KMC/WS/ARSM/58/2025-26

PROVIDING & FIXING OF ISI MARKED (IS: 15778-2007) RIGID CPVC DRAIN WATER PIPING 6 KG/CM2 WITH FITTINGS LIKE ELBOW, SOCKET, TEE ETC & SUPPORT WITH MS HANGER ON CEILING OR RECESSED IN WALL WITH CHASING & PLASTERING WITH 6 MM THICK CLOSED CELL ELASTOMERIC NITRILE RUBBER INSULATION COMPLETE IN ALL RESPECT.A) 20MM DIA.UNIFIED SCHEDULE RATES (M&E) PART A IRRIGATION & WATERWAYS DEPARTMENT,10 TH MAY 2022)

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF SUCTION /DISCHARGE COOPER PIPE LINE IN SPLIT AIR CONDITION UNIT 1.0/1.5 TR/2 TR/3 TR CAPACITY INCLUDINGBRAZING, NITRILE RUBBER INSULATION 6/9 MMTHICK CLASS 'O',ETC COMPLETE AS REQUIRED. COPPER TUBE 5/8". UNIFIEDSCHEDULE RATES (M&E) PART A IRRIGATION & WATERWAYS DEPARTMENT,10 TH MAY 2022)

GAS CGARGING (R410A/ECO FRIENDLY GREEN GAS )OF WINDOW/ SPLIT AIR CONDITIONING UNIT INCLUDING FLUSHING OF COOLING & CONDENSING UNITS WITH NITROGEN GAS & RECTIFICATION OF LEACKAGE , REPLACEMENT OF FILTER, FLAIR NUT ETC .IF ANY. 2.0 TRUNIFIED SCHEDULE RATES (M&E) PART A IRRIGATION & WATERWAYS DEPARTMENT,10 TH MAY 2022)

Supply & delivery of the following 50 Hz, AC, Direct on Line Starter of continuous duty in sheet steel enclosure (make L&T/ABB/SCHNEIDER):2 HP Single Phase (Max. Relay range 10.5-17.5 Amp)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire brand(approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire brand(approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand 6-32 A TP

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter brand(approved by EIC) with 25A Modular switch type DP MCB(c-curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

SUPPLY & FIXING MS POWDER COATED STAND SUITABLE FOR 1.0/1.5/2.0 TR OUTDOOR TYPE OF SPLIT AC. ALL AS PER PRE-APPROVED BY ENGINEER IN CHARGE

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 7. Supplying, fitting, fixing bolts with nuts, washer (i) 10 to 16 mm dia: (a) Length up to 75 mm

SCHEDULE OF RATES FOR SUPPLYING AND FIXING(approved MATERIALS (Main Switches, Fittings, Fans)Supplying and fixing Sheet steel Main Switches on flat iron frame on wall 240V DP with fuse on L&N 30/32 A Havells

BUILDING WORKS (G) WOOD AND PVC WORKS G. WALL PANELLING 14Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof.In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1.5mm (For upper floors refer to item H(4) for items 13, 14, 15, 16 under subhead G

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC. 1. Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof.

BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 3. Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly b) Extra for additional 3.6 height or part thereof

BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 4. Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety

UNIFIED SCHEDULE OF RATES(M&E) PAGE NO.- 66 LABOUR RATES ELECTRICIAN

UNIFIED SCHEDULE OF RATES (M&E) PAGE NO-66 LABOUR RATES HELPER FOR ELECTRICIAN

UNIFIED SCHEDULE OF RATES (M&E) PAGE NO- 66 LABOUR RATES MAZDOOR(MALE/FEMALE)

Fixing only starters ( FOR motor control) on flat iron frame / angle iron frame on wall Direct on Line starter FOR motor (upto 5 HP) On higher angel iron

Sub Total

Please Enable Macros to View BoQ information