PERIODICAL SERVICE AND OTHER B/R WORK AT VRG LINE, ME LINE, COD ESTATE, SUPPLY DEPOT AND NAPIER ROAD UNDER AGE B/R-I OF GE (I) KANPUR

Amount

M&L for preparation of old plastered surfaces of wall and applying one coat of white wash including removing/ brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified and directed.

All as per Item No 1 above but as on ceiling complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of colour wash including removing/ brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of oil bound distemper over a coat of putty. The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

All as per Item No 4 above but on surface of ceiling complete all as specified and directed.

All as per item No 4 above but applying two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment mechanically with electric paint remover dry wall sander machine and preparation of walls and applying two coat of oil bound distemper over and including wall care putty and a coat of primer. The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

All as per Item No 7 above but on surface of ceiling complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall and applying one coat of cement based paint of approved shade including brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified and directed.

M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of exterior weather proof anti algae over and including applying wall care putty . The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for complete removal of existing treatment mechanically with electric paint remover dry wall sander machine and preparation of walls and applying two coat of exterior emulsion paint (weather proof anti algae) over and including a coat of primer. The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. Note:-The quoted unit rates shall be inclusive of followings: a) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the above paint materials after approval by the GE. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work upto G+2 height and protective measures. (c) Removing of Nails, making good holes, cracks etc (d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (e) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (f) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (g) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for preparation of old wooden surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed.

Cutting and taking out grass shurbs, plants, small tree roots in building wherever periodical services to be carried out in OTM/ Md Accn in any position and at any height (two storey building) and treated with necessary chemical/ acid to avoid for this further growth and disturbed portion making good with PCC 1:2:4 type B0 using 12.5mm graded stone aggregate and 15mm thick plastering etc in CM (1:4) finished fair and even complete all as specified and directed. (Note : The cost of scaffolding and T&P required for repair will be deemed inclusive in this item).

Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Guniting wk and dismantiling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control and surface of guniting to be finished fair and even with and including 10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site including necessary painting,white wash, distemper/ exterior acrylic emulsion).All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractoron this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separetly.

M&L for Mild Steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as directed and specified.

M&L for Welded steel wire fabric weight n exc 4 Kg/sqm complete all as specified and directed.

M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished fair and even complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces of walls, finished fair and even complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions, surfaces finished fair and even complete all as specified and directed. Note:- WPC will be measured and paid separately.

M&L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash x complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint of approved shade complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of weather coat exterior paint over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed.

M&L for obliterating old writing of any description n.exc 0.1 Sqm with paint to match existing work complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian (n.exc 30 CM high) letters etc shall be painted with thick paint so that they stand out boldly and solidly whithout showing marks of brush marks complete all as specified and directed.

M&L for stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed.

Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and as directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.

Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed.

M&L for 50mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in floor finished even & smooth with using extra cement complete all as specified and directed.

S&F 3mm thick 48mm wide glass dividing strips, inserted in position conform to design complete all as specified and directed.

Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. (Note : Debris obtained from dismantling will be dispossed off as directed)

M&L 25mm thick PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in floor to receive tiles complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 42.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 44.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for non skid coloured heavy duty parking tiles of size 300x300x9-10 mm thick impact resistance over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C1(using 20 mm graded stone aggregate) as in plinth protection finished even and smooth wihtout using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:4 on brick masonry /concrete surfaces of walls including finished fair & even when concrete is still green on top of roof using water proofing compound complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Demolition brick tile/cement concrete tiles / APP membrance by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for cement concrete type B0 (1:2:4 ) (using 12.5 mm graded stone aggregate) as in padding, coping, roof kerb incl hunching, benching etc complete all as specified and directed.

M&L water proofing treatment to roof slab with APP modified polymeric membrane thickness not less than 3 mm plain membrane (weight of membrane not less than 3.50 Kg + 5% per Sqm) and weight of centre core polyster mat shall be 160 gram + 15% per Sqm and lower side finished with 10 to 15 micron thermo fusible polyethylene complete all as specified and directed by Engineer-in-Charge with following courses of descriptions below :- (a)The surface of roof, parapet and gutters and drains mouth etc over which waterproofing treatment is to be applied shall be thoroughly cleaned of all foreign matter, moss dust etc by wire-brushing and dusting. For cast iron/PVC drains outlets a grove shall be cut around to tuck in the treatment. Concrete angles-fillets provided at junctions between roofs and verticals faces of walls (parapet and other walls) around obstacles such as pipe, chimney stacks etc and other similar situation to ease up about corners. (b) On the prepared surface one coat of Solvent based bituminous primer shall be applied @ 0.35 to 0.50 Kg/sqm till the surface is properly impregnated. The time delay of laying of membrane after application of primer shall be as per manufacturer instructions. (c) Laying of polymeric waterproofing membrane and bonded completely to the substrate & the overlaps are then sealed /fused by flame torch as per manufacturer instructions. (d) The overlaps shall be of minimum 4 Inch (100 mm) side lap and 150mm at end sealed by the flame-torch.

M&L for preparation of new surfaces and applying two coats of aluminium paint over and including a coat of aluminium primer on membrane, over 10cm in width or girth complete all as specified and directed.

Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height including fittings/grids etc complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225 : 1987, Noncombustable as per BS 476 (part 4) - 1970 and light reflectance of 85% (minimum) including and to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

U.R ASSOCIATES (BID ID -3331280)

JEEWAN BUILDERS AND ENGINEERS (BID ID -3330330)

pk enterprises (BID ID -3331362)