100A 4P on load Auto Transfer Switch wall mounted panel with ON delay Timer, Auxillary relay/ contactor, single phase preventer, control MCB's, ON/OFF push buttons, phase indications, ON/OFF/TRIP Indication lamps etc.

Supply, installation, testing and commissioning of 30KVA DG Set with engine delivering 38.5BHP at 1500RPM under NTP conditions complete with standard accessories coupled to make standard design alternator rated at 30KVA, 3 phase, 4 wire, 50Hz, 0.8PF (lag), mounted on a common iron base frame, Suitably rated 1 no. Battery with leads, Suitable Silencer, fuel tank of 70 liters, Standards Manual Control System, Set of AVM pads & Composite type acoustic enclosure with control cable.

Supply, Erection, Testing and Commissioning of 50W Heritage Decorative Post Top luminaire made up of Die cast aluminum with Polycarbonate protector sealed on the body with integrated lense for uniform light distribution electrical class - I. Ingress protection of IP65, Impact Resistance of IK08, CRI>70. The luminaire shall have a CCT of 3000K and driver efficiency >85%. Body Color Black with golden embellishment and warranty of 5 Years. Imperial Minimum Wattage: 50W LED. Make: KLite/Kesslec/Neri/Bajaj and Pole specification of 3M height Decorative Tubular Lighting Pole designerd for 50m/Sec wind velocity as per IS 875, part-3: 1987 made out MS Pipe sections suitable to mount heritage post top luminaire. The Pole made out of MS Pipe Ø 88.9mm x 2.6mm thick (Grade YST 210) extends from the square base plate 200mm x 200mm x 12mm thick having suitable holes for bolts at the bottom of poles for erection above ground level. The pole sections are welded using special v groove technique by certified welders using high end MIG welding processes. Pole made of steel grade YST 210 / E250. Built-in control Box with cast aluminium service door and safety rope. The control gear tray is prewired with MCB, terminal connectors for loop-in /loop-out arrangment. Baseplate made of stell grade E250 & foundation bolt of grade 4.6. The surface of the pole shall be finished with Zinc rich primer coat & pure polyester powder coating of epoxy zinc phosphate primer followed by the enoironmentally stable Polyurethane based paint. The Pole Should be in Jet Black Colour, Circular Lighting Pole - Ø89 Series, Ht.3000 Make: Klite/Kesslec/Neri/Fenit/Baja.

Erection of metallic pole of following length in cement concrete 1:3:6 (1cement :3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc.as required - above 4.5 meter and upto 6.5 meter.

Supply, transport and fixing of 20W LED Outdoor type gate light Luminaire input voltage range of 100 to 270 volts AC, power factor >0.90, high power LED's having efficacy 90 lumines / watt and junction temperature < 85 degree centigrade of IP 65 with optics, total harmonic distortion less than 15% at 110 Volts AC, 50000 Hours lifetime, driver efficiency > 90% etc., complete with 3 years on site warranty of makes Philips /Wipro or equivalent. including cost, conveyance of all materials to site and labour charges for all operations etc., Make: Philips /Bajaj/ Havels/K-Lite.

Supply & Laying of Potential Earth Electrodes Model STANDARD PS53C 48mm dia, wall thickness 3.25m, terminal size :32 x 10 mm, terminal hole dia 12 mm, hot dip galvanized 80 to 100 microns, 3 meter long, pipte inner space filled with high conductive material, including 2 bags (25kg per bag) of Earth Life Compound, as IS 3043. Base Metal :IS marked branded miled steel pipes.

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip earth electrode , including connection / terminating with G.I. nut , bolt, spring , washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of G.I.nut bolt & spring washer spached at 50mm).

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75cm deep) and refilling etc.as required -

Supply of 30' RCC Pole.

Erection of 30' RCC pole in cement concrete foundation 0.45X0.45X1.0 Mts and coping 0.45X0.45X0.5 mts with ratio 1:3:6 using 20mm HBG metal including cost of concreting meterials such as cement, jelly, sand etc., Excavation of pit and refilling.

Supply of three phase L.T 4 feet cross arm.

Erection of three phase L.T 4 feet cross arm.

Supply of F clamp.

Fixing of F clamp in the poles for 11/22 Kv over head line.

Supply of MS bolts and nuts.

Supply of L.T. stay set complete with rod, bow, 9" x 9" x 6mm thimble and guy shakle insulator.

Erection of HT stay set complete in cement concrete ratio 1:3:6 (One Cement: 3 coarse sand : 6 graded stone addregate 40 mm nominal size) foundation including excavation and refilling as required.

Supply of L.T. pin insulators with GI pin.

Erection of L.T. pin insulators with GI pin.

Supply of CI Knobs.

Erection of CI Knobs.

Supply of ACSR conductor of 7/2.59 Sq.mm diameter including binding etc., as required.

Erection of ACSR conductor of 7/2.59 Sq.mm diameter including binding etc., as required.

Supplying and fixing of light class G.l.pipe of 100 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable as required.

Labour for cutting and removing of tree for extension of OH Iine.

Selvaraj Electricals