Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2 L
Closing Date
30 May 2026, 11:00 pmClosed
Minor Irrigation Department
NAGANAGOUDA Y BHAVI
Construction of Anicut across Nala near Tajsultanpur Village in Kalaburagi Taluka & District
MI/2026-27/IW/WORK_INDENT11682
MI/2026-27/IW/WORK_INDENT11682
Open
Irrigation and Other Works
Two Tender Document System(Two Cover)
Minor Irrigation Division Kalaburagi
10 documents required · 10 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed (at least 90% of the contract value), similar nature of work from a single contract such as Construction of Anicut/BCB/Barrage of value not less than Rs. 60.52 Lakhs during the last five years (2021-22 to 2025-26). The value of the completed work shall be given a weight of 10% per year to bring them to the price level of FY 2026-27.The work done certificate should be obtained duly Signed from an Officer not below the rank of Executive Engineer of the concerned division
The intending bidder should have executed a minimum Quantity of the following Items as stated below in any one year in during last five years (2021-22 to 2025-26). The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer 1. Earth work (Excavation and Embankment Quantity): 8787.00 Cum 2. Cement Concrete Quantity: 865.00 Cum 3. Reinforcement Steel: 15.229 Tonne 4. Structural Steel: 0.976 Tonne 5.Pitching/Revetment: 512.00 Sqm
List of Existing Commitments and ongoing works in all departments
Section 3 Qualification Information as per bid document
Liquid assets and /or availability of credit facilities of no less than Rs. 68.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.
Achieved in at least two financial years during last 5 years (i.e., 2021-22 to 2025-26) Minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 242.06 Lakhs should not be less than Two times the Estimated Annual Payments under this contract. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2026-27.
Tenderers who meet the specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5-B), Where A is Maximum value of civil engineering works executed in any one year during the last five years i.e.2021-22 to 2025-26 (updated to 2026-27 price level) taking into account the completed as well as works in progress. N is Number of years (0.5 years) prescribed for completion of the works for which tenders are invited. B is Value, at 2026-27 price level, of existing commitments and ongoing works to be completed during the next 0.5years (06 Calendar months) Note: The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
A copy of valid KPWD Class III and above registration certificate of individual bidder should be uploaded
₹3,030
₹2 L
16 May 2026
16 May 2026
1 Jun 2026
29 May 2026
22 May 2026
Anicut-1
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness in area of light jungle etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off materials with all leads and lift etc. complete and as per the direction of the Engineer-in-charge.
Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials with all leads and lift etc. complete and as per the direction of the Engineer-in-charge.
Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour, tamping, plugging leakage points and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging/ chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations complete etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L-bend for embedding in concrete/ masonry of over flow/ non-over flow blocks and other appurtenant works including cost of all materials, machinery, labour, drilling and cleaning hole, filling hole with thick cement slurry, driving anchor rod and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Supplying, fitting and placing TMT FE 550/ 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/ soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Foundation of Bridges) etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam/ pickups/ irrigation tanks/ waste weir/ sluice, sluice canal and other allied works like abutments/ wing walls/ returns/ cutoff walls works & all necessary works etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing rubble/ boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/ wedging stone chips, finishing, and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners with all accessories for canal escape/ regulator stoplog gate including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint and all other ancillary operations complete as per specifications and approved drawings.
Design, fabrication, supply, erection, testing and commissioning of sliding type interchangeable stoplog gate elements consisting of skin plate, stiffeners, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, guide shoes, rubber seals etc., with all accessories for canal regulator vent including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coats of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings.
Providing casing embankment using semi-pervious/ pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Anicut-2
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness in area of light jungle etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off materials with all leads and lift etc. complete and as per the direction of the Engineer-in-charge.
Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials with all leads and lift etc. complete and as per the direction of the Engineer-in-charge.
Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour, tamping, plugging leakage points and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging/ chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations complete etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L-bend for embedding in concrete/ masonry of over flow/ non-over flow blocks and other appurtenant works including cost of all materials, machinery, labour, drilling and cleaning hole, filling hole with thick cement slurry, driving anchor rod and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Supplying, fitting and placing TMT FE 550/ 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/ soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Foundation of Bridges) etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam/ pickups/ irrigation tanks/ waste weir/ sluice, sluice canal and other allied works like abutments/ wing walls/ returns/ cutoff walls works & all necessary works etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing rubble/ boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/ wedging stone chips, finishing, and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners with all accessories for canal escape/ regulator stoplog gate including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint and all other ancillary operations complete as per specifications and approved drawings.
Design, fabrication, supply, erection, testing and commissioning of sliding type interchangeable stoplog gate elements consisting of skin plate, stiffeners, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, guide shoes, rubber seals etc., with all accessories for canal regulator vent including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coats of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings.
Providing casing embankment using semi-pervious/ pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Total
MILE STONE
Construction of Anicut across Nala near Tajsultanpur Village in Kalaburagi Taluka & District
1st month
Anicut-1
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness in area of light jungle etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off materials with all leads and lift etc. complete and as per the direction of the Engineer-in-charge.
Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials with all leads and lift etc. complete and as per the direction of the Engineer-in-charge.
Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour, tamping, plugging leakage points and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging/ chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations complete etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L-bend for embedding in concrete/ masonry of over flow/ non-over flow blocks and other appurtenant works including cost of all materials, machinery, labour, drilling and cleaning hole, filling hole with thick cement slurry, driving anchor rod and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Supplying, fitting and placing TMT FE 550/ 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/ soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Foundation of Bridges) etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam/ pickups/ irrigation tanks/ waste weir/ sluice, sluice canal and other allied works like abutments/ wing walls/ returns/ cutoff walls works & all necessary works etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing rubble/ boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/ wedging stone chips, finishing, and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners with all accessories for canal escape/ regulator stoplog gate including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint and all other ancillary operations complete as per specifications and approved drawings.
Design, fabrication, supply, erection, testing and commissioning of sliding type interchangeable stoplog gate elements consisting of skin plate, stiffeners, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, guide shoes, rubber seals etc., with all accessories for canal regulator vent including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coats of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings.
Providing casing embankment using semi-pervious/ pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Anicut-2
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness in area of light jungle etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off materials with all leads and lift etc. complete and as per the direction of the Engineer-in-charge.
Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials with all leads and lift etc. complete and as per the direction of the Engineer-in-charge.
Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour, tamping, plugging leakage points and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging/ chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations complete etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L-bend for embedding in concrete/ masonry of over flow/ non-over flow blocks and other appurtenant works including cost of all materials, machinery, labour, drilling and cleaning hole, filling hole with thick cement slurry, driving anchor rod and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Supplying, fitting and placing TMT FE 550/ 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/ soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Foundation of Bridges) etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam/ pickups/ irrigation tanks/ waste weir/ sluice, sluice canal and other allied works like abutments/ wing walls/ returns/ cutoff walls works & all necessary works etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing rubble/ boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/ wedging stone chips, finishing, and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners with all accessories for canal escape/ regulator stoplog gate including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint and all other ancillary operations complete as per specifications and approved drawings.
Design, fabrication, supply, erection, testing and commissioning of sliding type interchangeable stoplog gate elements consisting of skin plate, stiffeners, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, guide shoes, rubber seals etc., with all accessories for canal regulator vent including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coats of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings.
Providing casing embankment using semi-pervious/ pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Total
The liquidated damages
For Milestone 1:
For Milestone 2:
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
detailed_specification.doc
Others - specifications • 0.78 MB
ANICUT SITE-1.PDF
Others - DRAWINGS • 3.44 MB
Bid_Document_TAJ - Copy.doc
Tender Document • 20.70 MB
ANICUT SITE 2.PDF
Others - DRAWINGS • 6.99 MB
TAJ MILESTONE.xlsx
Others - MILESTONE • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .