PROVN OF TOILET BLOCK SHED AND ALLIED WORK AT BLDG NO T-73 CAMPBELL LINE AND PROVN OF LIVING ACCN OR AND TOILET BLOCK NEAR BLDG NO RAMC-1 AND PROVN OF STORE ROOM NEAR BLDG NO 229 UNDER GE WEST LUCKNOW

Amount

Excavation in trenches n exc 1.5 m wide and not exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or smilar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm complete all as specified & directed.

M&L cement concrete 1:4:8 type D-2 using 40 mm graded stone agg in foundation, filling and mass concrete complete all as specified and directed.

M&L Brick work with fly ash Brick straight or curve on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M & L for Brick Work with flyash old size brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm in soil complete all as specified and directed.

Removing excavated materials to a distance n exc 50 mtr and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and direced.

M&L for rendering 15 mm thick in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. Note : Water proofing compound shall be measured and paid separately under respective item.

M&L 40 mm thick DPC with water proofing compound in PCC 1:2:4 type B-0 (using 12.5mm graded stone aggt) in horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M & L for 20mm thick bearing plaster in cement mortar 1:4 using water proofing compound @ 3% by weight of cement and complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

S&F 10mm dia and over TMT bar, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

S&F for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers, and binders, cut to length, bent to shape required including including cranking bending spirally for hooping fpr columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, and other similar bands, plinth courses, string courses, lacing courses, parapets and railings, copings, kneelers, apex stone, bed plates, water troughs and the like including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M & L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for hardcore of broken stone or boulders of gauge n.exc 63mm deposited spread and levelled in layers n .exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M & L for 75mm thick cement concrete (1:4:8) type D2 using (40mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for 15mm dia GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M & L for 20mm dia GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for 25mm dia GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but n.exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layers of mortar for laying floor finishes with 1:4 CM complete all as specified and directed.

M & L for coloured glazed ceramic tiles 300 x 450 x 7mm thick as or vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S & F CP Bib taps 15mm fancy type Chromium plated cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F WHB vitreous China white flat back size 550 x 400mm incl brackets, waste coupling and waste pipe including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S & F 15mm bore pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets complete all as specified and directed.

S & F CP stop/angle valves 15mm bore fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F for PVC connection pipe 15mm bore 450mm long complete all as specified and directed.

S & F for rotational moulded triple layered polyethylene water storage tank cylindrical hoisted & fixed in position all as specified capacity 1000 ltrs complete all as specified and directed.

S & F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

S & F vitreous china squatting pan Orissa patern long pan size 580 x 440mm with CI trap long neck 100mm with integral foot rest & fixing including making good floor to match complete all as specified and directed.

S & F steel chromium plated urinal spreader suitable for bowl type urinal complete all as specified and directed.

S & F vitreous china bowl type urinal flat back, size of 465x355x265 mm white with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:4 complete all as specified and as directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and / or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

S & F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

M & L for 3mm thick figured glass pin headed type incl glazing with putty in squares area n.exc 0.5Sqm in each pane complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain coloured PVC sheet reinforced with MS square tube etc all as specified and directed. Make : Rajshree/Sintex.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed i n MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc all as specified. Make : Rajshree/sintex.

S & F 300mm long aluminium alloy, sliding door bolt with hasp & staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S & F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specifed and directed.

S & F for aluminium anodized barrel tower bolts 200mm of extruded section and fixed complete all as specifed and directed.

S & F stainless steel butt hinges 100mm medium weight and fixed complete all as specifed and directed.

S & F Gun metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F Gun metal, globe or gate valves 25mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

S & F glass corner self fancy type 250x250 and 10mm thick fixed it with brass bracket and screwed complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F CP brass (tabular towel rail) 20mm dia D type aluminium anodised, 60cm long between flange complete all as specified and directed.

S & F 100mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S & F cast iron bends (any radius) diminishing pieces or tapers for 100mm dia complete all as specified and directed.

S & F 75mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S & F 75mm bore CI tee single (equal or unequal), ordinary or inverted (spigot or socketed type)or with parellel branches complete all as specified and as directed.

S & F cast iron bends (any radius) diminishing pieces or tapers for 75mm dia complete all as specified and directed.

S & F 75mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S & F 75mm dia cast iron cowl complete all as specified and directed.

M & L for cast iron floor trap with grating in repair including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) for 75mm dia of outlet complete all as specified and directed.

M & L for 150mm dia salt glazed stone ware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M & L for concrete bed to drain pipes 1:4:8 type D-2 including packing under and haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified and directed

M & L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in benching complete all as specified and directed.

M&L for 25mm Sand cushioning under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking pavor block of 60 mm thick (M-35 Grade) of any shape and size confirming to IS-15658-2006 as in hard standing with grey cement and pigment complete all as specified and directed.

S & F steel work in roof trusses (framed), truss, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, agnle channel or flat sections including distance pieces, cleats etc. confirming to Fe -410 grade-250 B complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new steel surface of any description over 10cm width and girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F steel work in tabular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 Grade St-240

M&L for mild steel plates cut to size and shaped as required at site and welding as directed at site complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Material and Labour for rendering 15mm thick in CM 1:4 on brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed by Engr-in-Charge.

M & L for exterior grade cement concrete tiles of Ist quality 10-12mm thick as in floors/ pavings etc sett and jointed in neat cement slurry and pointed with mixtured of white cement and pigment over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes with 1:4 cement mortar complete all as specified and directed.

S & F Steel water tubing 80 mm bore with screwed & socket joints, medium grade, galvanized (including short lengths) with and including all necessary fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches complete as per IS-1239 part-II all as specified and directed.

S & F Steel water tubing 50 mm bore with screwed & socket joints, medium grade, galvanized (including short lengths) with and including all necessary fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches complete as per IS-1239 part-II all as specified and directed.

S & F Steel water tubing 40 mm bore with screwed & socket joints, medium grade, galvanized (including short lengths) with and including all necessary fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches complete as per IS-1239 part-II all as specified and directed.

S & F Gun Metal gate valve of 40 mm bore with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

M & L for Cutting in position existing 40mm bore steel pipe in position for inserting new Tee/short pieces of required size including scewing / threading complete all as specified and directed.

M & L for Cutting in position existing 50mm bore steel pipe in position for inserting new Tee/short pieces of required size including scewing / threading complete all as specified and directed

Drilling and tapping cast iron water mains in postion for branch connection of the 20 mm bore complete all as specified and directed.

M&L for construction of valve pit masonary chamber of size 1000x1000x1000 mm (internal dimension) using PCC 1:4:8 type D2 using 40 mm graded stone aggreagte for foundation, 15 mm thick rendering all around the brick work with 1:6 cement mortar, PCC 1:2:4 type B1 in coping with 20mm graded stone aggreagate for grouting MS frame made out of 40x40x5 mm thick angle iron including painting of steel surfaces with two coat of synthetic enamel paint over a coat of red oxide primers finishing coat, MS frame inclduing 4 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement .inclduing necessary excavation in any type of soil returning filling in and removal of surplus soil to a distance not exceeding 50 meter complete all as specified and directed.

S&F Sluice valve connection & testing 'ISI marked' both ends flanged and drilled cast iron body 80mm bore class PN-1.6 conforming to IS-14846/2000 complete with stainless steel spindle including necessary nut bolts etc complete all as specified and directed .

Cutting of road (in hard/ dense soil ) for laying pipe line or repair to pipes / lead joints etc .of any size upto 01 mtr. Depth and upto 0.6 mtr width and getting out incluiding forming bottom surface to required level and making good the disturbed road as per existing complete all as specified and directed.

Drilling/boaring (horizontally) for laying of pipe upto 200mm bore by penumatic tool or horizontal boaring/drilling machine under the existing road (max. 10 mtr. In width) suitable for passing GI/CI/DI tubing complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

M & L for RCC M-25(20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC M-25(20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC M-25(20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts and chazza etc complete all as specified and directed.

M & L for RCC M-25(20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M & L for form work to edges of conc flats exc 10 but nexc 20cm wide complete all as specified and directed.

M&L Brick work with fly ash Brick straight or curve on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Labour only for Earth filling under floor and Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required ( item retrived from excavation shall be reused)

M & L for treating the backfill in contact with foundation at the rate of 7.5 ltr of emulsion per sqm of vertical surface

M & L for treating the top surface of filled earth at the rate of 5 ltrs of emulsion per sqm of surface area

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per sqm of the perimeter wall

M & L for 25mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor all as specified and directed.

M & L 5mm thick rendering on ceiling in CM 1:3 with finished even and fair complete all as specified.

S&F vitrified tiles, coloured, superior quality 8 to 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and dismantling of existing tiles complete all as specified and directed.

S&F vitrified tiles, coloured, superior quality 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and directed.

M&L mild steel work as in bands, straps, supports or clamps; hold fasts; wall ties; and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.

Supply and fixed 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded, fitted without sash barss all as specified.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing

S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.

Supply & fix MS Butt hinges "medium weight" cold rolled mild steel 100mm size as directed.

Supply & fix 150mm long alumunium anodised barrel tower bolts of extructed section as directed.

S&F 18/19mm thick ply wood, grade BWR type BB quality, fixed with screw/nails to timber frame work complete all as specified and directed.

M&L 0.90mm thick Decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and directed.

S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters.

S&F 100mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Powder coating Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified

S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.

S&F two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, as per manufacturer's specification, complete all as specified and directed.

M&L preparation of new plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete.

S&F 25mm dia stainless steel curtain rod, superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

Supply & Fixing Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15mm bore pipe for wall and wash hand basin complete as specified.

Supply & Fixing CP shower rose fancy type 125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed.

M&L Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect complete all as specified and directed.

Supply and fixing of vitreous china wash hand basin flat back size 550x400mm and including brackets and CP waste coupling 32mm dia complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding complete all as specified and directed.

S&F PVC (SWR) pipes in any legnth fixed to wall 110 mm bore complete all as directed.

S&F PVC (SWR) pipes in any lenth fixed to wall 75 mm bore complete all as directed.

S&F PVC bends 110 mm bore complete all as directed.

S&F PVC bends 75 mm bore complete all as directed.

Supply and fixed 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete.

S&F PVC(SWR) branch piece,single equal or unequal 110mm dia

S&F PVC Cowls 75mm dia

Demolition of brick work built in CM including all quions, arches, pillars etc all as directed.

Taking down steel tubing and connection 15/20mm bore incl cleaning for refixing or removing from site all as specified.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Dismantling of existing roof treatment and cleaning of prepared roof surface by washing and rubbing etc. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.4 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) Applying a tack coat of hot blown grade 85/25 @ 1.2 Kg/Sqm over APP membrane. (f) Applying two coats of aluminium paint over polymeric membrane complete all as specified and directed. Note :- PCC padding or rendering as required for smooth roof surface shall be measured and paid for seperately under relevant item

M&L 10mm thick screed bed or bedding layer in CM 1:4 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with 3% integral water proofing compound complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate. (ii) Wherever screed bed shall be provided, PCC padding shall not be provided

M & L for RCC M-25 as in Chajjas complete all as specified.

M & L for Formwork to chullah hoods, chajjas, troughs and similar items including edges of rough finished surface complete all as spesified and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all not exceeding 20cm wide.

M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 including making 40mm dia hole @ 150c/c (if required) complete all as specified and directed. Note: Reinforcement shall be measured and paid seprately.

M&L for rendering 15 mm thick in CM 1:4 using 100% coarse sand on roof surface with 3% by weight of cement provided as floating / setting coat of cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately under respective item.

M & L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15cm but n exc 30cm in width or girth; including cutting to edges, all mitres and stopped ends, etc.

M & L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor all as specified and directed.

S & f Glass dividing strips, 3mm thick and ditto

S & F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

M & L for 3mm thick plain sheet glass ordinary quality incl glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F Pressed steel frames of size 125 x 60mm made of 1.25mm thick PBI sheet for doors with one or more rebates including necessary fixing lugs, lock strike plate etc complete all as specified and directed.

M & L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per above item No 159 but one socket outlet point 5 Amp on an independent board

All as per above item No 159 on the same board 5 Amp

All as per above item No 159 but in casing in caping on surface

S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

S & F ceiling rose surface bakelite three terminal complete as directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed.

S&F angle holder complete all specified and as directed.

S & F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 415Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB single pole 10 to 40 Amp 240 volts 10 KA breaking capacity complete all as specified and directed.

S & F FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as specified and directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

Supply & fix fan regulator electronic step type for ceiling fan fixed, in existing board and connecting as directed,

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq mm 4 core complete all as specified and directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) all as specified and directed

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable all as specified and directed.

S& F of Mild steel galvanized tubes light grade ISI marked 40mm bore laid in trenches / road crossing/ fixed to pole /walls/path/drain/floor etc all as specified and as directed by Engineer-in-Charge.

S & F of ceiling fan 1200 mm sweep, BEE star rated (40-50 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cod of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 250 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed.

M & L for earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 3 of MES SSR Pt-I 2009 print and as directed.

M/S Reliance Construction

QUALITY CONSTRUCTIONS CO