Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹3.0 CrAccepted-AOC | ₹3.0 Cr | L 1 | Accepted-AOC Lowest One work order issued on 14.02.2023 |
| 2 | L2₹3.1 Cr+₹7.7 L (2.53%)Rejected-Finance | ₹3.1 Cr+₹7.7 L (2.53%) | L2 | Rejected-Finance Second Lowest unsuccessful tenderer EMD amount to be refunded |
| 3 | L 3₹3.2 Cr+₹11.8 L (3.89%)Rejected-Finance | ₹3.2 Cr+₹11.8 L (3.89%) | L 3 | Rejected-Finance Third Lowest unsuccessful tenderer EMD amount to be refunded |
| 4 | L 4₹3.4 Cr+₹39.0 L (12.8%)Rejected-Finance NO 3 109 MIDDLE STREET ELANGAKURICHY POST TRICHY DISTRICT 621 302 | ELANGAKURICHY | TRICHY | TAMIL NADU | 621302 | ₹3.4 Cr+₹39.0 L (12.8%) | L 4 | Rejected-Finance Fourth Lowest unsuccessful tenderer EMD amount to be refunded |
Tender Value
₹3.4 Cr
EMD Value
₹1.8 L
Closing Date
21 Jan 2023, 6:00 pmClosed
Superintending Engineer South Circle TNPHC Ltd
Tamil Nadu Police Housing Corporation Limited South Circle No 1 Inspector Quarters TSP VI Battalion Campus New Natham Road Madurai 625014
Construction of New building with necessary Infrastructure and ambience for establishing DNA Analysis Division in the Regional Forensic Science Laboratory with development works at Pillayarpatti Village in Thanjavur District
2023_TNPHC_281577_1
SE/SC No 49/2022-2023 -1
Open Tender
Civil Works
Lump-sum
335 days
PILLAYARPATTI VILLAGE IN THANJAVUR DISTRICT
Refer tender document
7 documents required · 7 mandatory
₹0
₹1.8 L
15 Feb 2023
14 Jan 2023
24 Jan 2023
14 Jan 2023
21 Jan 2023
14 Jan 2023
Amount
1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
2.6) Supplying and filling with 40mm HBSJ
2.7) Supplying and filling with 20mm HBSJ
13.1) Filling with excavated earth
21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m
b. T.W. below 2.00 m length.
23.3) Supplying and fixing of Magnetic door catches
25) Supplying and fixing of MS hold fast
30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)
31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume
37.1) White washing 3 coats (slaked)
39) Supplying and fixing of MS Grills in position
40) Painting 2 coats - New "wood work"
41) Painting 2 coats - New "iron work"
46) Supplying and fixing of 20 mm dia Alu. Hanger Rod
47) Supplying and fixing of Alu. Towel rail 75 cm long
48) Supplying and fixing of 5 pin Coat stand
49) Supplying and fixing of Chromium plated 8 gauge picture hook
50.3) Supplying and planting avenue trees
50.4) Providing Tree guard
51) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark
52) Supplying and laying of PVC Water supply (ASTM) pipe a. 32 mm dia
b. 25 mm dia
52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)
53.3) Supplying and fixing of C.I. steps (5 Kg)
Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket
72) Supplying and fixing of Box type Fibre Fan hook
74) Charges for assembling and fixing of ceiling "Fan"
76) Supplying and fixing of 8 SWG G.I. wire
77.3) Supplying and fixing of TV/Telephone line Socket
77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line
78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)
86) Providing Pre-constructional Anti termite treatment
112) Supplying and fixing of Exhaust Fan 300 mm dia
Annexure 2.1.1) Supplying and filling the basement with gravel
2.1.3) Supplying and filling in foundation and basemnet with Crushed stone sand
3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand
3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand
4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Foundation and basement
6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture
8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Ground Floor
b. In First Floor
c. In Second Floor
9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor
b. In First Floor
c. In Second Floor
10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement
b. In Ground Floor
c. In First Floor
d. In Second Floor
11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) a. In Ground Floor
b. In First Floor
12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8¾ "x 4¼ "x 2") 50mm tk using crushed stone sand with Admixture a. In Ground Floor
b. In First Floor
14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 20mm thick a. In Ground floor
b. In First floor
14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 40MM Thick a. In Foundation & Basement
b. In Ground Floor
c. In First Floor
16.1.1) Precast Jally ventilator 50mm thick using standardised concrete mix M20 Grade using crushed stone sand a. In Ground Floor
18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,
b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works
c. For Square and rectangular columns and small quantities
d. For Vertical wall
f. For Curved surface
21.5.2) Supplying and fixing of soild UPVC door shutter with frame
21.5.3) Supplying and fixing in position of UPVC window of casement type (open) for all sizes
21.5.4) Supplying and fixing in position of UPVC louvered ventilator type for all sizes
22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws
23.1.1) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size a. 900 x 2100mm
26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand
28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand
29.6.3) Supplying and laying of Acid proof floor ceramic tiles using Grout (Tile Joint Filler) using crushed stone sand
29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand
29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand
32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand
33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand
34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand
35.1.1) Plastering in CM 1:3, 12 mm tk. with WPC using crushed stone sand
35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand
36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
38.4.2) Supplying and applying Wall putty over the new cement plastered walls
43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods
44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand a) Providing pit
b) Augering 30cm dia
44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe
50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand
50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 mixed with fibre using crushed stone sand
52.4) Supplying laying fixing and jointing the following PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI specials c. 20mm dia
53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)
53.5) Supplying and fixing of porcelin Wash hand basin (White without Pedestal Type), superior variety of size 550x400mm (22”x16”)
54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)
54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)
56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand
56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand
57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap
58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia
58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.
58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,
59.5.2) Supplying and fixing of Gully Trap using crushed stone sand
60.1) Supplying and fixing of PVC Nahani trap (4way/2way)
61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe
b) 160mm dia UPVC Non Pressure pipe
62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend
b) 160mm dia PVC Bend
62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee
b) 160mm dia PVC Equal Tee
64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/Calling bell
65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point
66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.
67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself.
68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.
71.2) Supplying and fixing of 32 Amps triple pole main switch
75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep
77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.
77.6.1) Run off 2 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.
77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed
79.3.1) Supplying and fixing of 3 Nos. of 63 Amps Fuse Unit
84.4) Run of Main 4 wires of 6 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
84.5) Run of Main 4 wires of 10 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
87.1) Supplying and fixing of Three Phase ELCB/RCCB
87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection (For AC Plug)
97.1.1) Supplying and fixing of Aluminium Partition wall 1/3, 5.5 mm thick plain glass & 2/3 Novapan - 12mm thick
97.2.3) Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with 1/3 panelled with 12mm thick Novapan sheet at bottom and 2/3 glazed using 5.50mm thick Plain glass at top Suitable for door of size a. 1000mm x 2100mm
99.4) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1800 x 2400mm
100) Supplying and fixing of 9 watts LED Bulb
101) Supplying and fixing of 25 watts LED bulb with street light fittings
102) Supplying and fixing of 4'18 watts crystal LED tube light
103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb
104) Supplying and fixing of 12 watts bulb lamp for bulk head fittings
114) Supplying and delivery of following PVC Aluminium armoured LTUG cable a) 3.5 core 120 Sqmm PVC Aluminium armoured LTUG cable
b) 3.5 core 70 Sqmm PVC Aluminium armoured LTUG cable
c) 3.5 core 25 Sqmm PVC Aluminium armoured LTUG cable
d) 4 core 16 Sqmm PVC Aluminium armoured LTUG cable
e) 4 core 10 Sqmm PVC Aluminium armoured LTUG cable
f) 2 core 10 Sqmm PVC Aluminium armoured LTUG cable
117) Supplying and fixing of Brass cable Gland suitable for following PVC Aluminium armoured LTUG cable a) Brass cable gland for 3.5 core 120 Sqmm PVC Aluminium armoured LTUG cable
b) Brass cable gland for 3.5 core 70 Sqmm PVC Aluminium armoured LTUG cable
c) Brass cable gland for 3.5 core 25 Sqmm PVC Aluminium armoured LTUG cable
d) Brass cable gland for 4 core 16 Sqmm PVC Aluminium armoured LTUG cable
e) Brass cable gland for 4 core 10 Sqmm PVC Aluminium armoured LTUG cable
f) Brass cable gland for 2 core 10 Sqmm PVC Aluminium armoured LTUG cable
117.1) Supplying and fixing of cable end terminator suitable for following PVC Aluminium Armoured LTUG cable a) Crimping Lugs for 3.5 core 120 Sqmm. Aluminium Armoured LTUG cable
b) Crimping Lugs for 3.5 core 70 Sqmm. Aluminium Armoured LTUG cable
c) Crimping Lugs for 3.5 core 25 Sqmm. Aluminium Armoured LTUG cable
d) Crimping Lugs for 4 core 16 Sqmm. Aluminium Armoured LTUG cable
e) Crimping Lugs for 4 core 10 Sqmm. Aluminium Armoured LTUG cable
f) Crimping Lugs for 2 core 10 Sqmm. Aluminium Armoured LTUG cable
119) Supplying and delivery of 2 HP clear water vertical wet type submersible pumpset three phase suitable for borewell Duty - 50 lpm x 40 m
119.1) Supplying and delivery of 3 HP open well submersible pumpset suitable for borewell Duty - 50 lpm x 50 m
120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP
121.1) Supplying and fixing of three phase panel board of direct online starter with two level guard and auto start (2 HP)
122) Supplying and fixing of following dia of the GI, UPVC & GM specials a) 50mm dia GI Union
b) 50mm dia GI Hex Nipple
c) 50mm dia GI Bend
d) 50mm dia GM Non Return valve
e) 32 mm dia GM Gate valve (Heavy duty)
f) 20mm dia GM Gate valve (Heavy duty)
g) 25 mm dia GI Hex Nipple
h) 50mm dia UPVC Coupler
i) 50mm dia UPVC Elbow
j) 50mm dia UPVC Tee
k) 50 x 40mm dia UPVC Reducer Tee
123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable
124) Supplying and delivery of following dia GI pipes 'B' class in position a) 50mm dia GI pipe
124.1) Labour charges for laying of following dia GI pipe below ground level a) 50mm dia GI pipe
125.1) Supplying and laying of following dia UPVC pipe below ground level a) 50mm dia UPVC pipe
b) 32mm dia UPVC pipe
126.1) Supplying and fixing of 150mm dia M.S. Clamp set
127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump
128) Supplying of 40mm dia Cast Iron Adopter
129) Supplying and fixing of Tamilnadu Government Emblem of 3'-3" dia having brass edging logo brass plate
129.1) Supplying and fixing in position of Aluminium die casting TNPHC Logo emblem a) 60 cm size
130) Supplying and fixing of Aluminium Powder coated letters and Numbers a) Aluminium letters (Tamil) 12" size
b) Aluminium letter 9" size
130.1) Supplying and fixing of Plastic name board of required size
131.1) Supplying and fixing of Brass Name board with Brass letter of required size
132.1) Charges for developing the Borewell with Air compressor of 600 CFM capacity (Minimum 8 Hrs)
132.2) Drilling of Pilot bore of 140mm / 150mm dia any where in Tamilnadu including Transporation from one place to another within Tamilnadu in alluvial soil sedimentary strata or clay and sand stone shale pebbles boulders etc., a) Upto 76m depth ending below Ground Level
b) From 76m upto 91m depth ending below Ground Level
c) From 91m upto 107m depth ending from Ground Level
d) From 107m upto 122m depth ending from Ground Level
e) From 122m upto 137m depth ending from Ground Level
f) From 137m upto 152m depth ending from Ground Level
132.3) Reaming of 140/150 mm dia pilot bore to 300mm dia bore a) Upto 60m depth ending below ground level
b) From 60mdepth and upto 90m depth ending below ground level
133) Supplying and fixing of following dia PVC casing pipe as per IS 12818/2010 a) 150mm dia PVC Casing Pipe (Casing Medium Depth) above 80m
b) 150mm dia PVC Casing Pipe (Ribbed screen pipe)
133.1) Labour charges for inserting 150mm dia PVC casing pipe assembly (with slots or without slots) in the drilled hole including jointing the Pipes with PVC couplers with cement paste etc., complete
134) Supplying and fixing of 160mm dia PVC end cap suitable for covering the 150mm dia borewell casing pipe
134.2) Supplying of following dia UPVC column pipe for Borewell a) 40mm dia UPVC column pipe
134.3) Supplying and laying of PVC conduit pipe 25mm (1”) dia Heavy Gauge
139) Supplying and delivery of Godrej Navtal 7 levers – 3 keys lock
148) Supplying and fixing of RCC precast exhaust fan colar, outer 300mm dia
153) Supplying and fixing of MS angle of size 50X50x5mm MS angle to hold LTUG cable in Over Head portion
162) Supplying and fixing of 120W LED Street light fitting
162.1) Supply and fixing of 70 watts LED Street lighting fitting
163) Supplying and fixing of 18W LED 3000K square type recessed fitting with LED
255.1) Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick)
255.2) Providing and fixing of Glass partition with 10mm thick
344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm
361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick
367) Providing wooden melamen polish for main door new wood work
373) Supplying and installation of Air conditioner with copper coil 2 TR split type AC unit 3 star rated
373.1) Supplying and installation of Air conditioner with copper coil 1.5 TR split type AC unit 3 star rated
374.1) Supplying and laying of 5/8" and 3/8" Copper pipe (Extra beyond 3 metres supplied with AC unit) in position
375) Supplying and installation of 5 KVA capacity automatic voltage stabilizer with time delay relay arrangements
379.6) Supplying and fixing of Sinthetic grey Granite slab for flooring (Super fine Polished with machine cut edges) of sizes 4'x2' and above 18mm to 20mm thick
383.4.1) Supplying and fixing of stainless steel sink of size 600 x 450mm x 200mm thick
448.2) Providing Tee with end cap 32mm dia instead of PVC Bottle trap
Lightening Arrestor 501) Supplying and installation of advanced Early streamer Emitter type lighting Arrestor
502) Supply and installation of 18mm copper rod size of 8 feet length buried in earth etc.,
503) Supply and installation of 50mm dia GI mast of 5 Mtrs length with insulators
504) Supply and installation of 70 Sqmm copper braided / solid sheathed cable
DG set arrangements 516) Supply, installation, testing and commissioning of 100 KVA generator set
517) Insulation for the residential silencer (Supply of residential silencer to be included under item for DG sets)
518) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator
519) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer
520) Supply and installation of MS exhaust pipe of suitable thickness with 125mm dia complete wih MS wall / ceiling support etc.,
521) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool
522) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe
523) Preparation of necessary drawings for both Diesel Generator sets for approval (The building is fed by HT power supply)
524) Providing safety equipments : CO2 fire extinguisher, 1 No, 9 lit capacity fire buckets - 3 Nos. and rubber mat - 1 No.
Cabling and End Termination 525) Supply and laying of XLPE, aluminium conductor 1.1 KV grade armoured, MV cable of the following size in the existing cable trays / trenches as required generally confirming to IS 1554/Part-I/1970 a) 3.5 core x 185 Sqmm Aluminium cable
526) Supply and fixing of brass cable suitable gland for XLPE armoured Aluminium LTUG cable for following size with earth connection a) 3.5 core x 185 Sqmm Aluminium cable
527) Supply and providing cable end termination for following size of XLPE armoured Aluminium LTUG cable with necessary Aluminium cable sockets by crimping etc., a) Cable end termination for 3.5 core x 185 Sqmm Aluminium cable
528) Earthing as per the ISI speciication with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm with copper plate of size 125mmx50mmx6mm
529) Plate earthing as per the ISI specification with an earth electrode of 2.10m class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 600x600x3mm
530) Supply and run of 2 of No. 8 tin coated copper for earth connections
531) Providing and fixing 25mmx3mm copper strip on surface or in recess for connections as required
Fire Fighting arrangements 533) Supply and installation of 12 zone automatic fire alarm panel with fire and fault indications
534) Supply and installation of photo Electric smoke detectors with base and led to operate on 24 V DC supply etc.,
535) Supply and installation of heat detector to operate on 24 V DC supply make system sensor WL secutron
536) Supply and installation of Electronic hooter 5 watts capacity wall mounting type
537) Supply and installation of manual call point with hammer and chain
538) Supply and installation of 2x1.5 Sqmm copper cable, in casing capping 1%" PVC conduict junction boxes, glands, clamp etc.,
539) Supply and installation of responsible indicator for smoke decuctor inside rooms
540) Supply and installation of ABC type fire Extinguishers, cylindrical in shape wall mounting type with initial charges and discharge nozzle capacity 6 Kg with ISI marked
541) Supply and installation of CO2 type fire Extinguishers, wall mounting type cylindrical in shape with discharge horn capacity 4.5 Kgs
Provision for Lift arrangements 542) Supply, Erection and Commissioning of 1 No. of Passengers Lift (8 Persons - 544 Kgs) (Gearless Lift without machine room)
543) Lioson charges for CEIG approved for 8 person lift and 100 KVA Genset in all etc
543.1) Annual Maintenance charges for 2nd year (5% of capital cost)
543.2) Annual Maintenance charges for 3rd year (5% of capital cost)
543.3) Annual Maintenance charges for 4th year (5% of capital cost)
543.4) Annual Maintenance charges for 5th year (5% of capital cost)
552) Supply and erection of 250 Amps capcity floor mounting / wall mounting Panel board (cubical type) with bus bar chamber
553) Supply and erection of 125 Amps capcity floor mounting / wall mounting Panel board (cubical type) with bus bar chamber
563.1) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB Distribution board
563.2) Supply and fixing of 600mm x 600mm x 3mm copper flat on wall in the lift machine room
564) Wiring for lift well light point and socket outlet with 2x1.5 Sqmm FRLS PVC insulated stranded copper conductor of 1100 V grade
566) Supply and fixing of AC/DC 76mm Buzzer / call bell suitable for 230 volts 50c/s single phase AC supply on suitable TW Board with Push switch
566.1) Supply and fixing of Manhole cover SFRC for the size of 750mm x 750mm
567) Supplying, fixing and testing and commissioning of MCCB/MCB/Isolator in a sheet steel enclosure on surface/recess including inter connection, Painting etc., a) 40 A TPN 10 KA MCB
b) 10/20/32A DP 10KA MCB
c) 63A TPN 10 KA MCB
568) Supplying and fixing of three phase UPS (Three phase In & Single phase out) capacity-7.5 KVA system with battery 2 hours back-up
568.1) Supplying and fixing of three phase UPS (Three phase In & Single phase out) capacity-15 KVA system with battery 2 hours back-up
572) Towards fabrication, Supply and installation of CT metering box for availabling the power supply from TANGEDCO
610) Supply and fixing of perforated cable trays without cover made out of 14 SWG CRCA sheet steel of following size a) 150 x 50mm
610.1) Supply and fixing of perforated cable trays with cover made out of 14 SWG CRCA sheet steel of following size a) 300 x 50mm
615) Supplying and fixing of Vertical blind Premium
616) Supply and fixing of Air Curtains with high quality international standards casing
617) Supply and fixing of Top box of size 0.90x0.30x0.60m made of 19mm thick BWR plywood (ISI)
618) Providing and fixing of Glass doors with 10mm thick
619) Supply and fixing of Lab Table of following size made of 19mm thick ISI BWR plywood with 1mm thick merino plain colour a) Table of size (4.35x1.50x0.75)
b) Table of size (1.80x0.60x0.75)
620) Supplying and laying of PVC pipe of 32mm dia with necessary specials
622) Supply and fixing of 75mm thick Aluminium frame in Centre 50mm Aluminium frame in both side and 1200mm height
623) Supply and fixing of Chair 18mm Round 18 Gauge frame
649) supplying and Installation and testing of the following Biomatric & card based access control system a) Supply of IP based 4 door access control panel
b) Supply of door access card
c) Supply of Biometric K30 Device
d) Supply of EM Lock and L Bracket
e) Supply of Exit switch
f) Supply and laying of 4 core cable 1.5 Sqmm.
g) Supply and laying of 8 core cable 1.5 Sqmm.
h) Testing and installation charges of access control system
796) Two coat of Exterior emulsion paint including primer for outer wall surfaces
796.1) Two coat of Plastic emulsion paint including primer for inner wall surfaces
marimuthu gounder and co
A VELANI
M.Mohamed Hussain
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_334639.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .