CLEANING OF MANHOLES, SEWAGE LINE, SEPTIC TANK AND REPLACEMENT OF SEWAGE LINE IN THE AREA OF AGE BR -I UNDER GE SAUGOR

Amount

M&L for cleaning of septic tank of any capacity by mechnical means including vaccume suction, taking off suitable capacity fitted with vaccume sunction pump of capacity not less than 15 cum/hr and deposited the sludge and water outside the MOD land complete all as specified and directed upto entire satisaction of Engr-in-charge.

M&L for cleaning of sewage line SWG/CI pipe/ RCC pipe/PVC pipe etc vertically/horizontally of dia n.exc 200 mm by rodding and well flushing by using sufficient water and making it clear for easy flow of sewage from WC, gully trap, Nahani trap etc upto the first manhole including desludging of first manhole and making it the proper functional and removing the sludge, silt away from bldgs etc upto a distance exc 50 m and n.exc 500 m and burying it in pits and covered with earth complete all as specified and directed upto entire satisaction of Engr-in-charge

All as per Srl item No 02 here -in-before but length of sewage line cleaned manhole to manhole complete by rodding and well flushing with sufficient water, length of sewage line upto 10 M including desludging of both sides existing manholes complete to entire satisfaction of Engineer-in-Charge.

All as per Srl item No 02 here -in-before but length of sewage line cleaned exc 10 M but n.exc 25 M from manhole to manhole including desludging of both sides existing manholes complete to entire satisfaction Engineer-n-Charge.

M&L for cleaning of blockage of gully traps, Nahani traps, Floor traps incl removing gratings and re-fixing old or new gratings with white cement complete all as directed by Engr-in-charge.

Dewatering of soak well of any dia and depth completely by pumping out the water and removing it to nearby nala where directed complete all as specified and directed by Engineer-in-charge.

M&L for cleaning of man holes of any size and depth by any means and getting out sludge and water and removing to a distance upto 100 mtr and burried into pits covered with 20cm thick soil complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceiling , chajja etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for brickwork with subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:4 using bricks of crushing strength not less then 75 Kg/ Sqcm including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed

M&L for brickwork with subclass 'B' old size bricks, circular well steining (any radius) constructed from base or curb not exc 6m mean radius built in cement mortar 1:4 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed

M&L for brick work with subclass 'B' bricks in one brick thick honey comb walling built in CM 1:4 complete all as per specified and directed.

M&L for brick bats using subclass 'B' bricks for loose filling in soak wells etc complete all as per specified and directed.

M&L for cutting into existing manholes for (dia 150mm / 200mm) connecting new or old drains making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work / concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

S&F 110 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps including taking down old unservicable SWR pipe of any dia iclcuding fittings complete all as specified and directed

All as per Srl item No 15 here -in-before but laid in trenches or in floors complete all as specified and directed

S&F 75 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps including taking down old unservicable SWR pipe of any dia iclcuding fittings complete all as specified and directed

All as per Srl item No 17 here -in-before but laid in trenches or in floors complete all as specified and directed..

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends of bore 110mm with acess door complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia with acess door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single ( single T ) equal or unequal 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm dia junction, with acess door single(single 'T') equal or unequal complete all as specified and directed .

S&F in repairs 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant cement including PCC 1:2:4 and making good the existing floor complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed.

M&L for M-25 design mix (using 20mm graded stone aggregates) as in slabs supported on walls as in soak well and septic tank including demolition of RCC of roof, beams, landing, chajja, cover slabs and similar suspended work complete all as specified and directed.

M&L for pre-cast reinforced cement concrete M-25 design mix (using 20mm graded stone aggregates) as in cover slab of mane hole set in cement mortar 1:4 including demolition of RCC of roof, beams, landing, chajja, cover slabs and similar suspended work complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as flat or curved roof slabs, floor slabs n exc 200mm thick finished fair or curved concrete surface complete all as specified and directed..

M&L for form work to edges of concrete flats, roofs, etc.., not exc 20cm wide and sides of RCC / PCC bands in walls, horizontal or slopping and similar works of fair finished concrete surfaces complete all as specified and directed..

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel round bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending as in manhole covers handles, steps, rungs etc complete all as specified and directed.

M&L for cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete including demolition of cement concrete of any description and in any position complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

All as per Srl item No.36 above but exc 1.50 M depth not exc 3.00m depth

Removing excavated soil exceeding 500 m distance and n exc 1.50 km depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming with soil in layers n exc 25 cm thick complete all as specified and directed.

M&L for RCC pipes with socket 150mm dia class NP2 (ISI Marked) laid and jointed with cement mortar complete with collars including demolition and breaking up RCC drain pipe of 150mm bore set in cement mortar complete all as specified and directed.

M&L for RCC pipes with socket 200mm dia class NP2 (ISI Marked) laid and jointed with cement mortar complete with collars including demolition and breaking up RCC drain pipe of 200mm bore complete all as specified and directed.

S&F HDPE double wall corrugated sewage pipe 150 mm internal dia, SN-8 as per IS 16908 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instructions including demolition and breaking up drain pipes (salt glazed ware) of 150mm bore complete all as specified and directed. Make:Gemini-Tirupati Plastimatics Pvt Ltd, Jaipur (Raj)/ Keshav Kripa Polyplast (LLP), Kishangarh (Raj)/ Supreme Ultra Plus, Mumbai

S&F HDPE double wall corrugated sewage pipe 200 mm internal dia, SN-8 as per IS 16908 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instructions including demolition and breaking up drain pipes (salt glazed ware) of 200mm bore complete all as specified and directed. Make:Gemini-Tirupati Plastimatics Pvt Ltd, Jaipur (Raj)/ Keshav Kripa Polyplast (LLP), Kishangarh (Raj)/ Supreme Ultra Plus, Mumbai

M&L for 100mm thick cement concrete1:4:8, type D2 (using 40mm graded stone aggregates) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete for 150 mm bore pipe complete all as specified and directed..

M&L for 150mm thick cement concrete1:4:8, type D2 (using 40mm graded stone aggregates) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete for 200 mm bore pipe complete all as specified and directed..

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in copings/ bands and benching,floors and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.. .

S&F in repairs cast iron pipes of 100 mm dia (Class 'A') with spigot and socket ends centrifugally cast for fixing to Septic tank as in air pipe complete all as specified and directed..

M&L for cast iron fittings like bend, cowl, tee, connecting pieces and tappers etc complete all as specified and directed

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and n. exc. 0.18 sqm as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match with colour of tiles laid over and including 15mm thick screed bed in CM 1:6 and dismantling of existing floor tlies, terrazo,etc with cement mortar bedding (but not backing), removal servicable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350mm x 250mm x 7mm / 450mm x 300mm x7 to 8mm thick, coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match the colour of tiles laid over & including 15mm thick rendering in CM 1:4 and dismantling of wall tiles / terrazo with cement mortar bedding (but not backing) removal servicable tiles to store and rubbish off the premises complete all as specified and directed.

S&F in repairs vitreous China urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and union for discharge pipe , waste pipe (excluding flushing cistern,flush pipe ) complete all as specified and directed..

S&F in repairs vitreous Chinaware EWC pedastal type closet with white seat & cover with flat bottom with hinging device complete all as specified and directed..

S&F in repairs vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including P or S Trap, etc complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15mm bore GI tubing and connection complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm bore GI tubing and connection complete all as specified and directed.

S&F in repairs chromium plated bib taps of 15mm bore, cast copper alloy fancy conceled type two way with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs choromium plated brass health jet foucet suitable for EWC including CP chord and brass nozzle and fixed to pipe complete all as specified and directed.

S&F in repairs soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed

S&F in repairs chromium plated bib taps of 15mm bore, cast copper alloy fancy conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs angular/ concealed stop valve , 15mm bore cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

M&L for treatement for sunken portion as follows :-

Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.

Water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement.

Applying two coats of Dr Fixit compound or equivalent make as approved by GE suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces.

PCC 1:4:8 type D2 (using 40 mm graded stone aggregates) as in filling (sunken portion)

75mm thick PCC 1:2:4 type B0 (using 12.50mm graded stone aggregates) mixed with WPC @ 2% by weight of cement as in sub base

Note :- The above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr Fixit or equivalent make as approved by GE suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measered. (d) WPC shall be measured and paid separately

M/S PRAKASH RAIKWAR TRADERS AND CO

m/s shivansh traders

Tiwarinassociates

m/s mahendra kumar khare contractor