Construction of Segregation Shed and stroage shedat at Tajapura Panchayat

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and bailing out water whenever necessary et complete complying with standard specification

Cement concrete 1:4:8 mix using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying standard specification.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x43/8"x23/4" and conveyance of all materials to site and all labour charges etc complete -10 cum

Plastring Cm 1:5,12mm thick including cost and conveyance and all labour charges etc Complete

Grano flooring CC 1:2:4 using 12 to 6mm Chips including cost and conveyance and all labour charges etc Complete

Plain Cement Concrete 1:2:4 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers

Painting with Plastic emulsion including cost and conveyance and all labour charges etc Completeincluding all labour charges etc

Painting two coats using steel New door including cost and conveyance and all labour charges etc Complete

Provision for steel tube 60.3mm OD & 3.6mm tk including fabrication and all labour charges for erecting etc complete

Provision for Square hollow section 25x25x2.6mm including fabrication in all labour charges in all etc

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification.

Painting two Coats over New iron Works using best quality of enamel paint including cost and conveyance of materials and labour charges etc complete.

Please Enable Macros to View BoQ information