MODERNIZATION OF LINK ROAD Under the Scheme Special Assistance To states For Capital investment 2025 26 for Shampur to Bharatpur

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER, Provincial Division PWD B&R SAS Nagar

Name of Work: Modernization of Rural link road under the scheme special Assistance to states for capital investment 2025-26 for Shampur to Bharatpur. Including 5 years Maintenace (1 year Defect Liability+ 4 Years Of maintenance)

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Unit Rate Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Dismantling brick work tile, masonry or tile lining i.) Dismantling dry brick work (8.5(i)) Per Cum Excess(+) Full Conversion INR

Brick on End Edging Providing and laying of brick on end edging 6.83 cm wide, 11.11cm long and 22.86 high half brick deep including excavation, refilling and disposal of surplus earth up to 50 mtr complete as per Punjab PWD specifications. 24.14 Per Rmt Excess(+) Full Conversion INR

Water Bound Macadam Grading II (without screening for low volume Roads/undersigned Roads Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications (CSR 24.12ii) Per Cum Excess(+) Full Conversion INR

(i) Brick Bat Per Cum Excess(+) Full Conversion INR

(ii) Bricks Each Excess(+) Full Conversion INR

Making 50 mm x 50 mm Furrows Making 50 mm x 50 mm furrows 45 degree to the center line of the road and at one meter interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead complete as per technical (Full surface area will be measured for payment) 0.000 Per Sqm Excess(+) Full Conversion INR

Surface dressing Providing and laying surface dressing in singlecoat using crushed stone aggregates of specifiedsize on a layer of bituminous binder VG-10 @ 1kgper sqm laid on prepared surface after cleaningthe road surface and rolling with 8-10 tonnesmooth wheeled steel roller complete as pertechnical clause 509 of MORT&H specifications 24.24 Per Sqm Excess(+) Full Conversion INR

Tack coat with Bitumen VG-10 Bulk Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared ituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications 24.16b Per Sqm Excess(+) Full Conversion INR

Open - Graded Premix Surfacing 20mm thickness Open - Graded Premix Surfacing 20mm thickness Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications 24.25 (a) 4.25 (a) Per Sqm Excess(+) Full Conversion INR

Seal coat Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications 24.28 c Per Sqm Excess(+) Full Conversion INR

Earth work excavation in ordinary soil, exclusive of compensation of earth:- a) Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods. Per Cum Excess(+) Full Conversion INR

Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material type B at locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 to MORT&H specifications Per Mtr Excess(+) Full Conversion INR

Village Board Providing & fixing of Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD/MORT&H specifications Each Excess(+) Full Conversion INR

Cautionary sign board 600x600x600mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting type IV as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mmmm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012. (Including Definition Plate 600x200mm) Each Excess(+) Full Conversion INR

Mandatory sign board 600mm circular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. Fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67- 2012 . Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012. (Including Definition Plate 600x200mm) Each Excess(+) Full Conversion INR

Place Identification sign board 900x600mm (Double Sided) rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause6.9 of IRC 67-2012 for retro reflective sheeting &a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 Each Excess(+) Full Conversion INR

Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications. Per Sqm Excess(+) Full Conversion INR

Construction of 2'-0" Hume Pipe culvert complete in all respect as per PWD Specifications. Each Excess(+) Full Conversion INR

Providing and laying 80 mm thick (M-40 Grade) factory made cement concrete interlocking paver blocks after dismantling of existing surface complete in all respect as per PWD Specifications. Per Mtr. Excess(+) Full Conversion INR

Videography of Proposed/Execute site of work of Link Roads before & after completion of work two times (stilling & video Job Work) Job Excess(+) Full Conversion INR

Heritage & Culture Cess @ 1.00% percent Excess(+) Full Conversion INR

Routine Maintenance after completion of Construction work as per periodicity to routine maintenance mentioned in the technical specifications. For 2nd Year KM Full Conversion INR

Routine Maintenance after completion of Construction work as per periodicity to routine maintenance mentioned in the technical specifications. For 3rd Year KM Full Conversion INR

Routine Maintenance after completion of Construction work as per periodicity to routine maintenance mentioned in the technical specifications. For 4th Year KM Full Conversion INR

Routine Maintenance after completion of Construction work as per periodicity to routine maintenance mentioned in the technical specifications. For 5th Year KM Full Conversion INR

Heritage & Culture Cess @ 1.00% percent Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Quoted Rate in Words INR Two Lakh Forty Two Thousand Two Hundred & Fifty One and Paise Fifty Three Only

Please Enable Macros to View BoQ information