PROVN OF CERTAIN REVENUE WORKS AND MINOR WORK AT 71 OMP KHALSAR UNDER GE PARTAPUR

Amount

M&L for surface excavation n.exc. (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/dense soil.

M&L for excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc. or shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10sqm on plan and n.exc. 1.5m in depth and getting out in hard/dense soil.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete.

S&F roof trusses Fe 410 W grade E 250 quality A (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incliding distance pieces, cleats etc

M&L second class softwood plain fillets,rectangular in section, clean swan, secured with nails exc 13 and n.exc 25

M&L for painting to wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc complete

M&L Plywood 6 mm thick grade BWR, type BB fixed with screw to timber frame work

S&F 0.63mm thick corrugated galvanised mild steel sheeting with two corrugations side lap, fixed with L or J type hooks and washers in roofs walls etc with grade of zinc coating 275 complete all as secified and directed by Engr-in-Charge

M&L for Pre-cast cement concrete Type C1, 1:3:6 (20mm stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in CM 1:6, complete.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:6

M&L for rendering 15mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:4 including with using watre proofing compound.

M&L for rendering 5mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:3 on ceiling.

M&L for 100mm thick Cement Concrete 1:4:8 type D2 using (40mm graded aggregate as in sub base.

M&L for 40mm thick Cement Concrete 1:2:4 type B1, (20 mm graded aggregate) as in flooring

M&L Screed bed or bedding layer of mortar 15mm thick in Cement Mortar 1:6 for laying floor finishes.

M&L for Non Skid glazed ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing 10mm thick in CM 1:3

S & F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheeets for top rail locj rail and bottom raiol in either side and as gap insert for top rail and bottom rail, panelling ofg plain colour PVC sheets to be foitted in the MS frame wwelded/sealed to the stiles and rails with solvent cement all as specified and shown on drg.

S&F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed.

S & F 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S & F butt hinges 100mm, medium weight, cold rolled mild steel and fixed.

S & F 150mm mild steel pressed handles, oval type, stove enamelled black.

S&F 30cm long hold fast conforming to Fe.290. Gde-E-165 of Sectiion 25x6mm

S & F 3.00mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m in each pane.

S&F Stainless steel WC seat Orissa pattern of size 580mm x440mm and fixed

S&F PVC valveless, syphonic action type 10.00 ltrs flushing cistern, low level white with inlet, ball valve, float and handle including brackets.

Supply and fix in repair CP toilet paper holder fixed to wall all as specified and directed

Supply and fix in repair CP soap dish including sponge on bowl fixed to wall with suitable rawl plug all as specified and directed

S&F PVC Connections 15mm size with PTMT nuts of length 450mm

S&F 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or brass ferrule complete and fixed.

S&F 15mm Stop valves, fency type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed

S&F 15mm bore fancy type pillar taps cast copper alloy with capsta heads, chromium plated screwed down high pressure, with or without lettered "Hot or Cold" with long screwed for iron pipe complete and fixed.

S&F 25mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

M&L Hardcore of guage exc. 63mm but not exceeding 100mm, deposited, with broken stone or boulders, spread and levelled in layers n.exc. 15cm thick, watered and rolled / rammed to a true surface.

M&L for PCC 1:3:6 type C2 75mm thick using 40mm graded stone aggregate as in plinth protection.

S&F Towel rail 450mm long PTMT fixed with and including cromium plated and wooden plastic clits complete

S & F lagging to GI pipes 25mm internal dia exposed steel tubing all around (incl provision of lagging on pipe fitting i.e unions,elbows, nipples, tees, etc with 40mm thick bonded mineral wool performed 'SNAPON' pipesections of density 144Kg/cum conforming to IS- 9842 with chicken mesh wire netting 25 gauge, 20mm mesh with 0.01mm aluminium foil complete all as specified.

S & F Rotational moulded polyethylene water storage tanks ,500 Liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paints.

M&L for preparation and painting of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F viterous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floor 110mm bore

PVC bend any radiius size 110mm bore with access door

PVC bend any radiius size 75mm bore with access door

M&L PVC(SWR)I floor trap plain with gratings including jointing to waste pipes wiith solvent cement size 75mm bore.

Removing of hard soil excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point and complete.

Returning, filling in, incl spreading, leveling watering and well ramming in layers not exc 25 cm thick above or below ground level complete all as specified and as directed

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chemfered on edges.

S&F glazed and skelton window/ ventilators 30mm thick (2nd class hardwood) open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; size of members of shutters style and rails to be provided 60-80mm wide complete as specified and directed.

S&F 16mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc.

S&F 20mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc.

S&F Vitreous China bowl urinal flat back size of 465x355x265mm white minimum, with greating and uniun for dischsrge pipe (excluding flushing sisturen, flush pipe and west pipe)

Constr of soakage well (2.40 mtr dia x 3.00 mtr deep) incl excavation in hard/dense siol, PCC 1:3:6 type C2,(using 40mm graded crushed stone aggregate) in foundation, honeycombed and solid stone work in cement mortar 1:4, RCC cover slab, filling all as specified.

Plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore SGSW pipes complete

M & L for SGSW drain pipes 150mm dia grade 'A' laid in trenches and jointed in cement including testing etc all as specified and directed.

M&L providing precast cement concrete type C1 1:3:6 (20 mm graded aggregate) in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces.

M&L for TMT bars mild steel bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or sec

M&L for cement concrete type C2 1:3:6 (40mm graded aggregate) in surface channel and drains.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinths course, string course, lacing course, parapets and railing upto 60cm in height, copings, kneeler, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

S & F butt hinges 75mm, medium weight, cold rolled mild steel and fixed.

S & F vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with flat bottom and connection to drain or out going pipe and flushing pipe.

M&L for Pre-cast cement concrete block masonary with solid building blocks or slabs 10cm thick type C1 1:3:6 using 20mm graded agg and setting in cement mortar complete in CM 1:6.

M&L for cement concrete 1:4:8 type D2 using 40mm graded agg 75mm thick as in sub base flooring.

M&L for 25mm thick Cement Concrete 1:2:4 type B1, (20 mm graded aggregate) as in flooring

S&F 75mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F 15mm stop valve of PTMT any colour high pressure screwed for PP-R pipes.

S&F 25mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc.

S&F 25mm PP-R gate valves of any colour high pressure screwed and fixed to PP-R pipes.

M&L for rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 for rough finishing surfaces to receive tiles without using extra cement.

M&L for rendering 15mm thick in two layers 5mm thick in cement mortar 1:4 over 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth without using extra cement Incl two coats of cement base paint over a coat of white wash.

M&L Point wiring with 1.5sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts cable and including PVC casing and caping suitable size (as per conductor run) with all fittings and accessories and including PVC insulated, un sheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core green colour) cable as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated sheet (Make Hylum) for one light point /fan point / bell point etc controlled by one, one way switch. Complete all as specified and directed by Engineer-in-Charge.

Description all as per serial item no 74 above but for one 3 pin socket out let 5 Amps on same board

S&F switch piano flush type single pole one way 5 Amps complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination 5 pin, 5 Amps 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engineer-in-Chage.

S&F ceiling rose surface bakelite 65x50mm two to three therminal conforming to ISI. Complete all as specified ans as directed by Engineer-in-Charge.

S & F surface and wall mounted LED batten lumiline with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed by Engr-in-Charge. Make: Havells cat part No LUMILINEBS20WLED865SPCWH or its equivalent in philips, bajaj, syska, surya

S&F sheet metal enclosures Factory made double door for distribution board (when MCSs are to be used) single pole and neutral 240 volts 4 ways with 200 Amps rated busbar conforming to ISI. Complete all as specified and directed by Engineer-in-Charge.

M&L 6 to 40 Amps MCB SP ( ISI Marked) 50 C/S 10 KA 'C' sereis complete all as specified.

S&F lamp holder PVC,Poly carbonate type withback plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge.

S&F MCB 40 Amp SPN 50 C/S 10 KA 'C' sereis complete all as specified all as directed

MS SHOWKAT ALIJOO

M/S MA CONSTRUCTION Co

BETONG BUILDERS