Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹40.6 LAccepted-AOC NO 1 A WING 3RD FLOOR PARSN MANERE ANNA SALAI CHENNAI 600 006 | CHENNAI | CHENNAI | TAMIL NADU | 600006 | ₹40.6 L | L 1 | Accepted-AOC L 1 |
| 2 | L 2₹41.9 LRejected-Finance | ₹41.9 L | L 2 | Rejected-Finance L 2 |
Tender Value
Refer Docs
EMD Value
₹77,240
Closing Date
14 May 2026, 3:00 pmClosed
Chief Engineer
Chief Engineer, VOC Port
Renovation work to the existing building available in the Museum Premises in VOC Port
2026_VOCPT_277017_1
VOCPA- CIV-OFCMB-MNT-REAR-V1-26
Limited
Civil Works
30 days
VOC Port
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹77,240
27 May 2026
8 May 2026
15 May 2026
8 May 2026
14 May 2026
8 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1.01 | Dismantling Asbestos Cement Sheet roofing (AC Sheet) incliding ridges, hips, velleys, gutters, etc., and stacking the serviceable materials and dispostal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. | - | SQM | 221.5 | - | Item 1 |
| 1.02 | Providing and laying Plain Cement Concrete 1:2:4 (One part of cement, 2 parts of Coarse M. Sand (Crushed Stone Sand) & 4 Parts of 40 mm nominal size metal ) for foundation using 40 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. | - | CUM | 6,876 | - | Item 2 |
| 1.03 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers. | 1 | CUM | 8,431 | ₹8,422.57 | Item 3 |
| 1.04 | Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers. | - | MT | 89,704 | - | Item 4 |
| 1.05 | Providing Form work including centring, shuttering for foundation footings of columns, mass concrete so as to give a rough finish shuttering and propping etc., complete complying with AISS and as directed by the departmental officers. | - | SQM | 430 | - | Item 5 |
| 1.06 | Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers. | - | CUM | 7,861 | - | Item 6 |
| 1.07 | Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer). : | 3,300 | KG | 133.1 | ₹4,39,230 | Item 7 |
| 1.08 | Providing and fixing Precoated metal sheet 0.45mm for Roofing with hot dipped galvanised prepainted steel sheet for roof of make TATA or equivalent including cost of metal sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers. | - | SQM | 745.5 | - | Item 8 |
| 1.09 | Providing and fixing the Aluminium Composite Panels (ACP) of 3.25mm thickness for Ornamental Elevation with #3M# brand two way tape and 1.2mm thick Aluminium channels /box section of size 50 x 20mm with weight not less than 2 kg. / 12 ft. to fix the ACP, fixed rigidly with the existing wall using suitable fasteners and neatly finishing the joints with DOW corning all weather sealant grade -789 including finishing the sharp edges etc., complete as per the approved design etc., complete and as directed bythe departmental officers. | - | SQM | 4,836 | - | Item 9 |
| 1.1 | Providing and fixing of 12.5 mm thick Gypsum Board False ceiling with suspended GI channels for every 2'-0# x 2'-0# c/c fixed with brass screws, etc. The surface joints to be finished with paper tape and putty etc.,. The cost including for all the materials, labour charges ... etc. complete and as directed by the departmental officers. | - | SQM | 750 | - | Item 10 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
BOQ_323539.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid