16/E.U.D.C.-Talkatora/2025-26

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj, Lucknow to work site/J.E. dump store.

S.T. Pole 11 Mtr. Long.

33 K.V. XLPE Cable Al. 3X300 Sq.mm.

O/D Jointing kit for 33 K.V. 3X300 Sq.mm. XLPE cable.

St/Th Jointing kit for 33 K.V. 3X300 Sq.mm. XLPE cable.

Top Channel 125X65mm 3200mm (10.70kg/M)

Dropper Channel.

T Off Channel 125X65mm 3200mm (10.70kg/M)

M.S. Angle Iron 65X65X6 mm. bracing with 4 clamp.

M.S. Earth Road (2540X20 mm.)

33 K.V. Polymeric Pin & Pin Insulator with Nut & Bolts.

ACSR Panthar Conductor.

HDDE Pipe 140 mm.

33 K.V. G.I. Stay set. 20X1800 mm.

Fabrication, Erection of Double Pole Structure on 11 mtr. long STP with necessary clamps, accessories required including fixing of Top Channel 125X65X6 mm. (2240 mm long) 01 Nos., Dropper Channel 100X50 mm. (2028 mm long) 01 Nos. with arrangment of fixing of 06 nos. 11 K.V. Pin Insulators. Cross Bracing set of MS Angle 01 Nos. Grouting of 02 Nos of STP with cement, sand and brick ballast in ratio 1:4:8 (2X0.9 Cu.Mtr) and making plinth upto the height of 300 mm from ground. Painting of poles with primer and red oxide enamel paint as per RESPO specification complete in all respect. Earthing of both the poles. (STP, Top Channel, Dropper Channel Pin & Pin Insulator provided by department and other required material provided by contractor.)

Laying of single circuit underground 33 K.V. XLPE Cable 3X300 mm2 in pakka road by drill method as per digging of earth pit of Size 0.60x0.90 with provision of Sand filling and Cover with side brick and Top with Stone pad. (33 K.V. XLPE Cable will be provided by deptt. only)

Hoisting of 11 K.V. XLPE cable 3X300 mm2. along with 6" dia G.I. Pipe 03 meter long with required clamp etc. (6" dia G.I. Pipe 03 meter long with required necessary all material provided by contractor)

Grouting and nozzeling of Stay set complete of size 20X1800 mm. with cement, sand, brick-ballast 1:3:6 as per RESPO specification. (All the material will be arranged by the contractor)

Stringing & sagging of 3 phase 3 wire 33 K.V. New line on ACSR Panthar conductor as per RESPO specification and direction on E/I. Conductor shall be supplied by department.

Providing and fixing of Danger Plate/Board of size 380X250 mm. having 16 gauge M.S. Sheet composed of words "Danger" of word height 35 mm. in english language and ^^[krjk** in hindi language, work height 45 mm. and two Human skulls above two bone shows in cross of size 70 X80 mm. shown symmetically. All Plate/Board paint with red enemelled paint on white back ground with required all clamps, Nut & Bolt and other material required for work. (All material provided by contractor at his own cost)

Note :- 1- All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2- One carriage including loading/unloading from dump site to pit site is included in scope of work. 3- During execution of work all risk will be of the contractor. 4- Contractor will provide all T & P, vehicle and man power. 5- All the old and used material should be taken on book. 6- The quantity may be vary ±10%. 7- GST will be paid extra as legally applicable. 8-The work should be carried out under Bussiness Plan 2025-26. 9-The work will be done as per norms of UPPCL/RESPO.

SYED TRADERS (BID ID -5542677)

SIDDHI ENTERPRISES (BID ID -5543218)