S/R TO RB JUDGE HOUSES UNDER MTC. BOOTH SECTOR 24, CHANDIGARH (MISC WORK IN HOUSE NO. 3413 AND OTHER JUDGE HOUSE)

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange f1Xed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling f1Xed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of POP to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c:Jc, includingjointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound ,jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : POP false ceiling

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm

Providing and fixing bright finished Stainless Steel 100 mm mortice latch set and lock with 6 levers and a pair of S.S.finish lever handles of GODREJ make as per approved sample by Worthy H'nble High Court Building Commeette with necessary screws etc. complete.

Providing and fixing bright finished Stainless Steel 100 mm mortice Baby latch with one dead bolt and a pair of lever handles of approved quality of GODREJ make as per approved sample by Worthy H'nble High Court Building Commeette with necessary screws etc. complete.

Providing and fixing bright finished stainless Steel Heavy duty HANDLE D shape R65 of approved brand and quality of make as per approved sample by Worthy H'nble High Court Building Commeette with necessary screws etc. complete. Size =150mm or 6"

Providing and fixing bright finished stainless Steel Heavy duty HANDLE D shape R65 of approved brand and quality of make as per approved sample by Worthy H'nble High Court Building Commeette with necessary screws etc. complete. Size =125 mm or 5"

Providing and fixing bright finished stainless Steel Heavy duty TOWER BOLT of approved brand and quality of make as per approved sample by Worthy H'nble High Court Building Commeette with necessary screws etc. complete. Size =300 mm or 12"

Providing and fixing bright finished stainless Steel Heavy duty TOWER BOLT of approved brand and quality of make as per approved sample by Worthy H'nble High Court Building Commeette with necessary screws etc. complete. Size =200 mm or 8"

Providing and fixing bright finished stainless Steel Heavy duty G-Hook of approved brand and quality of make as per approved sample by Worthy H'nble High Court Building Commeette with necessary screws etc. complete. Size =150 mm or 6"

Providing and fixing 12mm thick toughened glass over fixed portion or glazed shutter including the cost of nails, putty etc. complete in all respect to the entire satisfaction of Engineer-in-charge.