GE(U)/CHM-53/2021-22 RENEWAL AND REPLACEMENT OF WATER SUPPLY ASSETS SUCH AS PUMPS REWINDING OF MOTORS CONTROLS PANELS CAPACITOR BANK IN THE MAIN PUMP HOUSE AND MANSA DEVI PUMP HOUSE UNDER AGE EM-II OF CHANDIMANDIR

Amount

Taking down carefully centrifugal pump set 200/215 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after). Make of Pumps: Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS) suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers complete all as specified and directed.

Supply only water seal suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only motor pump tyre coupling of suitable size, pin and bush type complete with bush nut, bolts etc suitable for 200 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: B-FLEX RB Lovejoy or equivalent.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF

Taking down carefully centrifugal pump set 100 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:-Supply of spare parts shall be measured and paid for separately under respective items here-in-after .

Supply only pump shaft sleeve made of gun metal suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush/latern ring suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 100 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Lovejoy/ Unimac

Supply only bronze impeller suitable for 100 HP pump all as per manufacturer's design as per staging and eye of the impeller complete all as per specified and directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF

Taking down carefully centrifugal pump set 50 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:- Supply of spare parts shall be measured and paid for separately under respective items here-in-after .

Supply only pump shaft sleeve made of gun metal suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed. MAKE: NBC/ TATA/ SKF NOTE: All the items/parts mentioned srl 3.01 to 3.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 3

Taking down carefully centrifugal pump set 30 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF

Taking down carefully centrifugal pump set 20 to 25 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed. MAKE: NBC/ TATA/ SKF

Taking down carefully centrifugal pump set 10 to 15 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed. MAKE: NBC/ TATA/ SKF

Dismantling and taking up submersible motor pumpset 15 HP, 3 phase with connected pipes of size 80/100 mm from the tube well after dis-connecting the electric connections, shifting the same to the workshop for repair involving replacement of wornout parts, bringing back to the site after repair and lowering the motor pump set including replacement of rubber washers, nuts, bolts, washers and re-fixing electrical connections as required at site (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) and testing on load, complete all as specified and as directed. MAKE : Kirloskar, CG or any make as per site.

Supply only SS impeller suitable for 15 HP submersible pump set seven stage as per manufacturer's design complete all as specified and as directed.

Supply only shaft sleeve suitable for 15 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Supply only neck ring suitable for 15 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing required as per site condition complete all as specified and as directed.

NOTE: All the items/parts mentioned Srl 1 to 7 here-in-above shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item Nos. 01 to 07 .

Opening of submersible motor capacity 15 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding of the same with PVC insulated copper cable of appropriate size matching with manufactures design, including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed. Note: All the items/parts mentioned against item 10.01 to 10.05 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against item 10. Cost of fixing of item 10.01 to 10.04 shall deemed to be included in the unit rate of item 10 here-in before.

Servicing of hand operated crane of capacity upto 5 tonne including cleaning with wire brush, greasing of hoist, painting with approved color, replacement of hook, cleaning and greasing of rail slots, replacement of bridge drive and idler wheels, repair of pulley chain, painting of all iron parts with approved color, complete including load testing all as specified and directed

Taking down defective electric motor, squirrel cage type of any make, from base plate after unscrewing nuts, bolts of foundation/ coupling, 3 phase, 415/440 volts, 50 Hz, AC of capacity 215/200 HP shifting the same to workshop, strip opening after un-screwing nuts, bolts/ screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enameled copper winding wire of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, leathered paper, PVC insulated copper conductor wire connection leads of appropriate size with sleeves of suitable size upto terminal connection box, varnishing, drying up, re-assembling, refxing and re-installation at site complete and testing on load complete all as specified and as directed by Engineer-in-Charge. Note: (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall deemed to inculde the same. (ii) Repair shall be done from any workshop within a radius of 20 Km from GE (U) Chandimandir. (iv) After assembling, rewinded motor shall be checked for no load current and full load current. Make : Kirloskar, CG or any make as per site.

All as per the description of serial item No 10 here-in-above but 100 HP motor .

All as per the description of serial item No 10 here-in-above but 50 HP motor

All as per the description of serial item No 10 here-in-above but 30 HP motor

All as per the description of serial item No 10 here-in-above but 20 to 25 HP motor

All as per the description of serial item No 10 here-in-above but 10 to 15 HP motor.

All as per the description of serial item No 10 here-in-above but 7.5 HP motor

All as per the description of serial item No 10 here-in-above but 5 HP motor.

Supply and fixing in repair ball bearing DE/NDE suitable for AC electric motor, 3 phase, 415/440 volts of rating 200/215HP capacity complete all as specified and as directed. MAKE : SKF/TATA/NBC.

All as per the description of serial item No 18 here-in-above but of rating 100 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 50 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 30 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 25 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 20 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 15 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 10 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 7.5 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 5 HP motor.

Taking out open well type 7.5 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

Taking out open well type 2 to 3 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

Material and labour for Strip opening of open well type submersible motor of capacity 2 to 3 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Taking out open well type 0.5 to 1 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

Material and labour for Strip opening of open well type submersible motor of capacity 0.5 to 1 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Supply and fixing, in replacement, multi stranded, 4 Sqmm, 3 core, PVC insulated and sheathed flat cables, 1100 volts, with copper conductor, ISI marked, IS- 694 complete all as specified and as directed. Make: BCH/ Finolex/ Havells/ Plaza

All as per the description of serial item No 33 here-in-above but of size 6 Sqmm, 3 core

Supply and fixing, in replacement, multi stranded, 10 Sqmm, 3 core, PVC insulated and sheathed, unarmored copper conductor cables, 1100 volts, with copper conductor, ISI marked, IS- 1554/IS-694 complete all as specified and as directed. Make: BCH/ Finolex/ Havells/ Plaza

All as per the description of serial item No 35 here-in-above but of size 16 Sqmm, 3 core

All as per the description of serial item No 35 here-in-above but of size 25 Sqmm, 3 core

All as per the description of serial item No 35 here-in-above but of size 35 Sqmm, 3 core

All as per the description of serial item No 35 here-in-above but of size 50 Sqmm, 3 core

All as per the description of serial item No 35 here-in-above but of size 95 Sqmm, 3 core

Supply & fixing, in replacement motor pump set 'L' type spider coupling set, size L-150 complete made out of cast iron including drilling holes and suitable size of nuts & bolts complete all as specified and directed. Make: Flex-C/Lovejoy/HIC/Fenner

All as per the description of serial item No 41 here-in-above but of size L-190

All as per the description of serial item No 41 here-in-above but of size L-225

All as per the description of serial item No 41 here-in-above but of size L-276

All as per the description of serial item No 41 here-in-above but of size L-295

Taking down carefully existing motor and pump set of capacity 10 to 20 HP from MS common base frame for replacement of deteriorated base frame and repair of PCC foundation including re-mounting of motor pump set to match with alignment of existing pipe line complete all as specified and directed by Engineer-in-Charge. Note : PCC foundation & MS common base frame shall be measured & paid seperately under respective item of BOQ.

All as per the description of serial item No 46 here-in-above but for motor pumps of capacity 30 HP

All as per the description of serial item No 46 here-in-above but for motor pumps of capacity 50 to 75 HP

All as per the description of serial item No 46 here-in-above but for motor pumps of capacity 100 to 120 HP

Demolition and removing from site old PCC and M & L for Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (mass concrete) for pump set bed including necessary form work complete all as specified and directed.

Supply and fixing, in replacement, rolled mild steel channel, angle or tee sections, fixed independently, without connection plate, etc Fe-290 (Gde E-165) including nuts, bolts and washers for base frame of motor pump set, drilling of holes of suitable size for bolts & painting with 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

Earthing complete with galvanized steel plate electrode 60cmx60cmx6mm surrounded by charcoal & salt buried directly in a pit of depth not less than 2.25m below ground level with top edge of the earth plate at a depth of not less than 1.50m below ground level, connected to and including GI strip 25mmx4mm upto 7.5m length by means of bolts, nuts, check nuts & washers of galvanized iron, earth strip protected by galvanized steel pipe 40 mm bore (light grade) & connected to main control board including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore GI pipe (medium grade) for watering, funnel, wiremesh, PCC chamber in cement concrete (1:3:6) type C-1, 40mm thick RCC(1:2:4) type B-1 cover & frame etc) complete all as indicated in electric plate No 3 of SSR 2009 Part I including testing complete all as specified and as directed. NOTE : (i) Earthing result/data sheet will be prepared by the Contractor and submitted to Engineer-in-Charge. Earth resistance shall be to the entire satisfaction of Engineer-in-Charge and contractor will make all arrangements & provisions to get the desired reduction of resistance by artificial treatment/replacement of soil etc at no extra cost to department. (ii) GI protection pipe for earth lead shall be measured & paid for separately .

Supply and fixing in replacement aluminium strip as in earth connection of plants /assets of size 25 mm x 4 mm complete all as specified and directed.

Supply and fixing in replacement GI strip as in earth connection of plants /assets of size 32 mm x 6 mm complete all as specified and directed.

Supply & fixing, in replacement, direct online starter suitable for 5 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Supply & fixing, in replacement, direct online starter suitable for 7.5 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Supply & fix in repair direct online starter suitable for 10 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Lath work for making of threads on a cylindrical (internal / external) surface and turning of conical surfaces or tapers and making of any tools as directed by engr-in- charge.

Material and labour motor capacitor of capacity 20 micro farad.

Material and labour motor capacitor of capacity 25 micro farad.

Material and labour motor capacitor of capacity 36 micro farad.

Material and labour motor capacitor of capacity 45 micro farad.

Electrical insulating mat as per IS 15652:2006, with anti skid design, 1.1 KV grade, 3mm thick, 1 mtr wide, type-C, complete all as specified and as directed.

Supply and fixing glow signage boards with base frame made from angle iron and backside from ACP sheet 3mm thick with IP 68 protection LED module, good quality virgin monomer Acrylic sheet, 3 inch rising moulding of acrylic letter with 5mm sun board channel, including complete wiring and SMPS power supply with IP 68 protection, Each letter will be made with computer offset for having same letter style and type as approved by Engineer-in-Charge, complete all as specified and directed.

Supply and fixing, in replacement, light waterproof IP-68 ,RGB colour, Stainless Steel body, 10 W including fitting complete all as specified and as directed.

Supply and fixing, in replacement, light waterproof IP-68 , RGB colour ,Aluminium body 10 W including fitting complete all as specified and as directed.

Supply and fixing, in replacement, Fountain Jet nozzle suitable for 25 mm dia pipe complete all as specified and directed.

Supply and fixing of copper thimble for 10 to 35 Sqmm cable

Supply and fixing of copper thimble for 50 to 95 Sqmm cable

Welding work any type Gas welding/ electric welding for any tpye of Job completed.

Shifting of existing panel board with in 10 Km distance including loading unloading, demolation of existing foundation and make good complete all as specified and as directed.

Material and labour, in replacement, Pop Up Sprinklers inreplacement 50 mm dia working pressure 1 to 3 bar complete.

Material and labour, in replacement, Rain Bird Swing Joint in replacement 50mm operating pressure 80 PSI complete.

Material and labour, in replacement, Air release Valve in replacement 50 mm dia complete.

Material and labour, Solveent cement 500 ml complete all as specified.

Material and labour, in replacement, Online water filter as per sample

Material and labour, in replacement, pressure gauge as per sample

Material and labour, in replacement, PVC Branch pipe 15 mm dia flexible

Material and labour, in replacement, stainless steel with brass connector round dia of pipe 54 mm dia and 15 mm threads fountain weilded in per meter for fixing of nozzle including weilding work for any connecting work requirement complete all as specified and directed.

Supply and fixing, in replacement, of brass nozzle adjustable type of 15 mm dia, interior thread complete all as directed.

Supply and fixing, in replacement, suction stainer of size 80 mm bore

Supply and fixing, in replacement, suction stainer of size 100 mm bore

Supply and fixing, in repair Ladder type Cable Trays incl all fittings are fabricated out of Steel Sheets conforming to IS: 1079, 1973 & IS: 513, 1994 with a thickness of 3 mm Side channel height 125 to 150 mm, width 300mm, Runner size 35mm and length of tray 2.5 mtr to 3 mtr Each . Steel Sheets are procured from reputed suppliers like TATA Steel, SAIL & ESSAR Steel etc.

Dismantling and taking down existing unserviceable soft starter from motor starter panels and supply and fixing soft starter 3 phase, 50 Hz, 415 V, Icl current rating 480A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 165 kW motor, complete all as specified and directed. Make: Schneider Electric Cat Part No: ATS22C48Q or equivalent in ABB/Siemens

Dismantling and taking down existing unserviceable soft starter from motor starter panels and supply and fixing soft starter 3 phase, 50 Hz, 415 V, Icl current rating 110 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 55 kW motor, complete all as specified and directed. Make: Schneider Electric Cat Part No: ATS22C11Q or equivalent in ABB/Siemens

Dismantling and taking down existing unserviceable soft starter from motor starter panels and supply and fixing soft starter 3 phase, 50 Hz, 415 V, Icl current rating 170 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 90 kW motor, complete all as specified and directed. Make: Schneider Electric Cat Part No: ATS22C17Q or equivalent in ABB/Siemens

Dismantling and taking down existing unserviceable soft starter from motor starter panels and supply and fixing soft starter 3 phase, 50 Hz, 415 V, Icl current rating 140 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 75 kW motor, complete all as specified and directed. Make: Schneider Electric Cat Part No: ATS22C14Q or equivalent in ABB/Siemens

Disconnecting from site full vacuum chlorinator plant Model: TJ-C2212 Make: Toshcon Jesco India and repairing, servicing and calibration from the OEM and reinstallation & testing at site complete all as specified and directed. Note : (a) Servicing & calibration shall be done from the original manufacturer and necessary test certificate shall also be produced after repairs. (b) Spare parts shall be measured & paid separately as supply only under relevant items here-in-after.

Supply only vacuum Regulator with measuring glass (without inlet valve) contains O-ring dia 9x2.2mm, dia 14 x 1.78mm, dia 10 x 2mm, dia 7.65 x 1.78mm, dia 40.85 x 5.34mm & dia 14 x 4 mm, Screw M5 x 40mm, M5 x 16 mm, Snap ring & Ring diaphragm. Part No:35040 suitable for chlorinator complete all as specified and directed.

Supply only Inlet valve contains Gasket, Filter dia 20 mm, Ball, valve seat, O-ring Dia 19x2.5 mm & dia 21x 3.5 mm, Screw M5x 16 mm & M5X30 mm, O-ring. Part No.35037 suitable for chlorinator complete all as specified and directed.

Supply only Non Return Valve (with back pressure regulator) Contains Annular diaphragm, Flat Diaphragm & O-ring. Part : 33392 suitable for chlorinator complete all as specified and directed

Supply only O-ring set for Measuring Glass. Part No: 29717 suitable for ichlorinator complete all as specified and directed

Supply only ejector valve of appropriate size suitable for creating vaccumm for complete safe delivery of gas from chlorinator complete all as specified and directed.

Disconnecting electric connection of VT pump set and removing the nut and bolts and keeping aside , removing the VT pump set by using chain pulley block wire rope, pipe holding flat iron clamps etc.

Disengaging/Dismantling of discharge head by the help of special tool, removing of solenoids valve, and complete system, removing of the column pipe, line shafts, rotor and pump set by the help of chain pulley block wire rope, pipe holding flat iron clamps. Taking out damaged shaft from the column pipe including transportation of oil tubes for removing of damage bush and other parts to wksp.

SS shaft of existing size 40mm, 5 fit long including threading, grinding and cutting, complete all as specified and as directed.

Opening of VT pump set, cutting, taking out existing winding, cleaning etc carefully and rewind with super enameled insulated copper wire with existing gauge & size and turns of coils including, heating, providing mica sheet & Ball bearing-6321 SKF etc complete all as specified and as directed.

Replacement of gun metal bush, of shaft & repair of Rotor

Refixing the pump set with electric motor, tighten with nut & bolts, electrically connection of motor and motor starter after checking of phase sequence etc.

Supply and fixing, in repair heavy duty Exhastfan Item code-415007CRO, HSN No-84145190,Sweep-450mm,phase-Single,RPM-1400,Sweep in Inch-18.

Supply only HRC fuse 100 Amp for Soft Starter

Supply only HRC fuse 160 Amp for Soft Starter

Supply only HRC fuse 250 Amp for Soft Starter

Supply only glass type fuse 5 Amp, 125V for Soft Starter

Supply, installation, testing and commissioning of indoor type floor mounting size as per manufacturer's design Polycarbonate CPRI approved OEM made Motor Starter Panel suitable for , shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel should be anti-acid & anti corrosive. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of board/panel shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE OF DEGREE OF INGRESS PROTECTION IP65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane. The manufacturer of board/panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1.

The CPRI report shall have mention of following tests performed and passed out satisfactorily: Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits. The board manufacturer must submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable. Guarantee and warrantee certificates will be accepted only from original manufacturer. The panel should passed glow wire test 960oC in accordance with 60695-2-11 flame retardant and self-extinguishing with MC 75 for base frame & angle iron 50 x 50 x 6 mm size legs , 04 nos legs 600 mm long, PCC 1:2:4 type B-1 for grouting of base,suitable for 3 phase 415 volts 50 Hz 4 wire AC supply complete all as directed with and incl the following:- (A) : (i) MCB 3 pole, 415 Volts, rating 32 Amps, 10 KA - 04 No. (ii) Line contactor, AC 3 duty, 415 Volts, 50 Hz,150 Amps-01 No. (iii) Soft starter 3 phase, 50 Hz, 415 V, Icl current rating 110 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 55 kW motor, complete all as specified and directed. Make: Schneider Electric Cat Part No: ATS22C11Q or equivalent in ABB/Siemens.

(iv) Independant Control supply transformer and fast acting semiconductor fuse of suitable rating for soft starter protection -01 set (v) Resin cast CT 300/5A cast resin base – 01 set of 03. (vi) Push button ON/OFF, AC 415 Volts 50 Hz - 02 Nos. (vii) LED indication lamp AC, 415 Volts , 50Hz for RYB, ON/OFF, trip - 06 Nos. (viii) Emergency push button OFF - 01 No. (ix) Terminal block suitable for 300A rating with brass contacts for INPUT/OUTPUT termination with 9 ways. (x) 3 Phase 4 wire copper bus bars of suitable length & section not less than 40 x 10mm covered with coloured heat shrinkable anti track insulation tape of make Denson/ M-seal or equivalent of finished thickness not more than 1mm and fixed on epoxy base post insulator of both dia and height not less than 40mm- 01 set. (xi) Control wiring of push buttons, indicators/ protection circuits contactors, soft starter with 1.5 Sqmm multi strand copper cable, lugs and ferrules- 01 Job as per circuit design complete all as specified and directed. (B)-:(i) MCCB 3 pole, 100 Amps, 415 volts, 50 Hz, Icu- 25 kA, adjustable thermal & fixed magnetic release type - 01 No.

Taking down old unserviceable MCCB any size/capacity up to 400 amps complete all as specified and directed at site by Engr-in-charge.

Supply and fixing, MCCB four pole 400 amps 415 volt, 50 Hz breaking capacity not less than 36 KA with thermal magnetic release, adjustable thermal and adjustable magnetic setting with spreader links Ics=100 % of Icu complete all specified and directed by Engr-in-Charge. Make : L&T

Supply and fixing, MCCB four pole 320 amps 415 volts, 50 Hz breaking capacity not less than 36 KA with thermal magnetic release, adjustable thermal and adjustable magnetic setting with spreader links Ics=100 % of Icu complete all specified and directed by Engr-in-Charge. Make : L&T

Supply and fixing, MCCB four pole 250 amps 415 volts, 50 Hz breaking capacity not less than 36 KA with thermal magnetic release, adjustable thermal and adjustable magnetic setting with spreader links Ics=100 % of Icu complete all specified and directed by Engr-in-Charge. Make : L&T

Supply and fixing, MCCB four pole 200 amps 415 volts , 50 Hz breaking capacity not less than 25 KA with thermal magnetic release, adjustable thermal and adjustable magnetic setting with spreader links Ics=100 % of Icu complete all specified and directed by Engr-in-Charge. Make : L&T

Supply and fixing, MCCB four pole 160 amps 415 volts, 50 Hz breaking capacity not less than 25 KA with thermal magnetic release, adjustable thermal and adjustable magnetic setting with spreader links Ics=100 % of Icu complete all specified and directed by Engr-in-Charge. Make : L&T

Supply and fixing MCCB four pole 125 amps 415 volts, 50 Hz breaking capacity not less than 25 KA with thermal magnetic release, adjustable thermal and adjustable magnetic setting with spreader links Ics=100 % of Icu complete all specified and directed by Engr-in-Charge. Make : L&T

Supply and fixing MCCB four pole 100 amps 415 volts, 50 Hz breaking capacity not less than 25 KA with thermal magnetic release, adjustable thermal and adjustable magnetic setting with spreader links Ics=100 % of Icu complete all specified and directed by Engr-in-Charge. Make : L&T

Supply and fixing, in replacement, indicator lamp, LED type of colour red/ green complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement, phase indicator lamp, LED type of colour red, bule and yellow (Set of three) complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement, indicator lamp, LED type of colour red/ green complete all as specified and directed by Engr-in-Charge.

Taking out/ down existing heavy duty capacitors cylindrical series of any size and capacity complete all as specified and directed by Engr-in-Charge.

Supply and fixing heavy duty capacitors cylindrical series 5 kVAr rating, 440 volt complete all as specified and directed by Engr-in-Charge. Make : L&T or equivalent as approved.

Supply and fixing heavy duty capacitors cylindrical series10 kVAr rating, 440 volt complete all as specified and directed by Engr-in-Charge. Make : L&T or equivalent as approved.

Supply and fixing heavy duty capacitors cylindrical series 15 kVAr rating, 440 volt complete all as specified and directed by Engr-in-Charge. Make : L&T or equivalent as approved.

Supply and fixing heavy duty capacitors cylindrical series 20 kVAr rating, 440 volt complete all as specified and directed by Engr-in-Charge. Make : L&T or equivalent as approved.

Supply and fixing heavy duty capacitors cylindrical series 25 kVAr rating, 440 volt complete all as specified and directed by Engr-in-Charge. Make : L&T or equivalent as approved.

Supply and fixing, in replacement, change over switch ON LOAD type, 415 volt, 50 Hz, AC 4 pole in sheet steel enclosures, capacity 400 Amps rated current manually operated confirming to IS : 13947 or lates edition with hight thermal and dynamic strength to with stand short circuit current level of 80 KA rms complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing LT under ground cable XLPE insulated and armoured and PVC sheathed 1100 volts grade, heavy duty with multistranded aluminum conductor of size 70 sqmm 3.5 core laid in trenches/ducts/ along poles/through pipe under road etc with new aluminum lugs complete all as specified and directed.

All as per item No131 above but of size 95 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as per item No131 above but of size 120 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as per item No 131 above but of size 185 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as per item No 131 above but of size 240 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as per item No 131 above but of size 300 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as per item No 131 above but of size 400 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

Sabhyata Electrical and Mechanicals

M/S Gupta and Sons

M/s Friends Engineering Works