Master Sewerage Scheme Faridabad- Repair/rehabilitation (Civil, Mechanical, Electrical) of IPS Sainik Colony Gate No.02 and IPS Palla of Badshapur Zone, Faridabad and all other works contingent thereto.

Amount

Supply and Erection of PC batten /LED batten (20Wattage, 3000kCCT) , Product dimension in mm (1140x23x38) for surface and suspended applications. PC housing with PC diffuser and spring steel clamps for surface mounting arrangement.

Supply installation testing and commissioning of Pressure/Vacuum Gauge (-760 mmHG to 0) Bourdon Type SS Body 4 Inch Bottom Connection Glycerin Filled

Supply installation testing and commissioning of 25A Phase Corrector for Transformer

Supply installation testing and commissioning of 50A Phase Corrector for Pumps

Supply installation testing and commissioning of 10 Sqmm Aluminium 4 core armoured Cable.

Supply installation testing and commissioning of 70 watt LED street light (70Wattage, 5700k CCT) , Product dimension in mm (362x232x72)

Supply installation testing and commissioning of LED Post top 20watt street light (20Wattage, 5700k CCT) , Product dimension in mm (330x330x405)

Supply and erection of DN 600 PN 10 Electromagnetic flowmeter (600mm) for sewage water Technical Specifications for Electromagnetic Flowmeter Process Data Fluid : Sewage Water Operating Pressure : Please Specify Operating Temperature : 50 Deg. C. Electromagnetic Flow Sensor Model : Optiflux 2000 Type : Pulsed DC Meter size : Refer table below Flow tube : SS 304 Coil housing : Fully welded Sheet Steel, PU coated Liner : Hard Rubber Electrodes : SS 316 Grounding type : Rings Grounding ring material : SS 316 Process connection : Flanged to DIN PN10 (fully welded) Flanges : CS, SORF Area classification : Non-Hazardous Cable entry : M20 x 1.5 Protection class : IP 67 Electromagnetic Signal Converter Model : IFC 100 Cable length : 20 Meters. Mounting : Remote wall mounted Output : 4-20mA, HART plus Pulse/Frequency plus Status Accuracy : ± 0.5% of measured value Display : Large back lit LCD Display, fully programmable Parameters : Actual flow rate, totalized flow (10 digit), flow direction, flow velocity, conductivity, mass flow rate (at constant density) Diagnostics : Empty pipe detection, Electrode error, Noise, Coil temperature, Coil resistance, Conductivity etc Power supply : 85-250VAC, 48-63Hz Housing : Die cast Aluminium with PU finish Cable entry : M20 x 1.5 Area classification : Non-Hazardous Protection class : IP 67 Accessories : NA

Supply installation testing and commissioning of Horizontal dewatering motor Pump set of 2.5HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of mechanical coarse bar screen CW: 1500 mm CD: 8000 mm WD: 1500 mm Bar Spacing: 20 mm Bar Size: 10x50 mm Inclination: 75degree MOC: SS-304 alongwith Panel and Sensor for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of SS body control Panel for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of Belt Conveyor for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of energy efficient 200W Lamps including fittings on High Mast complete in all respects (6 for High mast and 4 on building)flood light (200Wattage, 5700k CCT) , Product dimension in mm (350x285x85) for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply of Safety Equipment`s like gloves 2 pair, Fire extinguisher (min. 5), rubber mat (05meter) etc.

Supply installation testing and commissioning of Non Clog HORIZONTAL PUMPS of 200cum/hr@18m of 30HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Enginee- in-Charge complete in all respect.

Supply installation testing and commissioning of 10 SQMM Copper 3 core armoured Approved make as per the satisfaction of engineer in charge.

Supply installation testing and commissioning of 6 SQMM Copper 3 core armoured Approved make as per the satisfaction of engineer in charge.

Supply of 2.5 SQMM Copper 3 core armoured cable Approved make as per the satisfaction of engineer in charge.

Supply, installation, testing and commissioning of main LT panel made up of 14/16 SWG MS CR sheet duly powder coated with siemens Gray shade, dust and vermin proof with heat shrink sleeved Aluminium Busbar of suitable size comprising of following switchgear:- 1. main supply incomer 2000ACB 4 pole 2. DG set supply incomer 2000A ACB 4 Pole 3. Outgoing Feeder 1 800A ACB 3 Pole 4.Outgoing Feeder 2 800A ACB 3 Pole 5.Outgoing Feeder 3 800A ACB 3 Pole 6.Outgoing Feeder 4 800A ACB 3 Pole 7.Outgoing Feeder 5 800A ACB 3 Pole 8.Multifunction meters with each feeder Approved make (LandT, Schneider, Siemens etc.) as per the satisfaction of engineer in charge

Bidder Name

Amount

Anil Dahiya Contractor(GSTN-NA)--1035853

M/s Shree Jee Enterprises(GSTN-NA)--1038578

M/s Shree Jee Enterprises

M/s Shree Jee Enterprises