8421/E8 REPAIR TO FLOORING TILING SUNKEN FLOOR JOINERY INTERNAL WATER SUPPLY SANITARY FITTINGS PLASTERING ROOF TREATMENT AND REPAIRS TO DRAIN SEWAGE LINE PCC PATH HARD STANDING AND CERTAIN MISCELLANEOUS WORKS AT CQAE WE UNDER AGE B R WES

Amount

Demolition of brick work or stone masonary built in cement mortar including all quoins arches pillar etc but excluding ashlars facing dressed built stone work and pre-cast concrete article complete all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1sqm but n.exc 2 sqm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections , inlcuding cleaning for refixing/ offering under credit complete all as specified and directed.

All as per item no 09 above but 20 mm bore complete all as specified and directed.

Material and labour for Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 Type D2 using 40mm graded stone aggregates as in foundations, filling and mass-concrete complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 Type B1 using 20 mm graded crushed stone aggregate as in band, coping, bed block for fixing post/grill including weathering, slightly rounded for chamfered angles and throating,complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for Non skid ceramic coloured joint free tiles of size 600mm x 600mm x 7 to 8mm thick,sharp edged (joint free), in floor etc. set & jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in Cement mortar (1:4) complete all as specified and directed.

Material and labour for Non skid ceramic coloured joint free tiles 600mm x 600mm x 7-8 mm thick as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick cement bedding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for Non skid ceramic coloured joint free tiles of size 400mm x 400mm x 7 to 8mm thick,sharp edged (joint free), in floor etc. set & jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in Cement mortar (1:4) complete all as specified and directed.

Material and labour for Non skid ceramic coloured 400mm x 400mm x 7-8 mm thick joint free tiles as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick cement bedding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for Non skid ceramic coloured 300mm x 300mm x 7-8 mm thick joint free tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Material and labour for Glazed ceramic coloured tiles 450mm x 300mm x 6-7 mm thick in vertical surfaces such as skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding 10mm thick screeding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance exc 1km but n exc 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as directed.

Material and labour for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including dismantling complete all as specified and directed.

Material and labour for Chequred cement concrete tiles 300X300X25mm thick, with white cement and pigment, set and jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Material and labour for screed bed or bedding layer of cement mortar 15 mm thick in cement mortar 1:6 for laying floor finishes all as specified and directed

Material and labour for walling with squared rubble masonry regular coursed, Secunderabad / Bangalore type, well bonded, bedded and solidly hearted, built in Cement mortar 1:6 complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20mm graded aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Material and labour for brick work with subclass 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendring 10mm thick cement mortar 1:6, on fair faces of brick work or concrete surface complete all as specified and directed.

Material and labour for plain solid straight chowkats and frames 2nd class hard wood, wrought framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Material and labour for 35mm thick 2nd class hard wood plain framed panelled shutters (any number of panels) with panels of 12 mm thick veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkats complete all as specified and directed.

Material and labour for 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

Material and labour for 30mm thick, 2nd class hard wood (Hollock) glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc for window/ ventilator edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc, with member size as specified in SSR Part-I clause 8.24(a) complete all as specified and as directed.

Supply and fix 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in pelmets, cupboard shutters, shelfs etc complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified including dismantling of old unserviceable asbestos sheet .

Supply and fix in repairs Butt hinges medium weight MS cold rolled, 100 mm size complete all as specified and directed.

All as per Sl item No 36 here in before but 75 mm size.

Supply and fix in repairs Alumunium anodised barrel tower bolt of exturded section of size 150 mm long complete all as specified and directed.

Supply and fix Extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

All as per Sl item No 39 here in before but 75 mm size.

Supply and fix in repairs 300mm Aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Supply and fix in repairs Floor door stoper of alumunium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fix Hasp and staple of 75 mm ,safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix 4mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

Supply and fix GI tubing medium grade, 15 mm bore with all fittings to wall/ceiling or laid in floors etc all as specified and directed .

Refixing old steel tubing 15mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Supply and fix GI tubiing medium grade, 20 mm bore with all fittings to wall/ceiling or laid in floors etc all as specified and directed.

Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Removing existing unservicable tar felt on any type of any description from roof slab along with screed bed , cleaning the surface and removing the debris to a distance exc 1kmbut not exceeding 5km from starting point all as directed.

Dismantling & removing existing sunken floor concrete filling from sunken slab complete all as directed and specified

Taking down old damaged CI/PVC waste pipes of any dia from sunken floors complete all as specified and directed

Supply only acrylic based polymer water proofing compound ISI marked . Make: conplastx 421 IC of M/s Fosroc chemical Ltd or equivalent)

Material and labour for APP based polymeric bitumen primer @ 0.20 Kg/sqm and providing 4mm thick APP Modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gm/sqm having softening point not less than 150 degress centigrade having tensile strength of 650N/5cm and 350N/5cm in longitidunal and traverse directions respectively of the reinforcement , tearing strength of 180 N by torch application including min 10cm side over lap & 15cm end lap and applying a coat of blown bitumen @ 1.20 kg/sqm hot bitumen 90/15 over and below the membrane finished all as specified and directed by Engr-in-charge

Material and labour for 40mm thick plain Cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as in sub base fooring complete all as directed.

Material and labour for removing existing water proofing treatment on RCC roof slab including taking out old water proofing plaster of any thickness and cleaning the roof surface with wire brush and finally cleaned with water and applying water proofing treatment on horizontal and vertical surfaces with polymeric water proofing membrane at the rate of 4 Kg/Sqm reinforced with minimum 160 gram/Sqm non-woven polyester mat over a coat of oil bound bitumen primer at 0.20 litres/Sqm and a coat of hot blown bitumen 90/15 at the rate of 1.20 Kg/Sqm applied on the top of polymeric membrane and finally finished with a coat of bituminous aluminum paint at the rate of 100 gram/Sqm all as specified and directed.

Material and labour for 10mm thick rendering on concrete surfaces of roof in CM 1:4 mixed with water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: Supply only WPC measured and paid separately.

Supply only integral water proofing compound

Material and labour for Plain Cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as directed.

Material and labour for applying three coats of brush bond acrylic based cementitious material of approved quality (Dr. Fixit- Pidifin 2K or Brushbond RFX of Fosroc India (P) Ltd. or equivalent) for sunken portion treatment all as per manufacturer instruction and providing 150 micron thick polythene film over bitumen primer @ 0.5 kg /Sqm all as specified.

Dismantling of existing over head water tank of capacity exc 250 Ltrs and n.exc 500 ltrs complete all as specified and directed.

Supply and fix 500 litre capacity Rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 25mm bore brass float valve complete all as specified and directed.

Supply and fix in repair 25mm bore Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair Stainless Steel Plate rack of size 900mm x 600mm x 300mm width, made with 1mm thick plain SS sheet complete all as specified and directed.

Dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out of trenches or walls any bore including fittings complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed.

All as per item No 66 above but 75 mm bore.

Supply and fix PVC (SWR) bends of any radius, 110 mm bore with assessed door.

All as per item No 68 above but 75 mm bore with assessed door

Supply and fix PVC (SWR) branch piece single Y equal or unequal 110 mm bore.

All as per item No 70 above but 75 mm dia.

Supply and fix PVC (SWR) floor trap plain, diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed.

Material and labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, including dismantling existing one complete all as specified and directed.

Material and labour for 50mm thick Sand filling under floors including levelling,watering and consolidation complete all as specified and directed.

Material and labour for servicing / easisng of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hanges,handles ,stay etc and making good disturbed portion painting all as specified as directed by Engineer-in-charge .

Material and labour for servicing / easing / resecuring glazed aluminium doors by easing, adjusting the floor door spring/door closer, securing of styles mulions nails hinges pivot cleats fittings replacing worn out rubber packing, glazing clips, hand snap beading, servicing of locks etc . all as directed by Engg-in- Charge.

Supply and fix in repair Chromium plated high quality Drapery rod , powder coated, 25 mm dia complete all as specified and directed.

Supply and fix in repairs Bracket / knob for drapery rod, high quality,powder coated, suitable for 25mm dia pipe complete all as specified and directed.

Supply and fix in repairs powder coated Anodised aluminium door shutter with frame of required size with fixed 5mm thick sheet glass on top panels and panels portion fitted with 12 mm thick prelaminated particle board exterior grade decorative lamination on both sides using aluminium frame section 101.60 x 44.45 x 2.40 mm thick and flazing clip including rubber beading PVC protected sheeting its removal after fixing the frame and tower bolt 200 mm long 2 Nos per door standard handle both inside and out side joining cleats hinges, high quality floor door spring and mortice lock including taking down old frame with shutters all as per speficied and directed by Engr-in-Charge.

Supply and fix in reapirs powder coated Anodised aluminium three track sliding window with frame comprising of aluminium frame of channel fixed to walls and Two Nos of shutters 5 mm thick tinted glass,and One Nos shutter of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm including necessary rubber gaskats and aluminium beadings & clips of 0.90 mm thick etc and finished with metal paste on gaps of the surface in contact with masonry walls and necessary handles and locking arrangements including taking down old frame with shutters all as specified and as directed

Dismantling Old Unservicable snap grid false ceiling including all fittings and fixtures

Supply and fix powder coated GI snap grid frame work for false ceiling of size 605x605mm with hangers 4-6mm dia GI (Upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x63mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including 12mm thick pre-painted gypsum boards , inserted to GI frame work as false ceiling , size of board 600x600mm including two coats of distemper complete all as per manufacturers instruction and as specified and directed by Engr-in-charge.

Supply and fix solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm X 19mm MS square tube EPDM rubber gasket weather seal to be provided throughout the frame. The profile shall be mitred cut at two corners and jointed by inserted 2 mm of 150 mm long bracket of 15X 15 mm MS square tube inside the 19X19mm MS square tube and suitably screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 06 Nos screws to be provided for each frame all as specified and directed. Note: Cutting holes, providing concrete for hold fast finishing all disturbed surfaces in CM 1:4 around door frame etc are deemedto be included in this item.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded /sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as per specification & drawing complete all as specified and directed.

Material and labour for approved quality stone slabs (Locally available Bangalore type) self faced 50 to 75mm thick hammer dressed on face (benching not exceeding 40mm) inside of drain as required not less than 45cm in length jointed, pointed and finished in CM 1:6 including dismantling of old stone slab with PCC complete all as specified and directed.

Material and labour for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition and breaking up Salt glazed stone ware/ AC Reinforced concrete pipes 150mm dia, laid in trenches set in cement mortar including PCC bed all as specified and directed.

Material and labour for concrete bed to drain pipes in PCC 1:4:8 type D2 using 40mm graded stone aggregate including packing under and haunching against sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed.

Material and labour for salt glazed stone ware drain pipe Gde Á’ 150mm dia laid in trenches and jointed all as specified.

Material and labour for Precast RCC cover slabs for drain, manholes etc 1:2:4, type B1, using 20mm graded stone aggregates, set in CM 1:4 including necessary form work and finishing the exposed surfaces of concrete even and smooth without using extra cement complete all as specified.

Supply and fix Mild Steel TMT bars 10mm dia and over, cut to length bent to shape requried including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed.

Supply and fix Mild Steel TMT bars 6 to 8mm dia, cut to length bent to shape requried including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth arround in layers not exc.25 cm and removing surplus soil to a distance n.exc 50 mtr complete all as specified and directed.

Material and labour for plain Cement Concrete 1:2:4 Type B2 using 40 mm graded stone aggregate as in post holes complete all as specified and directed.

Supply and fix in repair Mild steel work in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified and directed.

Supply and fix Mild steel screw bolts of 11 to 15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm and not exceeding 10 cm long complete all as specified and directed.

Supply only Chain link Mild Steel Galvanized fencing of mesh size 100x100mm and dia of wire 3.4mm thick complete all as specified and directed.

Fixing only in repair of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply and fix in repair mild steel framed work such as doors or gates of angles or other section with gusset plates, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging of sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete.(GDE Fe 410- or Fe-310-0.)all as specified and directed.

Material and labour for cutting, grinding and finally polishing with Wax of existing terrazzo flooring/dado etc complete as specified and directed by Engr-in-charge.

Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Supply and fix in repair harrision rails, anodised aluminium alloy, chrominium plated with fixing brackets, stops, rollers complete all as specified and directed.

Supply and fix in repairs tubular towel rail brass chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

Supply and fix in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing etc. complete all as specified and directed.

Supply and fix in repairs, vitreous China wash hand basin, white, flat back size 450 x 300mm including 15mm dia chromium plated pillar taps, 32 mm bore brass waste fitting, 450 mm long HDPE PVC connection, 15mm dia stop cock CP, 32mm bore 600 mm long HDPE waste down pipe including CI brackets all as specified and as directed.

Supply and fix in repairs, vitreous China wash down water closet pan (Pedestal Pattern) white including fixing bolts connecting to flushing cistern complete all as specified including plastic water closet seat, closed pattern with flat bottom and cover and chromium plated hinging device all as directed.

Supply and fix Vitreous china squatting pan of Orissa patten of size 580 x 440mm white, back inlet with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc, fixed in repair complete and making good to floor in cement mortar 1:3 complete all as specified and directed.

Supply and fix in repairs stainless steel sink of bowl size 410 x 330x 160 mm overall size 495 x 420 mm with 1 mm thick with plugs, washers and wastes fixed to wall with brackets/ in RCC platform including bedding in cement mortar on to dwarf including connecting union to pipe complete all as specified

Supply and fix in repairs 10 litres capacity PVC low level flushing cistern valve less syphonic action type, white with inlet, ball valve, float and handle, bracket etc including flush pipe of PVC 32 mm bore of suitable length and connecting to water closet all as directed.

Supply and fix in repair Single lever wall mixer, non telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, complete all as specified and directed.

Supply and fix in repair pillar tap cast copper alloy with capston head chromium plated screwed down high premier with long screwed shanks and fly nuts screwed for iron pipe and fixed (15 mm dia) all as specified and directed.

Supply and fix in repairs bib taps brass Chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, 15mm bore complete all as specified and directed.

Supply and fix in repairs stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed.

Supply and fix in repairs concealed stop valves, cast copper alloy, fancy type with long shank and cup, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

Supply and fix in repair Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair Brass chromium plated health faucet high quality including fixing to 15mm bore steel pipe or union complete all as specified and directed.

Supply and fix in repair Brass chromium plated 2-in-1 tap 15mm bore for fixing of health faucet complete all as specified and directed.

Supply and fix in repair 600 mm length PVC connections 15 mm size with PTMT nuts complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and as directed.

Supply and fix in repairs Hasp and staple, 100 mm size safety type, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as directed.

Supply and fix in repairs Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as per specified and directed.

Material and labour for Preparation of plastered or un plastered old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed. (with necessary formwork/rope and pully arrangement upto heaight of 10mtr)

All as per item No 126 above but on ceilings complete all as specified and directed.

Material and labour for washing, rubbing down and stopping of distempered surfaces of walls and applying one coat of washable distemper oil emulsion complete all as specified and directed. (with necessary formwork/rope and pully arrangement upto heaight of 10mtr)

All as per item No 128 above but on ceilings complete all as specified and directed.

Material and labour for complete removal , washing rubbing down and stoping of old painted of wall surfaces and applying one coat of cement base paint complete all as specified and directed. (with necessary formwork/rope and pully arrangement upto heaight of 10mtr)

Material and labour for compete removal , peparation of old decorated wall surface including cleaning with water rubbing of old fungus complete removal and and applying three coat of weather proof paint "APEX" of Asian paint complete all as specified and directed. (with necessary formwork/rope and pully arrangement upto heaight of 10mtr)

Material and labour for complete removal , preparation of old decorated wall surface including cleaning with water and applying one coat of plastic emulsion paint complete all as specified and directed.

Material and labour for Preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 133 above but on steel surfaces complete all as specified and directed.

M B Patel and Sons

S R Trading Co

Vivek Constructions