REPAIRS/ RESURFACING OF ROAD, ROAD FURNITURE AND ROAD MARKING AT BEG AND CENTRE, AJIT VIHAR KHADKI UNDER AGE B/R-II UNDER GE (CENTRAL) KHADKI

Amount

M & L for repairs to potholes ,n. exc 1 Sqm each including sweeping free from dust and mud,or water,scoring sunken surfaces in roads,paths,etc cutting around edges to atleast 25mm in depth,making good by applying tack coat@5kg per 10sq m, putting in premixed bituminous macadam,well rammed and sealed with binder 9.8kg per 10Sq m,blinded with 0.09Cum of stone chippings,6.3mm size and well rammed(including supply of premixed macadam,binder and chipping)depth of potholes exc 30mm complete all as specified and directed by Engr-in-charge.

Scarifying or picking gravelled,macadam or bituminous macadam surfaces in area not exc 400sqm ,exc 50mm and n exc 100mm deep complete all as specified and directed by Engr-in-charge.

Preparing Unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engr-in-charge.

M&L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm with sprayer over existing surface etc complete all as specified and directed by Engr-in-charge.

M&L for 7.5cm thick (compacted thickness) WBM,with Granite,trap or basalt stone coarse aggregates of grading 2(63 to 40mm size) or of grading 3 (50mm to 20 mm size) spread rolled and consolidated to gradient and camber all as specified & directed by Engr-in-charge.

Ditto all as per item No. 5 but except materials

M & L for Premix bituminous macadam with 4% binder of VG-30 (Paving bitumen any penetration) laid/rolled and compacted to required gradient and camber(consolidated thickness 75mm or less) complete all as specified & directed, Duly rolled and compacted to required camber and gradient with 8-12 tonne power roller etc complete all as specified and directed by Engr-in-charge. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site. (iii) In case variation in bitumen content as per approved mix design in comparison with the bitumen shall be adjusted with price adjustment

M&L for applying evenly a priming/tack coat with bituminous emultion RS-1 at 3 kg/10Sqm with sprayer over existing surface etc complete all as specified and directed by Engr-in-charge.

M & L Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc

M&L for applying a priming/tack coat with bituminous emultion RS-1 at 5Kg/10Sqm with sprayer over existing surface etc complete all as specified and directed by Engr-in-charge.

M&L for Bituminous premix asphaltic semi dense 30mm consolidated using paving bitumen any penetration with 5.5% binder content by weight of total mix,rolled and compacted to required camber and gradient, dully rolled and compacted to required camber and gradient with 8-12 tonne power roller and vibrating roller etc complete all as specified and directed by Engr-in-charge. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site. (iii) In case variation in bitumen content as per approved mix design in comparison with the bitumen shall be adjusted with price adjustment

S&F in repairs for round solar delinator of red coloured made out of aluminium housing and 1100mm height precast construction solar powered by SIEMENS monocrystal solar panel 2V 120 MA type of battery NI-CD 1.2 V 250 MAH and flash rate 2 Hz or 70 Hz view distance over 300 mtr fotted with 2 Hz EL-805,LEDs,flashing upto 12 hours of light at night and solar battery aumatically charge in day/sun light duly fixed with including excavation of post holes of size 250*250*500 mm in soil and fixed in PCC 1:3:6 type C1(using 20mm graded stone aggregate).

S & F in repairs for solar Stud made out of aluminium housing and precast construction solar powered by SIEMENS monocrystal solar panel 2V 120 MA type of battery NI-CD 1.2 V 250 MAH and flash rate 2 Hz or 70 Hz view distance over 300 mtr fitted with 2 Hz EL-805-3 pieces each side on 2 ends total 6 pieces LEDs,flashing upto 12 hours of light at night and solar battery aumatically charge in day/sun light duly fixed with cement and hardner size of stud 125 x 125 x 85 mm in red/yellow colours complete by Engr-in-charge.

S& F in repair in cat eyes ABS body with scratch and abrasion resistant micro prismatic polycarbonate and ultrasonically welded lens,temperature resistant body and lens, size 90mm x 110mm x 17mm (Red/yellow colours) complete all as directed by Engr-in-charge.

M&L for preparation of New/existing black bituminous road/concrete surface and painting lines dashes (continuous/interrupted), arrows,letters etc on road 2.5 + 0.5mm thick and n. exc 10cm wide with one coat of hot applied white /golden/yellow auto retro-reflective thermoplastic road marking paint with reflectory glass beads on bituminous road all as specified in clause 803.40 of MOSRT&H specification over a coat of self primer using special applicator machine as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete of any description and in any positon not other specifically provided for complete all as specified and directed as in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as per directed by EIC.

M&L for 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigments over sand cushioning complete all as per directed by EIC.

S&F in repairs Convex Safety Mirror 80 cms polycarbonate Traffic mirror unbreakable round wide angle Driveway mirror,Red in colour(light weight) with Adjustable Brackets and Nut bolts also including pole of 7 feet height and 2inch(50mm)Dia for installation complete all as directed by Engr-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by EIC.

S&F in repairs PVC Road Speed Breaker of size 350x250x50mm of yellow/black colour with 4 hole in each having 10 tons traffic capacity for installation complete all as directed complete all as directed by Engr-in-charge.

S&F Precast RCC round/cylindrical bollard M-35 grade cement concrete 950mm to 1500mm height X 150 mm dia and fixed in soil with PCC 1:3:6 type C1(using 20 mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge.

M&L Sand filing under floors or in foundation including watering & consolidation complete all as specified and directed by Engr-in-Charge.

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED

Shri Sant Cosntruction