Repair/Maint of pumping system, Switchgear, Pipe Line and Valves at JNE area and External Electric Supply, External Water Supply and allied works under GE (Utilities) Udhampur

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil. Complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested. Complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point. Complete all as specified and directed by Engr-in-Charge.

Taking up or down old unseviceable GI pipe of size 100 mm dia including all fittings complete all as specified and directed by Engr -in -charge.

All as per ser item 04 here-in-before but of 80 mm dia . Complete all as specified and directed by Engr-in-Charge.

All as per ser item 04 here-in-before but of 50 mm dia . Complete all as specified and directed by Engr-in-Charge.

All as per ser item 04 here-in-before but of 40 mm dia.Complete all as specified and directed by Engr-in-Charge.

All as per ser item 04 here-in-before but of 25 mm dia. Complete all as specified and directed by Engr-in-Charge.

All as per ser item 04 here-in-before but of 20 mm dia. Complete all as specified and directed by Engr-in-Charge.

Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc. Complete all as specified and directed by Engr-in-Charge.

All as per ser item 10 here-in-before but of 100 mm dia. Complete all as specified and directed by Engr-in-Charge.

All as per ser item 10 here-in-before but of 80 mm dia. Complete all as specified and directed by Engr-in-Charge.

All as per ser item 10 here-in-before but of 50 mm dia. Complete all as specified and directed by Engr-in-Charge.

All as per ser item 10 here-in-before but of 40 mm dia. Complete all as specified and directed by Engr-in-Charge.

All as per ser item 10 here-in-before but of 25 mm dia. Complete all as specified and directed by Engr-in-Charge.

All as per ser item 10 here-in-before but of 20 mm dia. Complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge.

Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore. Complete all as specified and directed.

Supply and fixing in replacement of cast iron non return valve, conforming to IS-5312, suitable for 80 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge.

M&L for Monoblock pumpset 0.5HP self priming suitable for working at single phase 230Volts,suction/delivery 25 X 25 ,head range 10-34 mtr ,40 LPM complete all as specified and directed.

S&F of Gun-metal, globe or gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge.

All as per ser item No 22 above but upto 40 mm bore. Complete all as specified and directed by Engr-in-Charge.

All as per ser item No 22 above but upto 25 mm bore. Complete all as specified and directed by Engr-in-Charge.

All as per ser item No 22 above but upto 20 mm bore. Complete all as specified and directed by Engr-in-Charge.

All as per ser item No 22 above but upto 15 mm bore. Complete all as specified and directed by Engr-in-Charge.

M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pole & stay complete as specified and directed.

M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg. Complete all as specified and directed by Engr-in-Charge.

Material and labour for taking down by scraping and preparation the surface of the header approx 6 mtr long with sluice valve and NRVs at pump houses, OHT including repainting one coat of super quality of black enamel paint with one under coat of primer , etc complete all as specified and directed.

Supply and fixing in replacement of cast iron sluice valve of size 200 mm (PN 1.6) (ISI Marked) with iron wheel head, both end flanged, stainless steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv complete all as specified and directed by Engr-in-Charge.

All as per item No 31 here in before but size 150 mm dia. Complete all as specified and directed by Engr-in-Charge.

All as per item No 31 here in before but size 100 mm dia. Complete all as specified and directed by Engr-in-Charge.

All as per item No 31 here in before but size 80 mm dia. Complete all as specified and directed by Engr-in-Charge.

M&L for repair of automatic star- delta starter of capacity 40 - 60 HP with replacement of Phase preventer, Contactor, Timer Switch, Indicators, Start- Stop as push buttons, Thermal Overload relay, MCBs, fuse, etc Complete all as specified and directed by Engr-in-Charge.

All as per ser item 35 here-in-before but of capacity 10 to 30 HP. Complete all as specified and directed by Engr-in-Charge.

M&L for repair of automatic star- delta starter of capacity 75- 100 HP with replacement of Phase preventer, Contactor, Timer Switch, Indicators, Start- Stop as push buttons, Thermal Overload relay, MCBs, fuse, etc as per requirement. Complete all as specified and directed by Engr-in-Charge.

S &F in replacement of APC/UPS. Model 3000 VA,make as per sample complete all as specified and as directed by Engr -in charge.

S &F in replacement of battery 12 Volt,18 Ah of lift ,make as per sample complete all as specified and as directed by Engr -in charge.

S &F in replacement of rescue /emergency alaram system with speaker, ,make as per sample complete all as specified and as directed by Engr -in charge.

M&L for carrying out servicing/ Calibration of APC/UPS with battery 12 Volt 18 Ah,Model 3000 VA, ,make as per sample complete all as specified and as directed by Engr -in charge.

S & F in replacement of Battery 12 V 180 Ah Code: FXPO MHD 1800 complete all as specified and as directed.

M & L for fixing water level indicator sensor based,water level shown at intervals of 10%, that is 40-50%,70-80%( for water level low/high) charts for water used,received etc for suitable for a depth of sump/tank height less than 3 Mtr (10Ft) and the eqpt includes level sensor,wireless transmission unit,battery back up and other accessories such as fitttings of panel,necessary elecric connection to sensor complete all as specified and as directed.

M & L for installing water app gateway it includes lot sim, transmittor& reciever unit, battery back up and other accessories for Complete all as specified and directed by Engr-in-Charge.

S& F in replacement of Pop Up sprinklers having radius of throw 20 meters andf flow minimum 1.2 LPS at an operative pressure 04- to 6 Kg/Cm². The sprinkler shall be impact driven rotatory with provision for adjusting at any degree of rotating having 01 inlet 20mm pop up stoke,sellf flushing with pop up shield made of virigin grade engineering, plastic body , sprinklewr shall be non corrodible, heavy uty coimplete all as specified and directed by Engr- in -Charge. Make : Rain bird 8005/Getech/Globe.

Supply and fixing for prepration of header by MS ERW pipe of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 01 nos inlets (01x 100 mm ) from pump side and 04 outlets from distribution side ( 2 x 100mm, 2x 80mm dia) dia MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer all as specified and as directed. Complete all as specified and directed by Engr-in-Charge.

(a) S&F SELF POWERED Numerical Relay for protection of 11 KV RMU . (b) S&F in repair gas tank and gas pressure indicator of 11 KV RMU including following specification :- (i) Gas tank filled with insulating gas SF-6 used for insulation and arc-quenching corrosion resistant steel hermetically sealed, maintenance free operates at 1-3 bar, made of stainless steel and has a minimum thickness of 2.5mm. it has as IP67 protection index and can withstand and internal overpressure of at least 2.2 bars. The tank also has a bursting pressure of at least 5.5 bars ensuring consistent performance. (ii) Gas pressure indicator Monitors gas pressure to ensure safe and optimal operation electronic type, with clear markings (greet/safe, red/unsafe). alarm integration for leaks or pressure deviations both ensure reliability, safety and efficiency in gas -insulated switchgear systems. Complete all as specified and directed by Engr-in-Charge. Note:- All maintenance and replacement of above equipment/part will be carried out by OEM only.

S&F LED street light fitting withlens, 90watt,230 V,AC outdoor type with high pressure die cast alum housing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K. lumen efficacy not less than 110 lumen/watts, complete all as specified and directed by Engr-in-Charge. Note :- Necessary fixing authority including reducers may be included in rate. Make- Wipro/Philips, Surya, Polycab,HPL, Orient,Crompton, Halonix, Havells

S&F LED street light fitting withlens, 60watt,230 V,AC outdoor type with high pressure die cast alum housing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K. lumen efficacy not less than 110 lumen/watts, complete all as specified and directed by Engr-in-Charge. Note :- Necessary fixing authority including reducers may be included in rate. Make- Wipro, Philips, Polycab, Havells.

Post top lantern, LED, type 40 watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, complete all as specified and directed by Engr-in-Charge. Make-Wipro, Philips,Polycab, Havells.

LED bollard lights of 10 watt capacity including taking down existing unserviceable garden lights of any type/capacity, complete all as specified and directed by Engr-in-Charge. Make:-Wipro,Philips, Polycab, Havells.

Repair/replacement of car washer and 2 HP motor by removing of all nuts and bolts and repair/replacement of nozzle of 175 PSI pressure, replacement of 20 mtrs outlet & 05 mtr inlet, repair/replacement if car washer cylinder, cylinder linear, cylinder head pressure valve, including inlet and outlet valve, checking the pressure with pressure gauge, refilling of required oil level, replacement of spray gun, complete all as specified and directed by Engr-in-Charge Note -: All spare and parts other than above will be including in the same job like, washer nuts, bolts, oil seals, gaskets, cables, wire etc and reassembling of all spare and parts with satisfactory testing of washing pump and motor.

S&F monblock pumpset, 1.5 HP, single phase, 220 volts, size 50 mm x 40 mm, Material: cast iron, head range: 12.8-17.6 mtr, Discharge: 4.15 lps, Class A, 2 pole, S1 duty type, speed : 2900 RPM, suface finish paint coated complete all as specified and directed by Engr-in-Charge. Make: Kirloskar, Crompton Greaves, KSB

M&L for pressure booster water pump 0.5HP suitable for working at single Phase, Rated voltage, 220V, 50Hz, AC power supply, head range 06 to 28 mtr, Max 34 LPM, copper winding (insulation class 'B') with IP 44, with accessories such as Danfoss switch, Y strainer, theramal over load protection, complete all as specified and directed by Engr-in-Charge Make:- Kirloskar,Model No K-Booster or equivalent

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cabale with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sqmm 2 core in service connections complete all as specified and directed by Engr-in-Charge Make: Havells, Polyab, Plaza

PAUL TRADERS (BID ID -3240411)

VIRINDER SINGH (BID ID -3239437)

SHARMA SALES CORPORATION (BID ID -3251545)

BARU ENTERPRISES (BID ID -3244699)

FANGALIA TRADERS (BID ID -3244626)

PREM NATH KHAJURIA AND SONS (BID ID -3244102)