SPECIAL REPAIR OF ROOF TREATMENT TO BLDG NO P 01 ACADEMIC BLOCK AT RMS DHOLPUR

Amount

M&L for the surfaces prepration which are to receive the coating or treatment must be free from oil, laitance, grease, wax, dirt or any other form of foreign material adhering on it before the waterproofing job started. Dust free the surface, including removing of existing treatment/ old felt/ loose plaster/ concrete etc. and repair with polymer mortar by adding bonding agent (SBR). Repairing of slab, parapet wall junction, cracks and other large blowholes by open in "V" shapes & filling by polymer mortar or putty followed by fiber mesh tape with SBR in conjunction with cement complete all as specified. Make : M/s Sika India Pvt Ltd/Fosroc/Pidilite Dr Fixit or equivalent approved make.

M&L for applying 3 coats of one component polyurethane based liquid applied membrane with improved water ponding resistance, excellent UV resistance, good crack bridging capacity Elongation at break ~300 % (Free film, 14days, +30 °C) (ASTM D412) Tensile adhesion strength ≥ 1.5 N/mm2 (ASTM D4541)Tear strength ~20 N/mm (Free film, 14 days, +30 °C) (ASTM D624) Solar Reflectance Index 106 (ASTM E1980-19) Water resistance No blisters or peeling when subjected on top of concrete.Firstly Priming Coat consumption @ .3 kg/Sqm with polyurethane based water proofing liquid should be appllied in diluted with 10 % water as primer , after the Priming coat is completly dry becomes slightly darker then apply 2nd coat (Base Coat consumption @ 1kg/Sqm) with undiluted polyurethane based water proofing liquid in criss -cross direction with roller. Spread glass fibre mesh reinforcement of 1mm thickness with overlap of 50mm in both direction when the surface is still tacky . After the drying of 2nd coat completly apply the 3rd coat(Top Coat consumption @ 1kg/Sqm) with undiluted polyurethane based water proofing liquid in a direction parpendicular to previous coat.The min. thickness of dry film of complete application should not be less than the as recommended by mfgThe overall dry thickness should not be in any case less than 1.5mm complete all as specified. Product Make : Primer: Sikalastic 590 IN/ Nitoproof 600 PF system/Dr. Fixit; Base Coat,Top Coat & Seal Coat :Sikalastic 590 IN/Fosroc Nitoproof 600 PF system /Dr Fixit; Glass Fibre Reinforcement : Sika Fabric 50/Fosroc/Dr. Fixit or equivalent approved make.

S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified.

Roughning surfaces of old concrete floor by picking , sweeping , clean and washing down with water to remove dust etc complete all as specified.

M&L Non skid coloured ceramic tiles area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm (600x600) 7 to 8 mm thick joint less in floor/skirting set in neat cement slurry and pointed with coloured/white cement to match the surface complete all as specified.

M&L Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified.

Dismantling Wall Panelling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets/plywood, any thickness, including cover fillets complete all as specified.

M&L providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions incl fixing with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified.

S&F in repair for decorative laminate PVC wall panelling with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement/ approves adhesive complete all as specified as manufacturer's Instructions.

Demolitiion of brick work/stone boulder masonary, built in cement mortar or cement lime mortar including all quions arches,pillars etc but excluding ashlar facings,dressed stone work and precast concrete but exceeding ashlar facingdressed stone work and precast concrete articles complete all as specified.

M&L for walling of random rubble, uncoursed well bonded bedded, and solidily hearted, built in cement mortar 1:6 complete all as specified.

M&L for walling of random rubble, uncoursed well bonded bedded, and solidily hearted, built in cement mortar 1:6.but except stone complete all as specified.

Extra over stone walling for hammer dressing to face stones and dressing,of face beds and joints, as specified, of random rubble walling uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface n. exc. 40 mm, on lime or sand stones complete all as specified.

Raking out joint of pointing to random rubble or polygonal rubble, un-coursed or brought up to courses built in cement mortar complete all as specified.

M&L for Flush pointing to Random rubble masonry, uncoursed or brought up to courses in cement mortar 1:4 complete all as specified.

M&L for plain cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in lintels upto 1.5 m clear sp and other similar bands, plinth courses, string courses,parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, water troughs and the like including weathering, slightly rounded or chamfered anglesand throating complete all as specified.

Taking down cement plaster of any description including racking out joints, hacking for kay scrubing down with water etc complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work or on one side of lathing , finished even and smooth without using extra cement complete all as specified.

M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work,complete all as specified.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over external surfaces complete all as specified.

M&L for 1.5 mm thick (in two coats) wall care Putty on Wall Surface including sand paper gentle rubbing to obtain smooth surfaces & Mixing is done by using mechanical stirrer including all necessary arrangement for execution of work complete all as specified.

M&L applying Two coats of Plastic emulsion paint on brick, stone, concrete or plastered surface including and over a coat of primer complete all as specified.

M&L Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Ceiling Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work,complete all as specified.

M&L for applying Two coats of Plastic emulsion paint on Ceiling surfaces of any description over 10cm girth or width, not otherwise described over and including primer complete all as specified.

M&L for preparation of old ceiling surfaces of any description over 10 cm girth or width, not otherwise described and applying Two coats of Synthetic enamel paint on stone, concrete,or plastered ceiling surfaces complete all as specified.

M&L for preparation of old surfaces of any description over 10 cm girth or width, not otherwise described and applying Two coats of Synthetic enamel paint on brick, stone, concrete,or plastered surface of wall complete all as specified.

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

M&L for one coat of French polishing on old wood or wood based surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works complete all as specified.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

Taking down shutter of any description area exc 1 sqm and n. exe 2 sqm and removing from the site complete all as specified.

Taking down door/window shutters easing & adjusting, refixing in same opening of any description not exc. 1 sqm each complete all as specified.

S&F 2nd class hardwood 35 mm thk Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S & F Mild steel pressed handles oval type size 150 mm , stove enamelled black of complete all as specified.

S & F 200 mm long mild steel tower bolts, stove enamelled black, with bright bolt complete all as specified.

S & F mild steel sliding door bolt 300mm long, plate type stove enamelled black, with bright bolt not less than 12 mm dia with and including a min of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Dismantling wrought iron or Mild steel work of any description not otherwise provided for complete all as specified.

Supply and fixing mild steel rolled sections such as angles etc. As in main and cross beam, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding dorrs, fixed with angle cleats or other connected plates confirming to grad Fe 290 (Gde E-165) complete all as specified.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding,with and including either hooks,and hinges or steel hanging,door fittings (exclusive of steel sheeting or other covering,running rails and guides) and,hanging; also fastening and,fixing complete all as specified.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings etc complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, molding / folding in circular / semicircular of any position and height fixed with self tapping screws complete all as specified.

Dismantling of expanded metal any thickness or mesh fixed with steel , wood fillets if any complete all as specified.

S&F welded steel wire fabrics n exc 4Kg fitted to steel members complete all as specified.

M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron complete all as specified.

M&L for providing ready to use UV resistant transparent liquid membrane system Apcobuild Terracoat for tiling/china chips/mosaic or textured roofs or exposed surface. The system shall applying in 3 coats by roller/brush @500grm/sqm). Allow the first coat to dry, then proceed with application of second coat and same for third final layer. The system should not apply on wet surface. Flood test: After cured for a least 72hours, flood a minimum 50mm water for 24 hours by plugged the drains complete all as specified. Make: Equivalent of Fosroc/Chemsol/Bostik/Choksey etc M/s Apcotex/ Fosroc/Chemsol/Bostik/Choksey etc

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etccomplete all as specified.

M&L point wiring concealed type complete including cutting chases for conduit pipes on stone masonry wall with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in pvc conduit pipes with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed inside the wall/ceiling by means of PVC conduit pipes and suitable accessories including suitable size of PVC boards / sunken box with modular boards and cover plate,base plate for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete rate including cutting chases and finishing the wall after concealing the pipe with suitable plastering/putty/distembering etc matching to existing complete all as specified and directed for the following :-

One light point/Fan point controlled by one way switch complete all as specified.

One 3 pin or 5 pin 6 Amp socket point outlet on the same board with other switches complete all as specified.

One 3 pin or 5 pin 6 Amp socket point outlet on the independent board complete all as specified.

All as per item No 50 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 1.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified.

S&F modular switch 1 way , 6 Amp, 1 module, as per existing model and type complete all as specified.

S&F modular switch 1 way , 16Amp, 1 module, as per existing model and type.

S&F modular socket on existing plate, 6Amp, 2/3 pin combined, 2 module as per existing type and model complete all as specified.

S&F modular socket on existing plate, 6Amp/16Amp combination, 2/3 pin combined, 2 module as per existing type and model complete all as specified.

S&F modular fan regulator 2 module SP, 240Volt complete all as specified.

Taking down old U/S sub main wiring of any size complete all as specified.

M&L concealed type submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface by putti/cement and paint complete all as specified.

M&L concealed type submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface by putti/cement and paint complete all as specified.

Taking down old U/S rusted main switch/DB of any size capacity complete all as specified.

S&F of Sheet metal enclosure distribution board , double door powder coated, protection class IP-42 suitable for mounting MCBs confirrming to IS-13032, IS-632,BS5484 complete all as specified of following sizes :-

4 way TPN with busbar 415 volts (double door type) complete all as specified.

12 way SPN with200 Amp rated busbar 240 volts (double door type) complete all as specified.

8 way SPN with200 Amp rated busbar 240 volts (double door type complete all as specified.

4 Way SPN with 200Amp rated busbar 240V (Double door type) complete all as specified.

S&F MCB 240 volts 10 KA, rupturing capacity fixed in DB's of the undermentioned type and rating complete all as specified.

MCB SP 240 volts 10-40 Amps

MCB SPN 240 volts, 40 Amps

MCB 4P 415 volts, 63 Amps 16 KA

S & F in repair LED batten 20watt suitable for 1200mm long with G-13 lamp holder T5 and T8 , housing finished in alluminium powder coating complete with all accessaries complete all as specified.

S&F in repair LED luminaire 600mmx600mm, 35/36 watt cool white, 240V AC recessed type with high efficiancy PMMA diffuser soft glare free light complete with driver ,holder, LED lamp suitable for false ceiling including connecting up with driver three core flexible copper condutor cases of suitable size complete all as specified.

S&F in repair LED luminaire 600mmx600mm, 35/36 watt warm white, 240V AC recessed type with high efficiancy PMMA diffuser soft glare free light complete with driver ,holder, LED lamp suitable for false ceiling including connecting up with driver three core flexible copper condutor cases of suitable size complete all as specified.

S&F in replacement sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 volts. complete all as specified.

Supply and fix in replacement ceiling rose surface type, 2-3 terminal 65x50mm,complete all as specified.

Supply and fix decorative frosted glass wall lights / wall lamps with arrangements of mounting LED bulb i.e. having B22 base indoor type chrome finish base with arrangements of wall mount/ flush mount including required screws complete all as specified.

Rajesh Mishra (BID ID -3502256)

K.S. CONSTRUCTION (BID ID -3496144)

Tulsi Enterprises (BID ID -3495806)