Wall Panelling work in Badminton Court at Raj Bhawan, Jaip

Amount

Providing and Fixing Armstrong Channeled Wood Works perforated panels of width 192 mm, thickness of 15 mm length 2400mm of as required by the Architect/Engineer-in-charge, made of Moisture Resistant fibre board with minimum 595 Kg/M3 density substrate with a laminate facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a "Helmholtz" fluted perforation of 3mm width and 21 mm of visible panel each, The edges of the panels shall be Tongue-and-grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical flecce having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided byu Armstrong Installation: The Installation work includes fiing of Aluminium extruded channels of section 20x15mm as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-incentre. Screw the aluminium extruded keel for channelled works provided by Armstrong over the lowest and second at an on-centre distance of 600mm. Placing the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips wooden moulding of matching colour. Installation to be carried out by Armstrong trained installation them & installation should be carried out as per Armstrong recommended procedure and pattern decided by Engineer-in-charge.and approved by the architech/Engineer-in-charge.

Rashmi Enterprises

Rashmi Enterprises