Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹57.0 Laccepted-aoc | ₹57.0 L | accepted-aoc |
Tender Value
₹60.4 L
EMD Value
₹1.2 L
Closing Date
23 May 2026, 10:00 pmClosed
Public Works Department
Development of road from Bannikuppe village to Sri Gurukula trust in bannikuppe Gramapanchayath, Ramangara Taluk
PWD/2026-27/RD/WORK_INDENT35849/CALL-2
PWD/2026-27/RD/WORK_INDENT35849/CALL-2
Open
Roads
PWD Division Office Ramanagara
6 documents required · 6 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng N/A (not less than 50% of electrical works) n any one year
To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) (b) Mandating satisfactory completion(atleast 90% of the contract value) as a prime contractor for at least one similar such as road work to an extent of 50% of the cost of the work of value not less than Rs.30.18 Lakhs
To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) (c)Executed in any one year,the following minimum quantities of work (usually 80% of the peak annual rate of construction) 1)Earth work /embankment/subgrade-865.00 Cum 2) DBM/ BC/BM/SDBC/Mix seal/Seal coat- 11400.00 sqm 3)WMM/WBM -890.00 Cum 4)TMT Steel-1.08 tonne
Tenderers who meet the above specified minimum qualifying creteria will only be qualified if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under assessed available tender capacity is qual to AxNx2.5-B,where A is equal to maximum value of civil engineering works executed in any one year during the last five years(updated to 2026-27 price value) taking into account the completed as well as works in progress.N is equal to number of years prescribed for completion of the works for which tenders are invited.(i.e, 6 months) B is equal to 2026-27 price level, of existing commitments and on going works to be completed during the next i.e,6 months) The statements showing the value of existing commitments and ongoing works as well as stipulated period of completion remaining for each of the works listed should be counter signed by the employer incharge not below the rank of an executive engineer or equalent.
Liquid assets and /or availability of credit facilities of no less than Rs. 18.11 Lakhs (Credit lines/ letter of credit/ certificates from nationalized/scheduled banks for meeting the fund requirement etc)
Income Tax Balance sheets and Annual turnover certificate issued by the CA with membership NO with UDIN in the last five years (i.e. 2021-22 to 2025-26) (a) Achieved in at least two financial years a Minimum financial turn over (in all classes of civil engineering construction works only) of Rs.60.36 lakhs
List of existing commitments and ongoing works
List of works for which tenders already submitted
Contractors should be registered with KPWD Class III Registration and above
₹1,510
₹1.2 L
23 May 2026
15 May 2026
25 May 2026
20 May 2026
Development of road from Bannikuppe village to Sri Gurukula trust in bannikuppe Gramapanchayath, Ramangara Taluk
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...
Surface Drains in Soil - Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated mate...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...
Water Bound Macadam - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand ...
Tack coat on Granular surface treated with primer - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...
BASES AND SURFACE COURSES (BITUMINOUS) - Mix Seal Surfacing - Providing, laying and rolling of Close-Graded Premix Carpet (OGPC) surfacing material by Manual Means of 20 mm ...
Seal Coat - Providing and laying Seal Coat using VG30 Bitumen by Manual means by sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as pe...
Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw 3 35849 spl.doc
Tender Document • 0.26 MB
Download all tender documents and submit your bid