PROVN OF PARKING SHEDS AT SMQs/OMQs, SPL REPAIR FOR REPLACEL OF FLAME PROOF LIGHT FITTINGS WITH LED INCL REPLACE OF WIRING AND DISTRIBUTION BOX IN VARIOUS DANGER BLDG(PH-I) AND PROVN OF EXHAUST FAN IN SMQs(PHASE-III) AT KV AREA AT AF STN UNDER GE(AF)

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed.

M & L for Plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in in foundations, filling and mass concrete etc complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulders,deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100 mm thick, plain cement concrete 1:2:4, type D-2 (using 40mm graded stone aggregate) as in floors and hardstanding etc, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

S & F Mild steel screw bolts, 11 to 15mm dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 5cm long complete all as specified and directed.

S & F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M & L for preparation of newly steel & iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for flameproof point wiring surface/ concealed type with 1.5 Sqmm (nominal cross sectional area) with PVC insulated unsheathed single core stranded copper conductor, Zero Halogen flame retardant (ZRFR) cable of working voltage 1100 volts grade conforming to IS-694 drawn in and including steel surface conduit with all fittings & accessories such as FLP flexible conduit, FLP junction box, bends etc. with 1.60 mm thick pressed steel or mild steel sheet sunk box, including 1.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed single core stranded copper conductor Zero Halogen Flame Retardant (ZRFR) cable as earth continuity conductor connected to main switch/ 'DB's or common earth dolly for one fan/light point controlled by one 16 amps single pole FLP switch including taking down old unserviceable point wiring complete all as specified and as directed.

All as per item No. 12 above but wiring with cables of size 4.0 sqmm & cables of size 4.0 sqmm as continuous earth wire for 3 pin15 Amps socket outlet on Independent board complete all as specified and directed.

S&F in repair switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

S&F in repair Flame proof switch socket & plug combined, cable termination box in LM6, 16A, 250V, 4P+earth (5 Pin) having fullproof interlocking system i.e plug can not be removed in ON condition, complete all as specified and directed. (Make : Bajaj/Crompton Greaves/Sudhir)

S&F in repair LED light fittings, 1 x 20 Watt, flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable and flexible steel Conduit of suitable size upto nearest ceiling rose complete all as specified and directed.(Make : Bajaj/Crompton Greaves/Sudhir)

S&F in repair flameproof cum weather proof LED well Glass fittings, 36 W (COB type) having IP 66 degree of protection made out of Cast aluminum alloy LM-6, temp glass : T-6, Anti corrosive epoxy powder coated (Shade 631 of IS5), all as per IS / IEC 60079-1:2007, complete all as specified and directed. (Make : Bajaj/Crompton Greaves/Sudhir)

S&F in repair flameproof cum weather proof LED flood light fittings, 60 Watt having IP 66 degree of protection made out of Cast aluminum alloy LM-6, Heat resistance and toughened glass, Anti corrosive epoxy powder coated (Shade 631 of IS5), all as per IS / IEC 60079-1:2007, complete all as specified and directed.(Make : Bajaj/Crompton Greaves/Sudhir)

S&F in repair Flame proof exhaust fan, 12", 1440 RPM, IP 66, made out of dynamically balanced hub of Aluminum alloy LM-6, having air discharge capacity of 1250 CFM coupled with flameproof motor of 0.25 HP single phase,including making hole in existing walls and making good the disturbed surface to match with the existing surface complete all as specified and as directed. (Make : Bajaj/Crompton Greaves/Sudhir)

S & F in repair louvers 12" for Flame proof exhaust fan, 12", 1440 RPM complete all as specified and as directed.

M & L for Sub main wiring with two runs of 6 sqmm (Nominal area) single core cable FRLS PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through and including steel conduits of suitable size, fixed to wall/ceiling etc including 6 sqmm (nominal area) single core, FRLS PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point including steel conduits of suitable size including taking down old unserviceable sub main wiring complete all as specified and as directed by Engineer-in-charge. (Note : Steel Conduits, two run cables and one run of earth wire shall be measured as one length.)

S&F in repair Flame proof sheet metal enclosure for double door IP 66 MCB DBs, phosphatised, powder coated including Triple Pole & Neutral (TPN) 80 Amp as incommer and 40 Amp DP MCB - 08 Nos as outgoing connection, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position complete all as specified and directed.(Make : Bajaj/Crompton Greaves/Sudhir) Note : Rates of MCB TPN & SPN shall be included in the quoted rates.

M & L in repair for Flame proof junction box, with plain cover 3/4" ET complete all as specified and as directed.

M & L in repair for Flexible metalic hose conduit of dia 25 mm complete all as specified and directed.

M & L for Point wiring(concealed) with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC conduits with all fittings and accessories of PVC conduits (like Tee, bend etc.) complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point including concealed pressed steel terminal box of required size factory made with top cover of ISI marked plastic laminated sheet of required colour for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one, one way switches including cutting chases and making good the disturbed surface to match with the existing complete all as specified and directed by the Engr-in-Charge.

S & F switch piano, 5 Amp single pole, flush type one way 230 volts complete all as specified and as directed.

S & F Ceiling rose, 3 terminal, PVC/polycarbonate, isolated body complete all as specified and directed.

S & F Exhaust fan, heavy duty, 300 mm sweep with louver, 1400 rpm, AC, single phase 230/240 volts, metal body, powder coated complete with all accessories and electric connection including making suitable hole on wall by cutting existing wall and making good the disturbed surface to match with the existing upto building height G+2 and writing MES No. on exhaust fan with synthetic enamel paint complete all as specified and directed (Make : Crompton Greaves/Bajaj/Usha/ Havells/Orient as approved) Note: An amount of Rs. 8210.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

B L SHARMA

M/S DEY ENTERPRISE

M/S. KUMAR CONSTRUCTION CO.

M/S. JOGINDER KUMAR GOYAL

M/S. VINITA CONSTRUCTION

M/S MANODEEP CONSTRUCTION

M/S ASHOK ENTERPRISE